CISCO-RTTMON-MIB Download

This module defines a MIB for Round Trip Time (RTT) monitoring of a list of targets, using a variety of protocols.

IPHost Network Monitor offer an easy way of SNMP monitoring your Cisco Servers, Routers, Switches, Bridges, Firewalls, Repeaters.

OID list for CISCO-RTTMON-MIB

rttMonApplVersion: Round Trip Time monitoring application version string. The format will be: 'Version.Release.Patch-Level: Textual-Description' For example: '1.0.0: Initial RTT Application'
rttMonApplMaxPacketDataSize: The maximum size of the data portion an echo packet supported by this RTT application. This is the maximum value that can be specified by (rttMonEchoAdminPktDataRequestSize + ARR Header) or (rttMonEchoAdminPktDataResponseSize + ARR Header) in the rttMonC ...
rttMonApplTimeOfLastSet: The last time at which a set operation occurred on any of the objects in this MIB. The managing application can inspect this value in order to determine whether changes have been made without retrieving the entire Administration portion of this MIB. This ...
rttMonApplNumCtrlAdminEntry: This object defines the maximum number of entries that can be added to the rttMonCtrlAdminTable. It is calculated at the system init time. The value is impacted when rttMonApplFreeMemLowWaterMark is changed.
rttMonApplReset: When set to 'reset' the entire RTT application goes through a reset sequence, making a best effort to revert to its startup condition. Any and all rows in the Overall Control Group will be immediately deleted, together with any associated rows in the Sta ...
rttMonApplPreConfigedReset: When set to 'reset' the RTT application will reset the Application Preconfigured MIB section. This will force the RTT application to delete all entries in the rttMonApplPreConfigedTable and then to repopulate the table with the current configuration. This ...
rttMonApplSupportedRttTypesTable: A table of which contains the supported Rtt Monitor Types. See the RttMonRttType textual convention for the definition of each type.
rttMonApplSupportedRttTypesEntry: A list that presents the valid Rtt Monitor Types.
rttMonApplSupportedRttTypes: This object indexes the supported 'RttMonRttType' types.
rttMonApplSupportedRttTypesValid: This object defines the supported 'RttMonRttType' types.
rttMonApplSupportedProtocolsTable: A table of which contains the supported Rtt Monitor Protocols. See the RttMonProtocol textual convention for the definition of each protocol.
rttMonApplSupportedProtocolsEntry: A list that presents the valid Rtt Monitor Protocols.
rttMonApplSupportedProtocols: This object indexes the supported 'RttMonProtocol' protocols.
rttMonApplSupportedProtocolsValid: This object defines the supported 'RttMonProtocol' protocols.
rttMonApplPreConfigedTable: A table of which contains the previously configured Script Names and File IO targets. These Script Names and File IO targets are installed via a different mechanism than this application, and are specific to each platform.
rttMonApplPreConfigedEntry: A list of objects that describe the previously configured Script Names and File IO targets.
rttMonApplPreConfigedType: This is the type of value being stored in the rttMonApplPreConfigedName object.
rttMonApplPreConfigedName: This is either one of the following depending on the value of the rttMonApplPreConfigedType object: - The file path to a server. One of these file paths must be used when defining an entry in the rttMonFileIOAdminTable table with 'fileIO' as the value of ...
rttMonApplPreConfigedValid: When this row exists, this value will be 'true'. This object exists only to create a valid row in this table.
rttMonApplProbeCapacity: This object defines the number of new probes that can be configured on a router. The number depends on the value of rttMonApplFreeMemLowWaterMark, free bytes available on the router and the system configured rttMonCtrlAdminEntry number. Equation: rttMonAp ...
rttMonApplFreeMemLowWaterMark: This object defines the amount of free memory a router must have in order to configure RTR. If RTR found out that the memory is falling below this mark, it will not allow new probes to be configured. This value should not be set higher (or very close to) ...
rttMonApplLatestSetError: An error description for the last error message caused by set. Currently, it includes set error caused due to setting rttMonApplFreeMemLowWaterMark greater than the available free memory on the router or not enough memory left to create new probes.
rttMonApplResponder: Enable or disable RTR responder on the router.
rttMonApplAuthTable: A table which contains the definitions for key-strings that will be used in authenticating RTR Control Protocol.
rttMonApplAuthEntry: A list that presents the valid parameters for Authenticating RTR Control Protocol.
rttMonApplAuthIndex: Uniquely identifies a row in the rttMonApplAuthTable. This is a pseudo-random number selected by the management station when creating a row via the rttMonApplAuthStatus object. If the pseudo-random number is already in use, an 'inconsistentValue' is retur ...
rttMonApplAuthKeyChain: A string which represents the key-chain name. If multiple key-strings are specified, then the authenticator will alternate between the specified strings.
rttMonApplAuthKeyString1: A string which represents a key-string name whose id is 1.
rttMonApplAuthKeyString2: A string which represents a key-string name whose id is 2.
rttMonApplAuthKeyString3: A string which represents a key-string name whose id is 3.
rttMonApplAuthKeyString4: A string which represents a key-string name whose id is 4.
rttMonApplAuthKeyString5: A string which represents a key-string name whose id is 5.
rttMonApplAuthStatus: The status of the Authentication row.
rttMonApplLpdGrpStatsReset: This object is used to reset certain objects within the rttMonLpdGrpStatsTable. When the object is set to value of an active LPD Group identifier the associated objects will be reset. The reset objects will be set to a value as specified in the object's ...
rttMonCtrlAdminTable: A table of Round Trip Time (RTT) monitoring definitions. The RTT administration control is in multiple tables. This first table, is used to create a conceptual RTT control row. The following tables contain objects which configure scheduling, information ...
rttMonCtrlAdminEntry: A base list of objects that define a conceptual RTT control row.
rttMonCtrlAdminIndex: Uniquely identifies a row in the rttMonCtrlAdminTable. This is a pseudo-random number selected by the management station when creating a row via the rttMonCtrlAdminStatus object. If the pseudo-random number is already in use an 'inconsistentValue' return ...
rttMonCtrlAdminOwner: Identifies the entity that created this table row.
rttMonCtrlAdminTag: A string which is used by a managing application to identify the RTT target. This string is inserted into trap notifications, but has no other significance to the agent.
rttMonCtrlAdminRttType: The type of RTT operation to be performed. This value must be set in the same PDU or before setting any type specific configuration. Note: The RTT operation 'lspGroup' cannot be created via this control row. It will be created automatically by Auto SAA L ...
rttMonCtrlAdminThreshold: This object defines an administrative threshold limit. If the RTT operation time exceeds this limit and if the conditions specified in rttMonReactAdminThresholdType or rttMonHistoryAdminFilter are satisfied, a threshold is generated.
rttMonCtrlAdminFrequency: Specifies the duration between initiating each RTT operation. This object cannot be set to a value which would be a shorter duration than rttMonCtrlAdminTimeout. When the RttMonRttType specifies an operation that is synchronous in nature, it may happen th ...
rttMonCtrlAdminTimeout: Specifies the duration to wait for a RTT operation completion. The value of this object cannot be set to a value which would specify a duration exceeding rttMonCtrlAdminFrequency. For connection oriented protocols, this may cause the connection to be clo ...
rttMonCtrlAdminVerifyData: When set to true, the resulting data in each RTT operation is compared with the expected data. This includes checking header information (if possible) and exact packet size. Any mismatch will be recorded in the rttMonStatsCollectVerifyErrors object. Som ...
rttMonCtrlAdminStatus: The status of the conceptual RTT control row. In order for this object to become active, the following row objects must be defined: - rttMonCtrlAdminRttType Additionally: - for echo, pathEcho based on 'ipIcmpEcho' and dlsw probes rttMonEchoAdminProtocol a ...
rttMonCtrlAdminNvgen: When set to true, this entry will be shown in 'show running' command and can be saved into Non-volatile memory.
rttMonCtrlAdminGroupName: If the operation is created through auto measure group creation, then this string will specify the group name to which this operation is associated.
rttMonEchoAdminTable: A table that contains Round Trip Time (RTT) specific definitions. This table is controlled via the rttMonCtrlAdminTable. Entries in this table are created via the rttMonCtrlAdminStatus object.
rttMonEchoAdminEntry: A list of objects that define specific configuration for RttMonRttType conceptual Rtt control rows.
rttMonEchoAdminProtocol: Specifies the protocol to be used to perform the RTT operation. The following list defines what protocol should be used for each probe type: echo, pathEcho - ipIcmpEcho / mplsLspPingAppl udpEcho - ipUdpEchoAppl tcpConnect - ipTcpConn http ...
rttMonEchoAdminTargetAddress: A string which specifies the address of the target.
rttMonEchoAdminPktDataRequestSize: This object represents the number of octets to be placed into the ARR Data portion of the request message, when using SNA protocols. For non-ARR protocols' RTT request/responses, this value represents the native payload size. REMEMBER: The ARR Header ove ...
rttMonEchoAdminPktDataResponseSize: This object represents the number of octets to be placed into the ARR Data portion of the response message. This value is passed to the RTT Echo Server via a field in the ARR Header. For non-ARR RTT request/response (i.e. ipIcmpecho) this value will be se ...
rttMonEchoAdminTargetPort: This object represents the target's port number. This object is applicable to udpEcho, tcpConnect and jitter probes.
rttMonEchoAdminSourceAddress: A string which specifies the IP address of the source. This object is applicable to all probes except dns, dlsw and sna.
rttMonEchoAdminSourcePort: This object represents the source's port number. If this object is not specified, the application will get a port allocated by the system. This object is applicable to all probes except dns, dlsw and sna.
rttMonEchoAdminControlEnable: If this object is enabled, then the RTR application will send control messages to a responder, residing on the target router to respond to the data request packets being sent by the source router. This object is not applicable to echo, pathEcho, dns and h ...
rttMonEchoAdminTOS: This object represents the type of service octet in an IP header. This object is not applicable to dhcp, dns, ethernetPing and ethernetJitter.
rttMonEchoAdminLSREnable: If this object is enabled then it means that the application calculates response time for a specific path, defined in rttMonEchoPathAdminEntry. This object is applicable to echo probe only.
rttMonEchoAdminTargetAddressString: A string which specifies the address of the target. This string can be in IP address format or a hostname. This object is applicable to dns probe only.
rttMonEchoAdminNameServer: A string which specifies the ip address of the name-server. This object is applicable to dns probe only.
rttMonEchoAdminOperation: A code that represents the specific type of RTT operation. This object is applicable to http and ftp probe only.
rttMonEchoAdminHTTPVersion: A string which specifies the version number of the HTTP Server. The syntax for the version string is . An example would be 1.0, 1.1 etc.,. This object is applicable to http probe only.
rttMonEchoAdminURL: A string which represents the URL to which a HTTP probe should communicate with. This object is applicable to http probe only.
rttMonEchoAdminCache: If this object is false then it means that HTTP request should not download cached pages. This means that the request should be forwarded to the origin server. This object is applicable to http probe only.
rttMonEchoAdminInterval: This value represents the inter-packet delay between packets and is in milliseconds. This value is currently used for Jitter probe. This object is applicable to jitter probe only.
rttMonEchoAdminNumPackets: This value represents the number of packets that need to be transmitted. This value is currently used for Jitter probe. This object is applicable to jitter probe only.
rttMonEchoAdminProxy: This string represents the proxy server information. This object is applicable to http probe only.
rttMonEchoAdminString1: This string stores the content of HTTP raw request. If the request cannot fit into String1 then it should be split and put in Strings 1 through 5. This string stores the content of the DHCP raw option data. The raw DHCP option data must be in HEX. If an ...
rttMonEchoAdminString2: This string stores the content of HTTP raw request. rttMonEchoAdminString1-5 are concatenated to form the HTTP raw request used in the RTT operation. This object is applicable to http probe only.
rttMonEchoAdminString3: This string stores the content of HTTP raw request. rttMonEchoAdminString1-5 are concatenated to form the HTTP raw request used in the RTT operation. This object is applicable to http probe only.
rttMonEchoAdminString4: This string stores the content of HTTP raw request. rttMonEchoAdminString1-5 are concatenated to form the HTTP raw request used in the RTT operation. This object is applicable to http probe only.
rttMonEchoAdminString5: This string stores the content of HTTP raw request. rttMonEchoAdminString1-5 are concatenated to form the HTTP raw request used in the RTT operation. This object is applicable to http probe only.
rttMonEchoAdminMode: A code that represents the specific type of RTT operation. This object is applicable to ftp probe only.
rttMonEchoAdminVrfName: This field is used to specify the VPN name in which the RTT operation will be used. For regular RTT operation this field should not be configured. The agent will use this field to identify the VPN routing Table for this operation.
rttMonEchoAdminCodecType: Specifies the codec type to be used with jitter probe. This is applicable only for the jitter probe. If codec-type is configured the following parameters cannot be configured. rttMonEchoAdminPktDataRequestSize rttMonEchoAdminInterval rttMonEchoAdminNumPac ...
rttMonEchoAdminCodecInterval: This field represents the inter-packet delay between packets and is in milliseconds. This object is applicable only to jitter probe which uses codec type.
rttMonEchoAdminCodecPayload: This object represents the number of octets that needs to be placed into the Data portion of the message. This value is used only for jitter probe which uses codec type.
rttMonEchoAdminCodecNumPackets: This value represents the number of packets that need to be transmitted. This value is used only for jitter probe which uses codec type.
rttMonEchoAdminICPIFAdvFactor: The advantage factor is dependant on the type of access and how the service is to be used. Conventional Wire-line 0 Mobility within Building 5 Mobility within geographic area 10 Access to hard-to-reach location 20 This will be used while calcula ...
rttMonEchoAdminLSPFECType: The type of the target FEC for the RTT 'echo' and 'pathEcho' operations based on 'mplsLspPingAppl' RttMonProtocol. ldpIpv4Prefix - LDP IPv4 prefix.
rttMonEchoAdminLSPSelector: A string which specifies a valid 127/8 address. This address is of the form 127.x.y.z. This address is not used to route the MPLS echo packet to the destination but is used for load balancing in cases where the IP payload's destination address is used for ...
rttMonEchoAdminLSPReplyMode: This object specifies the reply mode for the LSP Echo requests.
rttMonEchoAdminLSPTTL: This object represents the TTL setting for MPLS echo request packets. For ping operation this represents the TTL value to be set in the echo request packet. For trace operation it represent the maximum ttl value that can be set in the echo request packets ...
rttMonEchoAdminLSPExp: This object represents the EXP value that needs to be put as precedence bit in the MPLS echo request IP header.
rttMonEchoAdminPrecision: This object specifies the accuracy of statistics that needs to be calculated milliseconds - The accuracy of stats will be of milliseconds microseconds - The accuracy of stats will be in microseconds. This value can be set only for jitter operation
rttMonEchoAdminProbePakPriority: This object specifies the priority that will be assigned to probe packet. This value can be set only for jitter operation
rttMonEchoAdminOWNTPSyncTolAbs: This object specifies the total clock synchronization error on source and responder that is considered acceptable for oneway measurement when NTP is used as clock synchronization mechanism. The total clock synchronization error is sum of NTP offsets on s ...
rttMonEchoAdminOWNTPSyncTolPct: This object specifies the total clock synchronization error on source and responder that is considered acceptable for oneway measurement when NTP is used as clock synchronization mechanism. The total clock synchronization error is sum of NTP offsets on s ...
rttMonEchoAdminOWNTPSyncTolType: This object specifies whether the value in specified for oneway NTP sync tolerance is absolute value or percent value
rttMonEchoAdminCalledNumber: This string stores the called number of post dial delay. This object is applicable to voip post dial delay probe only. The number will be like the one actualy the user could dial. It has the number required by the local country dial plan, plus E.164 numbe ...
rttMonEchoAdminDetectPoint: A code that represents the detect point of post dial delay. This object is applicable to SAA post dial delay probe only.
rttMonEchoAdminGKRegistration: A boolean that represents VoIP GK registration delay. This object is applicable to SAA GK registration delay probe only.
rttMonEchoAdminSourceVoicePort: A string which specifies the voice-port on the source gateway. This object is applicable to RTP probe only.
rttMonEchoAdminCallDuration: Duration of RTP/Video Probe session. This object is applicable to RTP and Video probe.
rttMonEchoAdminLSPReplyDscp: This object specifies the DSCP value to be set in the IP header of the LSP echo reply packet. The value of this object will be in range of DiffServ codepoint values between 0 to 63. Note: This object cannot be set to value of 255. This default value speci ...
rttMonEchoAdminLSPNullShim: This object specifies if the explicit-null label is to be added to LSP echo requests which are sent while performing RTT operation.
rttMonEchoAdminTargetMPID: This object specifies the destination maintenance point ID. It is only applicable to ethernetPing and ethernetJitter operation. It will be set to 0 for other types of operations.
rttMonEchoAdminTargetDomainName: This object specifies the name of the domain in which the destination maintenance point lies. It is only applicable to ethernetPing and ethernetJitter operation.
rttMonEchoAdminTargetVLAN: This object specifies the ID of the VLAN in which the destination maintenance point lies. It is only applicable to ethernetPing and ethernetJitter operation. It will be set to 0 for other types of operations.
rttMonEchoAdminEthernetCOS: This object specifies the class of service in an Ethernet packet header. It is only applicable to ethernetPing and ethernetJitter operation.
rttMonEchoAdminLSPVccvID: This object specifies MPLS LSP pseudowire VCCV ID values between 1 to 2147483647. Note: This object cannot be set to value of 0. This default value specifies that VCCV is not set for this row.
rttMonEchoAdminTargetEVC: This object specifies the Ethernet Virtual Connection in which the destination maintenance point lies. It is only applicable to ethernetPing and ethernetJitter operation. It will be set to NULL for other types of operations.
rttMonEchoAdminTargetMEPPort: This object specifies that Port Level CFM testing towards an Outward/Down MEP will be used. It is only applicable to ethernetPing and ethernetJitter operation. It will be set to NULL for other types of operations.
rttMonEchoAdminVideoTrafficProfile: A string which represents the profile name to which a video probe should use. This object is applicable to video probe only.
rttMonEchoAdminDscp: This object represents the Differentiated Service Code Point (DSCP) QoS marking in the generated synthetic packets. Value - DiffServ Class 0 - BE (default) 10 - AF11 12 - AF12 14 - AF13 18 - AF21 20 - AF22 22 - AF23 26 - AF31 28 - AF32 30 - AF33 34 - AF41 ...
rttMonEchoAdminReserveDsp: This object represents the video traffic generation source. be : best effort using DSP but without reservation gs : guaranteed service using DSP with reservation na : not applicable for not using DSP
rttMonEchoAdminInputInterface: This object represents the network input interface on the sender router where the synthetic packets are received from the emulated endpoint source. This is used for path congruence with correct feature processing at the sender router. The user can get the ...
rttMonEchoAdminEmulateSourceAddress: This object specifies the IP address of the emulated source from which the synthetic packets would be generated. If this object is not specified, the emulated source IP address will by default be the same as rttMonEchoAdminSourceAddress. This object is ap ...
rttMonEchoAdminEmulateSourcePort: This object represents the port number of the emulated source from which the synthetic packets would be generated. If this object is not specified, the emulated source port number will by default be the same as rttMonEchoAdminSourcePort. This object is ap ...
rttMonEchoAdminEmulateTargetAddress: This object specifies the IP address of the emulated target by which the synthetic packets would be received. If this object is not specified, the emulated target IP address will by default be the same as rttMonEchoAdminTargetAddress. This object is appli ...
rttMonEchoAdminEmulateTargetPort: This object represents the port number of the emulated target by which the synthetic packets would be received. If this object is not specified, the emulated target port number will by default be the same as rttMonEchoAdminTargetPort. This object is appli ...
rttMonFileIOAdminTable: A table of Round Trip Time (RTT) monitoring 'fileIO' specific definitions. When the RttMonRttType is not 'fileIO' this table is not valid. This table is controlled via the rttMonCtrlAdminTable. Entries in this table are created via the rttMonCtrlAdminSta ...
rttMonFileIOAdminEntry: A list of objects that define specific configuration for 'fileIO' RttMonRttType conceptual Rtt control rows.
rttMonFileIOAdminFilePath: The fully qualified file path that will be the target of the RTT operation. This value must match one of the rttMonApplPreConfigedName entries.
rttMonFileIOAdminSize: The size of the file to write/read from the File Server.
rttMonFileIOAdminAction: The File I/O action to be performed.
rttMonScriptAdminTable: A table of Round Trip Time (RTT) monitoring 'script' specific definitions. When the RttMonRttType is not 'script' this table is not valid. This table is controlled via the rttMonCtrlAdminTable. Entries in this table are created via the rttMonCtrlAdminSta ...
rttMonScriptAdminEntry: A list of objects that define specific configuration for 'script' RttMonRttType conceptual Rtt control rows.
rttMonScriptAdminName: This will be the Name of the Script that will be used to generate RTT operations. This object must match one of the rttMonApplPreConfigedName entries.
rttMonScriptAdminCmdLineParams: This will be the actual command line parameters passed to the rttMonScriptAdminName when being executed.
rttMonScheduleAdminTable: A table of Round Trip Time (RTT) monitoring scheduling specific definitions. This table is controlled via the rttMonCtrlAdminTable. Entries in this table are created via the rttMonCtrlAdminStatus object.
rttMonScheduleAdminEntry: A list of objects that define specific configuration for the scheduling of RTT operations.
rttMonScheduleAdminRttLife: This object value will be placed into the rttMonCtrlOperRttLife object when the rttMonCtrlOperState object transitions to 'active' or 'pending'. The value 2147483647 has a special meaning. When this object is set to 2147483647, the rttMonCtrlOperRttLife ...
rttMonScheduleAdminRttStartTime: This is the time when this conceptional row will activate. This is the value of MIB-II's sysUpTime in the future. When sysUpTime equals this value this object will cause the activation of a conceptual Rtt row. When an agent has the capability to determine ...
rttMonScheduleAdminConceptRowAgeout: The amount of time this conceptual Rtt control row will exist when not in an 'active' rttMonCtrlOperState. When this conceptual Rtt control row enters an 'active' state, this timer will be reset and suspended. When this conceptual RTT control row enters ...
rttMonScheduleAdminRttRecurring: When set to true, this entry will be scheduled to run automatically for the specified duration equal to the life configured, at the same time daily. This value cannot be set to true (a) if rttMonScheduleAdminRttLife object has value greater or equal to 86 ...
rttMonReactAdminTable: A table of Round Trip Time (RTT) monitoring Notification and Trigger definitions. All Notification/Reactions are applied to all RTT End-to-End operations. Thus, they do not apply to hops along a path to the target, when RttMonRttType is 'pathEcho'. The f ...
rttMonReactAdminEntry: A list of objects that define RTT reaction operations.
rttMonReactAdminConnectionEnable: If true, a reaction is generated when a RTT operation to a rttMonEchoAdminTargetAddress (echo type) causes rttMonCtrlOperConnectionLostOccurred to change its value. Thus connections to intermediate hops will not cause this value to change.
rttMonReactAdminTimeoutEnable: If true, a reaction is generated when a RTT operation causes rttMonCtrlOperTimeoutOccurred to change its value. When the RttMonRttType is 'pathEcho' timeouts to intermediate hops will not cause rttMonCtrlOperTimeoutOccurred to change its value.
rttMonReactAdminThresholdType: This object specifies the conditions under which rttMonCtrlOperOverThresholdOccurred is changed: NOTE: When the RttMonRttType is 'pathEcho' this objects' value and all associated object values are only valid when RTT 'echo' operations are to the rttMonEc ...
rttMonReactAdminThresholdFalling: This object defines a threshold limit. If the RTT operation time falls below this limit and if the conditions specified in rttMonReactAdminThresholdType are satisfied, an threshold is generated.
rttMonReactAdminThresholdCount: This object defines the 'x' value of the xOfy condition specified in rttMonReactAdminThresholdType.
rttMonReactAdminThresholdCount2: This object defines the 'y' value of the xOfy condition specified in rttMonReactAdminThresholdType.
rttMonReactAdminActionType: Specifies what type(s), if any, of reaction(s) to generate if an operation violates one of the watched conditions: none - no reaction is generated trapOnly - a trap is generated nmvtOnly - an SNA NMVT is generated trigger ...
rttMonReactAdminVerifyErrorEnable: If true, a reaction is generated when a RTT operation causes rttMonCtrlOperVerifyErrorOccurred to change its value.
rttMonStatisticsAdminTable: A table of Round Trip Time (RTT) monitoring statistics definitions. The definitions in this table control what and how many entries will be placed into the rttMonStatsCaptureTable. The statistics capture table is a rollover table. When the rttMonStatisti ...
rttMonStatisticsAdminEntry: A list of objects that define RTT statistics capture operations.
rttMonStatisticsAdminNumHourGroups: The maximum number of groups of paths to record. Specifically this is the number of hourly groups to keep before rolling over. The value of one is not advisable because the group will close and immediately be deleted before the network management station ...
rttMonStatisticsAdminNumPaths: When RttMonRttType is 'pathEcho' this is the maximum number of statistics paths to record per hourly group. This value directly represents the path to a target. For all other RttMonRttTypes this value will be forced to one by the agent. NOTE: For 'pathEch ...
rttMonStatisticsAdminNumHops: When RttMonRttType is 'pathEcho' this is the maximum number of statistics hops to record per path group. This value directly represents the number of hops along a path to a target, thus we can only support 30 hops. For all other RttMonRttTypes this value ...
rttMonStatisticsAdminNumDistBuckets: The maximum number of statistical distribution Buckets to accumulate. Since this index does not rollover, only the first rttMonStatisticsAdminNumDistBuckets will be kept. The last rttMonStatisticsAdminNumDistBucket will contain all entries from its distri ...
rttMonStatisticsAdminDistInterval: The statistical distribution buckets interval. Distribution Bucket Example: rttMonStatisticsAdminNumDistBuckets = 5 buckets rttMonStatisticsAdminDistInterval = 10 milliseconds | Bucket 1 | Bucket 2 | Bucket 3 | Bucket 4 | Bucket 5 | | 0-9 ms | 10-19 ms ...
rttMonHistoryAdminTable: A table of Round Trip Time (RTT) monitoring history definitions. The definitions in this table control what and how many entries will be placed into the rttMonHistoryCollectionTable. The history collection table is a rollover table. When the rttMonHistor ...
rttMonHistoryAdminEntry: A list of objects that define RTT history collection operations.
rttMonHistoryAdminNumLives: The maximum number of history lives to record. A life is defined by the countdown (or transition) to zero by the rttMonCtrlOperRttLife object. A new life is created when the same conceptual RTT control row is restarted via the transition of the rttMonCt ...
rttMonHistoryAdminNumBuckets: The maximum number of history buckets to record. When the RttMonRttType is 'pathEcho' this value directly represents a path to a target. For all other RttMonRttTypes this value should be set to the number of operations to keep per lifetime. After rttMo ...
rttMonHistoryAdminNumSamples: The maximum number of history samples to record per bucket. When the RttMonRttType is 'pathEcho' this value directly represents the number of hops along a path to a target, thus we can only support 30 hops. For all other RttMonRttTypes this value will be ...
rttMonHistoryAdminFilter: Defines a filter for adding RTT results to the history buffer: none - no history is recorded all - the results of all completion times and failed completions are recorded overThreshold - the results of completion times over rttMonCtrlAd ...
rttMonCtrlOperTable: A table of which contains the Operational values for the probe, and the conceptual RTT control row. This table augments the rttMonCtrlAdminTable.
rttMonCtrlOperEntry: A list of objects that describe the current state of probe, and the conceptual RTT control row.
rttMonCtrlOperModificationTime: This object is updated whenever an object in the conceptual RTT control row is changed or updated.
rttMonCtrlOperDiagText: A string which can be used as an aid in tracing problems. The content of this field will depend on the type of target (rttMonEchoAdminProtocol). When rttMonEchoAdminProtocol is one of snaLU0EchoAppl, or snaLU2EchoAppl this object contains the name of the ...
rttMonCtrlOperResetTime: This object is set when the rttMonCtrlOperState is set to reset.
rttMonCtrlOperOctetsInUse: This object is the number of octets currently in use by this composite conceptual RTT row. A composite conceptual row include the control, statistics, and history conceptual rows combined. (All octets that are addressed via the rttMonCtrlAdminIndex in t ...
rttMonCtrlOperConnectionLostOccurred: This object will only change its value when the RttMonRttType is 'echo' or 'pathEcho'. This object is set to true when the RTT connection fails to be established or is lost, and set to false when a connection is reestablished. When the RttMonRttType is ' ...
rttMonCtrlOperTimeoutOccurred: This object will change its value for all RttMonRttTypes. This object is set to true when an operation times out, and set to false when an operation completes under rttMonCtrlAdminTimeout. When this value changes, a reaction may occur, as defined by rttM ...
rttMonCtrlOperOverThresholdOccurred: This object will change its value for all RttMonRttTypes. This object is changed by operation completion times over threshold, as defined by rttMonReactAdminThresholdType. When this value changes, a reaction may occur, as defined by rttMonReactAdminThresh ...
rttMonCtrlOperNumRtts: This is the total number of probe operations that have been attempted. This value is incremented for each start of an RTT operation. Thus when rttMonCtrlAdminRttType is set to 'pathEcho' this value will be incremented by one and not for very every hop al ...
rttMonCtrlOperRttLife: This object is decremented every second, until it reaches zero. When the value of this object is zero RTT operations for this row are suspended. This object will either reach zero by a countdown or it will transition to zero via setting the rttMonCtrlOp ...
rttMonCtrlOperState: The RttMonOperStatus object is used to manage the 'state' of the probe that is implementing conceptual RTT control row. This status object has six defined values: reset(1) - reset this entry, transition to 'pending' orderlyStop(2) - shutdown t ...
rttMonCtrlOperVerifyErrorOccurred: This object is true if rttMonCtrlAdminVerifyData is set to true and data corruption occurs.
rttMonLatestRttOperTable: A table of which contains the status of latest RTT operation. When the RttMonRttType is 'pathEcho', operations performed to the hops along the path will be recorded in this table. This table augments the RTT definition table, rttMonCtrlAdminTable.
rttMonLatestRttOperEntry: A list of objects that record the latest RTT operation.
rttMonLatestRttOperCompletionTime: The completion time of the latest RTT operation successfully completed. The unit of this object will be microsecond when rttMonCtrlAdminRttType is set to 'jitter' and rttMonEchoAdminPrecision is set to 'microsecond'. Otherwise, the unit of this object wil ...
rttMonLatestRttOperSense: A sense code for the completion status of the latest RTT operation.
rttMonLatestRttOperApplSpecificSense: An application specific sense code for the completion status of the latest RTT operation. This object will only be valid when the rttMonLatestRttOperSense object is set to 'applicationSpecific'. Otherwise, this object's value is not valid.
rttMonLatestRttOperSenseDescription: A sense description for the completion status of the latest RTT operation when the rttMonLatestRttOperSense object is set to 'applicationSpecific'.
rttMonLatestRttOperTime: The value of the agent system time at the time of the latest RTT operation.
rttMonLatestRttOperAddress: When the RttMonRttType is 'echo', 'pathEcho', 'udpEcho', 'tcpConnect', 'dns' and 'dlsw' this is a string which specifies the address of the target for this RTT operation. When the RttMonRttType is not one of these types this object will be null. This add ...
rttMonLatestHTTPOperTable: A table which contains the status of latest HTTP RTT operation.
rttMonLatestHTTPOperEntry: A list of objects that record the latest HTTP RTT operation. This entry is created automatically after the rttMonCtrlAdminEntry is created. Also the entry is automatically deleted when rttMonCtrlAdminEntry is deleted.
rttMonLatestHTTPOperRTT: Round Trip Time taken to perform HTTP operation. This value is the sum of DNSRTT, TCPConnectRTT and TransactionRTT.
rttMonLatestHTTPOperDNSRTT: Round Trip Time taken to perform DNS query within the HTTP operation. If an IP Address is specified in the URL, then DNSRTT is 0.
rttMonLatestHTTPOperTCPConnectRTT: Round Trip Time taken to connect to the HTTP server.
rttMonLatestHTTPOperTransactionRTT: Round Trip Time taken to download the object specified by the URL.
rttMonLatestHTTPOperMessageBodyOctets: The size of the message body received as a response to the HTTP request.
rttMonLatestHTTPOperSense: An application specific sense code for the completion status of the latest RTT operation.
rttMonLatestHTTPErrorSenseDescription: An sense description for the completion status of the latest RTT operation.
rttMonLatestJitterOperTable: A table which contains the status of latest Jitter operation.
rttMonLatestJitterOperEntry: A list of objects that record the latest Jitter operation.
rttMonLatestJitterOperNumOfRTT: The number of RTT's that were successfully measured.
rttMonLatestJitterOperRTTSum: The sum of Jitter RTT's that are successfully measured (low order 32 bits). The high order 32 bits are stored in rttMonLatestJitterOperRTTSumHigh.
rttMonLatestJitterOperRTTSum2: The sum of squares of RTT's that are successfully measured (low order 32 bits). The high order 32 bits are stored in rttMonLatestJitterOperRTTSum2High.
rttMonLatestJitterOperRTTMin: The minimum of RTT's that were successfully measured.
rttMonLatestJitterOperRTTMax: The maximum of RTT's that were successfully measured.
rttMonLatestJitterOperMinOfPositivesSD: The minimum of all positive jitter values from packets sent from source to destination.
rttMonLatestJitterOperMaxOfPositivesSD: The maximum of all positive jitter values from packets sent from source to destination.
rttMonLatestJitterOperNumOfPositivesSD: The sum of all positive jitter values from packets sent from source to destination.
rttMonLatestJitterOperSumOfPositivesSD: The sum of RTT's of all positive jitter values from packets sent from source to destination.
rttMonLatestJitterOperSum2PositivesSD: The sum of square of RTT's of all positive jitter values from packets sent from source to destination.
rttMonLatestJitterOperMinOfNegativesSD: The minimum of absolute values of all negative jitter values from packets sent from source to destination.
rttMonLatestJitterOperMaxOfNegativesSD: The maximum of absolute values of all negative jitter values from packets sent from source to destination.
rttMonLatestJitterOperNumOfNegativesSD: The sum of number of all negative jitter values from packets sent from source to destination.
rttMonLatestJitterOperSumOfNegativesSD: The sum of all negative jitter values from packets sent from source to destination.
rttMonLatestJitterOperSum2NegativesSD: The sum of square of RTT's of all negative jitter values from packets sent from source to destination.
rttMonLatestJitterOperMinOfPositivesDS: The minimum of all positive jitter values from packets sent from destination to source.
rttMonLatestJitterOperMaxOfPositivesDS: The maximum of all positive jitter values from packets sent from destination to source.
rttMonLatestJitterOperNumOfPositivesDS: The sum of number of all positive jitter values from packets sent from destination to source.
rttMonLatestJitterOperSumOfPositivesDS: The sum of RTT's of all positive jitter values from packets sent from destination to source.
rttMonLatestJitterOperSum2PositivesDS: The sum of squares of RTT's of all positive jitter values from packets sent from destination to source.
rttMonLatestJitterOperMinOfNegativesDS: The minimum of all negative jitter values from packets sent from destination to source.
rttMonLatestJitterOperMaxOfNegativesDS: The maximum of all negative jitter values from packets sent from destination to source.
rttMonLatestJitterOperNumOfNegativesDS: The sum of number of all negative jitter values from packets sent from destination to source.
rttMonLatestJitterOperSumOfNegativesDS: The sum of RTT's of all negative jitter values from packets sent from destination to source.
rttMonLatestJitterOperSum2NegativesDS: The sum of squares of RTT's of all negative jitter values from packets sent from destination to source.
rttMonLatestJitterOperPacketLossSD: The number of packets lost when sent from source to destination.
rttMonLatestJitterOperPacketLossDS: The number of packets lost when sent from destination to source.
rttMonLatestJitterOperPacketOutOfSequence: The number of packets arrived out of sequence.
rttMonLatestJitterOperPacketMIA: The number of packets that are lost for which we cannot determine the direction.
rttMonLatestJitterOperPacketLateArrival: The number of packets that arrived after the timeout.
rttMonLatestJitterOperSense: An application specific sense code for the completion status of the latest Jitter RTT operation.
rttMonLatestJitterErrorSenseDescription: An sense description for the completion status of the latest Jitter RTT operation.
rttMonLatestJitterOperOWSumSD: The sum of one way latency from source to destination (low order 32 bits). The high order 32 bits are stored in rttMonLatestJitterOperOWSumSDHigh.
rttMonLatestJitterOperOWSum2SD: The sum of squares of one way latency from source to destination (low order 32 bits). The high order 32 bits are stored in rttMonLatestJitterOperOWSum2SDHigh.
rttMonLatestJitterOperOWMinSD: The minimum of all one way latency from source to destination.
rttMonLatestJitterOperOWMaxSD: The maximum of all one way latency from source to destination.
rttMonLatestJitterOperOWSumDS: The sum of one way latency from destination to source (low order 32 bits). The high order 32 bits are stored in rttMonLatestJitterOperOWSumDSHigh.
rttMonLatestJitterOperOWSum2DS: The sum of squares of one way latency from destination to source (low order 32 bits). The high order 32 bits are stored in rttMonLatestJitterOperOWSum2DSHigh.
rttMonLatestJitterOperOWMinDS: The minimum of all one way latency from destination to source.
rttMonLatestJitterOperOWMaxDS: The maximum of all one way latency from destination to source.
rttMonLatestJitterOperNumOfOW: The number of successful one way latency measurements.
rttMonLatestJitterOperMOS: The MOS value for the latest jitter operation in hundreds. This value will be 0 if - rttMonEchoAdminCodecType of the operation is notApplicable - the operation is not started - the operation is started but failed
rttMonLatestJitterOperICPIF: Represents ICPIF value for the latest jitter operation
rttMonLatestJitterOperIAJOut: Interarrival Jitter (RC1889) at responder.
rttMonLatestJitterOperIAJIn: Interarrival Jitter (RFC1889) at source.
rttMonLatestJitterOperAvgJitter: The average of positive and negative jitter values in SD and DS direction for latest operation.
rttMonLatestJitterOperAvgSDJ: The average of positive and negative jitter values from source to destination for latest operation.
rttMonLatestJitterOperAvgDSJ: The average of positive and negative jitter values from destination to source for latest operation.
rttMonLatestJitterOperOWAvgSD: The average latency value from source to destination.
rttMonLatestJitterOperOWAvgDS: The average latency value from destination to source.
rttMonLatestJitterOperNTPState: A value of sync(1) means sender and responder was in sync with NTP. The NTP sync means the total of NTP offset on sender and responder is within configured tolerance level.
rttMonLatestJitterOperUnSyncRTs: The number of RTT operations that have completed with sender and responder out of sync with NTP. The NTP sync means the total of NTP offset on sender and responder is within configured tolerance level.
rttMonLatestJitterOperRTTSumHigh: The sum of Jitter RTT's that are successfully measured. (high order 32 bits). The low order 32 bits are stored in rttMonLatestJitterOperRTTSum.
rttMonLatestJitterOperRTTSum2High: The sum of squares of RTT's that are successfully measured (high order 32 bits). The low order 32 bits are stored in rttMonLatestJitterOperRTTSum2.
rttMonLatestJitterOperOWSumSDHigh: The sum of one way latency from source to destination (high order 32 bits). The low order 32 bits are stored in rttMonLatestJitterOperOWSumSD.
rttMonLatestJitterOperOWSum2SDHigh: The sum of squares of one way latency from source to destination (high order 32 bits). The low order 32 bits are stored in rttMonLatestJitterOperOWSum2SD.
rttMonLatestJitterOperOWSumDSHigh: The sum of one way latency from destination to source (high order 32 bits). The low order 32 bits are stored in rttMonLatestJitterOperOWSumDS.
rttMonLatestJitterOperOWSum2DSHigh: The sum of squares of one way latency from destination to source (high order 32 bits). The low order 32 bits are stored in rttMonLatestJitterOperOWSum2DS.
rttMonReactTriggerAdminTable: A table of which contains the list of conceptual RTT control rows that will start to collect data when a reaction condition is violated and when rttMonReactAdminActionType is set to one of the following: - triggerOnly - trapAndTrigger - nmvtAndTrigger ...
rttMonReactTriggerAdminEntry: A list of objects that will be triggered when a reaction condition is violated.
rttMonReactTriggerAdminRttMonCtrlAdminIndex: This object points to a single conceptual Rtt control row. If this row does not exist and this value is triggered no action will result. The conceptual Rtt control row will be triggered for the rttMonCtrlOperRttLife length. If this conceptual Rtt contro ...
rttMonReactTriggerAdminStatus: This object is used to create Trigger entries.
rttMonReactTriggerOperTable: A table of which contains the operational state of each entry in the rttMonReactTriggerAdminTable. This table augments the RTT trigger definition table, rttMonReactTriggerAdminTable.
rttMonReactTriggerOperEntry: A list of state objects for the rttMonReactTriggerAdminTable.
rttMonReactTriggerOperState: This object takes on the value active when its associated entry in the rttMonReactTriggerAdminTable has been triggered. When the associated entry in the rttMonReactTriggerAdminTable is not under a trigger state, this object will be pending. When this obje ...
rttMonEchoPathAdminTable: A table to store the hop addresses in a Loose Source Routing path. Response times are computed along the specified path using ping. This maximum table size is limited by the size of the maximum number of hop addresses that can fit in an IP header, which i ...
rttMonEchoPathAdminEntry: A list of objects that define intermediate hop's IP Address. This entry can be added only if the rttMonCtrlAdminRttType is 'echo'. The entry gets deleted when the corresponding RTR entry, which has an index of rttMonCtrlAdminIndex, is deleted.
rttMonEchoPathAdminHopIndex: Uniquely identifies a row in the rttMonEchoPathAdminTable. This number represents the hop address number in a specific ping path. All the indicies should start from 1 and must be contiguous ie., entries should be (say rttMonCtrlAdminIndex = 1) 1.1, 1.2, 1 ...
rttMonEchoPathAdminHopAddress: A string which specifies the address of an intermediate hop's IP Address for a RTT 'echo' operation
rttMonGrpScheduleAdminTable: A table of Round Trip Time (RTT) monitoring group scheduling specific definitions. This table is used to create a conceptual group scheduling control row. The entries in this control row contain objects used to define group schedule configuration paramete ...
rttMonGrpScheduleAdminEntry: A list of objects that define a conceptual group scheduling control row.
rttMonGrpScheduleAdminIndex: Uniquely identifies a row in the rttMonGrpScheduleAdminTable. This is a pseudo-random number selected by the management station when creating a row via the rttMonGrpScheduleAdminStatus object. If the pseudo-random number is already in use an 'inconsistent ...
rttMonGrpScheduleAdminProbes: A string which holds the different probes which are to be group scheduled. The probes can be specified in the following forms. (a) Individual ID's with comma separated as 23,45,34. (b) Range form including hyphens with multiple ranges being separated by a ...
rttMonGrpScheduleAdminPeriod: Specifies the time duration over which all the probes have to be scheduled.
rttMonGrpScheduleAdminFrequency: Specifies the duration between initiating each RTT operation for all the probes specified in the group. The value of this object is only effective when both rttMonGrpScheduleAdminFreqMax and rttMonGrpScheduleAdminFreqMin have zero values.
rttMonGrpScheduleAdminLife: This object specifies the life of all the probes included in the object rttMonGrpScheduleAdminProbes, that are getting group scheduled. This value will be placed into rttMonScheduleAdminRttLife object for each of the probes listed in rttMonGrpScheduleAdmi ...
rttMonGrpScheduleAdminAgeout: This object specifies the ageout value of all the probes included in the object rttMonGrpScheduleAdminProbes, that are getting group scheduled. This value will be placed into rttMonScheduleAdminConceptRowAgeout object for each of the probes listed in rttM ...
rttMonGrpScheduleAdminStatus: The status of the conceptual RTT group schedule control row. In order for this object to become active, the following row objects must be defined: - rttMonGrpScheduleAdminProbes - rttMonGrpScheduleAdminPeriod All other objects can assume default values. T ...
rttMonGrpScheduleAdminFreqMax: Specifies the max duration between initiating each RTT operation for all the probes specified in the group. If this is 0 and rttMonGrpScheduleAdminFreqMin is also 0 then rttMonGrpScheduleAdminFrequency becomes the fixed frequency.
rttMonGrpScheduleAdminFreqMin: Specifies the min duration between initiating each RTT operation for all the probes specified in the group. The value of this object cannot be greater than the value of rttMonGrpScheduleAdminFreqMax. If this is 0 and rttMonGrpScheduleAdminFreqMax is 0 the ...
rttMonGrpScheduleAdminStartTime: This is the time in seconds after which the member probes of this group specified in rttMonGrpScheduleAdminProbes will transition to active state
rttMonGrpScheduleAdminAdd: Addition of members to an existing group will be allowed if this object is set to TRUE (1). The members, IDs of which are mentioned in rttMonGrpScheduleAdminProbes object are added to the existing group
rttMonGrpScheduleAdminDelete: Removal of members from an existing group will be allowed if this object is set to TRUE (1). The members, IDs of which are mentioned in rttMonGrpScheduleAdminProbes object are removed from the existing group
rttMonGrpScheduleAdminReset: When this is set to true then all members of this group will be stopped and rescheduled using the previously set values of this group.
rttMplsVpnMonCtrlTable: A table of Auto SAA L3 MPLS VPN definitions. The Auto SAA L3 MPLS VPN administration control is in multiple tables. This first table, is used to create a conceptual Auto SAA L3 MPLS VPN control row. The following tables contain objects which used in type ...
rttMplsVpnMonCtrlEntry: A base list of objects that define a conceptual Auto SAA L3 MPLS VPN control row.
rttMplsVpnMonCtrlIndex: Uniquely identifies a row in the rttMplsVpnMonCtrlTable. This is a pseudo-random number selected by the management station when creating a row via the rttMplsVpnMonCtrlStatus object. If the pseudo-random number is already in use an 'inconsistentValue' ret ...
rttMplsVpnMonCtrlRttType: The type of RTT operation to be performed for Auto SAA L3 MPLS VPN. This value must be set in the same PDU of rttMplsVpnMonCtrlStatus. This value must be set before setting any other parameter configuration of an Auto SAA L3 MPLS VPN.
rttMplsVpnMonCtrlVrfName: This field is used to specify the VPN name for which the Auto SAA L3 MPLS VPN RTT operation will be used. This value must be set in the same PDU of rttMplsVpnMonCtrlStatus. The Auto SAA L3 MPLS VPN will find the PEs participating in this VPN and configure ...
rttMplsVpnMonCtrlTag: A string which is used by a managing application to identify the RTT target. This string will be configured as rttMonCtrlAdminTag for all the operations configured by this Auto SAA L3 MPLS VPN. The usage of this value in Auto SAA L3 MPLS VPN is same as rt ...
rttMplsVpnMonCtrlThreshold: This object defines an administrative threshold limit. This value will be configured as rttMonCtrlAdminThreshold for all the operations that will be configured by the current Auto SAA L3 MPLS VPN. The usage of this value in Auto SAA L3 MPLS VPN is same as ...
rttMplsVpnMonCtrlTimeout: Specifies the duration to wait for a RTT operation configured automatically by the Auto SAA L3 MPLS VPN to complete. The value of this object cannot be set to a value which would specify a duration exceeding rttMplsVpnMonScheduleFrequency. The usage of th ...
rttMplsVpnMonCtrlScanInterval: Specifies the frequency at which the automatic PE addition should take place if there is any for an Auto SAA L3 MPLS VPN. New RTT operations corresponding to the new PEs discovered will be created and scheduled. The default value for this object is 4 hour ...
rttMplsVpnMonCtrlDelScanFactor: Specifies the frequency at which the automatic PE deletion should take place. This object specifies the number of times of rttMonMplslmCtrlScanInterval (rttMplsVpnMonCtrlDelScanFactor * rttMplsVpnMonCtrlScanInterval) to wait before removing the PEs. This ...
rttMplsVpnMonCtrlEXP: This object represents the EXP value that needs to be put as precedence bit of an IP header.
rttMplsVpnMonCtrlRequestSize: This object represents the native payload size that needs to be put on the packet. This value will be configured as rttMonEchoAdminPktDataRequestSize for all the RTT operations configured by the current Auto SAA L3 MPLS VPN. The minimum request size for j ...
rttMplsVpnMonCtrlVerifyData: When set to true, the resulting data in each RTT operation created by the current Auto SAA L3 MPLS VPN is compared with the expected data. This includes checking header information (if possible) and exact packet size. Any mismatch will be recorded in the ...
rttMplsVpnMonCtrlStorageType: The storage type of this conceptual row. When set to 'nonVolatile', this entry will be shown in 'show running' command and can be saved into Non-volatile memory. By Default the entry will not be saved into Non-volatile memory. This object can be set to ei ...
rttMplsVpnMonCtrlProbeList: This object holds the list of probes ID's that are created by the Auto SAA L3 MPLS VPN. The probes will be specified in the following form. (a) Individual ID's with comma separated as 1,5,3. (b) Range form including hyphens with multiple ranges being sepa ...
rttMplsVpnMonCtrlStatus: The status of the conceptual Auto SAA L3 MPLS VPN control row. In order for this object to become active rttMplsVpnMonCtrlRttType, rttMplsVpnMonCtrlVrfName and rttMplsVpnMonSchedulePeriod objects must be defined. All other objects can assume default valu ...
rttMplsVpnMonCtrlLpd: When set to true, this implies that LPD (LSP Path Discovery) is enabled for this row. The Auto SAA L3 MPLS VPN will find all the paths to each of the PE's and configure RTT operation with rttMonCtrlAdminRttType value as 'lspGroup'. The 'lspGroup' probe wi ...
rttMplsVpnMonCtrlLpdGrpList: This object holds the list of LPD Group IDs that are created for this Auto SAA L3 MPLS VPN row. This object will be applicable only when LSP Path Discovery is enabled for this row. The LPD Groups will be specified in the following form. (a) Individual ID' ...
rttMplsVpnMonCtrlLpdCompTime: The completion time of the LSP Path Discovery for the entire set of PEs which are discovered for this Auto SAA. This object will be applicable only when LSP Path Discovery is enabled for this row.
rttMplsVpnMonTypeTable: A table that contains Auto SAA L3 MPLS VPN configured RTT operation specific definitions. This table is controlled via the rttMplsVpnMonCtrlTable. Entries in this table are created via the rttMplsVpnMonCtrlStatus object.
rttMplsVpnMonTypeEntry: A list of objects that define RTT operation specific configuration for an Auto SAA L3 MPLS VPN.
rttMplsVpnMonTypeInterval: This value represents the inter-packet delay between packets and is in milliseconds. This value is currently used for Jitter probe. This object is applicable to jitter probe only. The usage of this value in RTT operation is same as rttMonEchoAdminInterval ...
rttMplsVpnMonTypeNumPackets: This value represents the number of packets that need to be transmitted. This value is currently used for Jitter probe. This object is applicable to jitter probe only. The usage of this value in RTT operation is same as rttMonEchoAdminNumPackets.
rttMplsVpnMonTypeDestPort: This object represents the target's port number to which the packets need to be sent. This value will be configured as target port for all the operations that is going to be configured The usage of this value is same as rttMonEchoAdminTargetPort in RTT op ...
rttMplsVpnMonTypeSecFreqType: This object specifies the reaction type for which the rttMplsVpnMonTypeSecFreqValue should be applied. The Value 'timeout' will cause secondary frequency to be set for frequency on timeout condition. The Value 'connectionLoss' will cause secondary frequen ...
rttMplsVpnMonTypeSecFreqValue: This object represents the value that needs to be applied to secondary frequency of individual RTT operations configured by Auto SAA L3 MPLS VPN. Setting rttMplsVpnMonTypeSecFreqValue without setting rttMplsVpnMonTypeSecFreqType will not have any effect.
rttMplsVpnMonTypeLspSelector: A string which specifies the address of the local host (127.X.X.X). This object will be used as lsp-selector in MPLS RTT operations configured by the Auto SAA L3 MPLS VPN. When LSP Path Discovery is enabled for the row, this object will be used to indicat ...
rttMplsVpnMonTypeLSPReplyMode: This object specifies the reply mode for the LSP Echo requests originated by the operations configured by the Auto SAA L3 MPLS VPN. This object is currently used by echo and pathEcho.
rttMplsVpnMonTypeLSPTTL: This object represents the TTL setting for MPLS echo request packets originated by the operations configured by the Auto SAA L3 MPLS VPN. This object is currently used by echo and pathEcho. For 'echo' the default TTL will be set to 255. For 'pathEcho' the ...
rttMplsVpnMonTypeLSPReplyDscp: This object specifies the DSCP value to be set in the IP header of the LSP echo reply packet. The value of this object will be in range of DiffServ codepoint values between 0 to 63. Note: This object cannot be set to value of 255. This default value speci ...
rttMplsVpnMonTypeLpdMaxSessions: This object represents the number of concurrent path discovery requests that will be active at one time per MPLS VPN control row. This object is meant for reducing the time for discovery of all the paths to the target in a large customer network. However ...
rttMplsVpnMonTypeLpdSessTimeout: This object specifies the maximum allowed duration of a particular tree trace request. If no response is received in configured time the request will be considered a failure.
rttMplsVpnMonTypeLpdEchoTimeout: This object specifies the timeout value for the LSP echo requests which are sent while performing the LSP Path Discovery.
rttMplsVpnMonTypeLpdEchoInterval: This object specifies the send interval between LSP echo requests which are sent while performing the LSP Path Discovery.
rttMplsVpnMonTypeLpdEchoNullShim: This object specifies if the explicit-null label is added to LSP echo requests which are sent while performing the LSP Path Discovery. If set to TRUE all the probes configured as part of this control row will send the LSP echo requests with the explicit-n ...
rttMplsVpnMonTypeLpdScanPeriod: This object specifies the scan time for the completion of LSP Path Discovery for all the PEs discovered for this control row. If the scan period is exceeded on completion of the LSP Path Discovery for all the PEs, the next discovery will start immediately ...
rttMplsVpnMonTypeLpdStatHours: The maximum number of hours of data to be kept per LPD group. The LPD group statistics will be kept in an hourly bucket. At the maximum there can be two buckets. The value of 'one' is not advisable because the group will close and immediately be deleted b ...
rttMplsVpnMonScheduleTable: A table of Auto SAA L3 MPLS VPN monitoring scheduling specific definitions. This table is controlled via the rttMplsVpnMonCtrlTable. Entries in this table are created via the rttMplsVpnMonCtrlStatus object.
rttMplsVpnMonScheduleEntry: A list of objects that define specific configuration for the scheduling of RTT operations.
rttMplsVpnMonScheduleRttStartTime: This is the time when this conceptual row will activate. rttMplsVpnMonSchedulePeriod object must be specified before setting this object. This is the value of MIB-II's sysUpTime in the future. When sysUpTime equals this value this object will cause the ac ...
rttMplsVpnMonSchedulePeriod: Specifies the time duration over which all the probes created by the current Auto SAA L3 MPLS VPN have to be scheduled. This object must be set first before setting rttMplsVpnMonScheduleRttStartTime.
rttMplsVpnMonScheduleFrequency: Specifies the duration between initiating each RTT operation configured by the Auto SAA L3 MPLS VPN. This object cannot be set to a value which would be a shorter duration than rttMplsVpnMonCtrlTimeout. The usage of this value in RTT operation is same as ...
rttMplsVpnMonReactTable: A Table of Auto SAA L3 MPLS VPN Notification definitions. This table augments the rttMplsVpnMonCtrlTable.
rttMplsVpnMonReactEntry: A list of objects that define Auto SAA L3 MPLS VPN reaction configuration.
rttMplsVpnMonReactConnectionEnable: The value set for this will be applied as rttMonReactAdminConnectionEnable for individual probes created by the Auto SAA L3 MPLS VPN. When this object is set to true, rttMonReactVar for individual probes created by the Auto SAA L3 MPLS VPN will be set to ...
rttMplsVpnMonReactTimeoutEnable: The value set for this will be applied as rttMonReactAdminTimeoutEnable for individual probes created by the Auto SAA L3 MPLS VPN. When this object is set to true, rttMonReactVar for individual probes created by the Auto SAA L3 MPLS VPN will be set to 'ti ...
rttMplsVpnMonReactThresholdType: The value corresponding to this object will be applied as rttMonReactAdminThresholdType for individual probes created by the Auto SAA L3 MPLS VPN. The value corresponding to this object will be applied as rttMonReactThresholdType for individual probes cre ...
rttMplsVpnMonReactThresholdCount: This object value will be applied as rttMonReactAdminThresholdCount for individual probes created by the Auto SAA L3 MPLS VPN. This object value will be applied as rttMonReactThresholdCountX for individual probes created by the Auto SAA L3 MPLS VPN.
rttMplsVpnMonReactActionType: The value corresponding to this object will be applied as rttMonReactAdminActionType of individual probes created by this Auto SAA L3 MPLS VPN. The value corresponding to this object will be applied as rttMonReactActionType of individual probes created by ...
rttMplsVpnMonReactLpdNotifyType: This object specifies the type of LPD notifications to be generated for the current Auto SAA L3 MPLS VPN control row. This object will be applicable only when LSP Path Discovery is enabled for this row. There are two types of notifications supported for t ...
rttMplsVpnMonReactLpdRetryCount: This object value specifies the number of attempts to be performed before declaring the path as 'down'. Each 'single probe' which is part of 'lspGroup' probe will be retried these many times before marking it as 'down'. This object will be applicable only ...
rttMonReactTable: A table that contains the reaction configurations. Each conceptual row in rttMonReactTable corresponds to a reaction configured for the probe defined in rttMonCtrlAdminTable. For each reaction configured for a probe there is an entry in the table. Each Pr ...
rttMonReactEntry: A base list of objects that define a conceptual reaction configuration control row.
rttMonReactConfigIndex: This object along with rttMonCtrlAdminIndex identifies a particular reaction-configuration for a particular probe. This is a pseudo-random number selected by the management station when creating a row via the rttMonReactStatus. If the pseudo-random number ...
rttMonReactVar: This object specifies the type of reaction configured for a probe. The reaction types 'rtt', 'timeout', and 'connectionLoss' can be configured for all probe types. The reaction type 'verifyError' can be configured for all probe types except RTP probe type ...
rttMonReactThresholdType: This object specifies the conditions under which the notification ( trap ) is sent. never - rttMonReactOccurred is never set immediate - rttMonReactOccurred is set to 'true' when the value of parameter for which reaction is configured ( e.g rtt, j ...
rttMonReactActionType: Specifies what type(s), if any, of reaction(s) to generate if an operation violates one of the watched ( reaction-configuration ) conditions: none - no reaction is generated trapOnly - a trap is generated triggerOnly - all t ...
rttMonReactThresholdRising: This object defines the higher threshold limit. If the value ( e.g rtt, jitterAvg, packetLossSD etc ) rises above this limit and if the condition specified in rttMonReactThresholdType are satisfied, a trap is generated. Default value of rttMonReactThresho ...
rttMonReactThresholdFalling: This object defines a lower threshold limit. If the value ( e.g rtt, jitterAvg, packetLossSD etc ) falls below this limit and if the conditions specified in rttMonReactThresholdType are satisfied, a trap is generated. Default value of rttMonReactThreshold ...
rttMonReactThresholdCountX: If rttMonReactThresholdType value is 'xOfy', this object defines the 'x' value. If rttMonReactThresholdType value is 'consecutive' this object defines the number of consecutive occurrences that needs threshold violation before setting rttMonReactOccurred ...
rttMonReactThresholdCountY: This object defines the 'y' value of the xOfy condition if rttMonReactThresholdType is 'xOfy'. For other values of rttMonReactThresholdType, this object is not applicable.
rttMonReactValue: This object will be set when the configured threshold condition is violated as defined by rttMonReactThresholdType and holds the actual value that violated the configured threshold values. This object is not valid for the following values of rttMonReactVa ...
rttMonReactOccurred: This object is set to true when the configured threshold condition is violated as defined by rttMonReactThresholdType. It will be again set to 'false' if the condition reverses. This object is set to true in the following conditions: - rttMonReactVar is s ...
rttMonReactStatus: This objects indicates the status of the conceptual RTT Reaction Control Row.Only CreateAndGo and destroy operations are permitted on the row. When this object moves to active state, the conceptual row having the Reaction configuration for the probe is mo ...
rttMonStatsCaptureTable: The statistics capture database. The statistics capture table contains summarized information of the results for a conceptual RTT control row. A rolling accumulated history of this information is maintained in a series of hourly 'group(s)'. Each 'group' ...
rttMonStatsCaptureEntry: A list of objects which accumulate the results of a series of RTT operations over a 60 minute time period. The statistics capture table is a rollover table. When rttMonStatsCaptureStartTimeIndex groups exceeds the rttMonStatisticsAdminNumHourGroups value ...
rttMonStatsCaptureStartTimeIndex: The time when this row was created. This object is the second index of the rttMonStatsCaptureTable Table. The the number of rttMonStatsCaptureStartTimeIndex groups exceeds the rttMonStatisticsAdminNumHourGroups value, the oldest rttMonStatsCaptureStartTim ...
rttMonStatsCapturePathIndex: When the RttMonRttType is 'pathEcho', this object uniquely defines a path for a given value of rttMonStatsCaptureStartTimeIndex. For all other values of RttMonRttType, this object will be one. For a particular value of rttMonStatsCaptureStartTimeIndex, t ...
rttMonStatsCaptureHopIndex: When the RttMonRttType is 'pathEcho', this object uniquely defines a hop for a given value of rttMonStatsCapturePathIndex. For all other values of RttMonRttType, this object will be one. For a particular value of rttMonStatsCapturePathIndex, the agent as ...
rttMonStatsCaptureDistIndex: This object uniquely defines a statistical distribution bucket for a given value of rttMonStatsCaptureHopIndex. For a particular value of rttMonStatsCaptureHopIndex, the agent assigns the first instance of a distribution a value of 1, then second instance ...
rttMonStatsCaptureCompletions: The number of RTT operations that have completed without an error and without timing out. This object has the special behavior as defined by the ROLLOVER NOTE in the DESCRIPTION of the ciscoRttMonMIB object.
rttMonStatsCaptureOverThresholds: The number of RTT operations successfully completed, but in excess of rttMonCtrlAdminThreshold. This number is a subset of the accumulation of all rttMonStatsCaptureCompletions. The operation time of these completed operations will be accumulated. This ...
rttMonStatsCaptureSumCompletionTime: The accumulated completion time of RTT operations which complete successfully.
rttMonStatsCaptureSumCompletionTime2Low: The low order 32 bits of the accumulated squares of completion times (in milliseconds) of RTT operations which complete successfully. Low/High order is defined where the binary number will look as follows: ------------------------------------------------- ...
rttMonStatsCaptureSumCompletionTime2High: The high order 32 bits of the accumulated squares of completion times (in milliseconds) of RTT operations which complete successfully. See the rttMonStatsCaptureSumCompletionTime2Low object for a definition of Low/High Order.
rttMonStatsCaptureCompletionTimeMax: The maximum completion time of any RTT operation which completes successfully.
rttMonStatsCaptureCompletionTimeMin: The minimum completion time of any RTT operation which completes successfully.
rttMonStatsCollectTable: The statistics collection database. This table has the exact same behavior as the rttMonStatsCaptureTable, except it does not keep statistical distribution information. For a complete table description see the rttMonStatsCaptureTable object.
rttMonStatsCollectEntry: A list of objects which accumulate the results of a series of RTT operations over a 60 minute time period. This entry has the exact same behavior as the rttMonStatsCaptureEntry, except it does not keep statistical distribution information. For a complete ...
rttMonStatsCollectNumDisconnects: When the RttMonRttType is 'echo' or pathEcho', this object represents the number of times that the target or hop along the path to a target became disconnected. For all other values of RttMonRttType, this object will remain zero. For connectionless proto ...
rttMonStatsCollectTimeouts: The number of occasions when a RTT operation was not completed before a timeout occurred, i.e. rttMonCtrlAdminTimeout was exceeded. Since the RTT operation was never completed, the completion time of these operations are not accumulated, nor do they incre ...
rttMonStatsCollectBusies: The number of occasions when a RTT operation could not be initiated because a previous RTT operation has not been completed. When the RttMonRttType is 'pathEcho' this can occur for both connection oriented protocols and connectionless protocols. When the ...
rttMonStatsCollectNoConnections: When the RttMonRttType is 'echo' or 'pathEcho' this is the number of occasions when a RTT operation could not be initiated because the connection to the target has not been established. For all other RttMonRttTypes this object will remain zero. This cann ...
rttMonStatsCollectDrops: The number of occasions when a RTT operation could not be initiated because some necessary internal resource (for example memory, or SNA subsystem) was not available, or the operation completion could not be recognized. Since a RTT operation was never ini ...
rttMonStatsCollectSequenceErrors: When the RttMonRttType is 'echo' of 'pathEcho' this is the number of RTT operation completions received with an unexpected sequence identifier. For all other values of RttMonRttType this object will remain zero. When this has occurred some of the possibl ...
rttMonStatsCollectVerifyErrors: The number of RTT operation completions received with data that does not compare with the expected data. The completion time of these operations are not accumulated, nor do they increment rttMonStatsCaptureCompletions (in the expected Distribution Bucket ...
rttMonStatsCollectAddress: This object only applies when the RttMonRttType is 'echo', 'pathEcho', 'dlsw', 'udpEcho', 'tcpConnect'. For all other values of the RttMonRttType, this will be null. The object is a string which specifies the address of the target for the this RTT operati ...
rttMonStatsTotalsTable: The statistics totals database. This table has the exact same behavior as the rttMonStatsCaptureTable, except it only keeps 60 minute group values. For a complete table description see the rttMonStatsCaptureTable object.
rttMonStatsTotalsEntry: A list of objects which accumulate the results of a series of RTT operations over a 60 minute time period. This entry has the exact same behavior as the rttMonStatsCaptureEntry, except it only keeps 60 minute group values. For a complete entry description ...
rttMonStatsTotalsElapsedTime: The length of time since this conceptual statistics row was created.
rttMonStatsTotalsInitiations: The number of RTT operations that have been initiated. This number includes all RTT operations which succeed or fail for whatever reason. This object has the special behavior as defined by the ROLLOVER NOTE in the DESCRIPTION of the ciscoRttMonMIB object.
rttMonHTTPStatsTable: The HTTP statistics collection database. The HTTP statistics table contains summarized information of the results for a conceptual RTT control row. A rolling accumulated history of this information is maintained in a series of hourly 'group(s)'. The opera ...
rttMonHTTPStatsEntry: A list of objects which accumulate the results of a series of RTT operations over a 60 minute time period. This entry is created only if the rttMonCtrlAdminRttType is http. The operation of this table is same as that of rttMonStatsCaptureTable.
rttMonHTTPStatsStartTimeIndex: This is the time when this row was created. This index uniquely identifies a HTTP Stats row in the rttMonHTTPStatsTable.
rttMonHTTPStatsCompletions: The number of HTTP operations that have completed successfully.
rttMonHTTPStatsOverThresholds: The number of HTTP operations that violate threshold.
rttMonHTTPStatsRTTSum: The sum of HTTP operations that are successfully measured.
rttMonHTTPStatsRTTSum2Low: The sum of squares of the RTT's that are successfully measured (low order 32 bits).
rttMonHTTPStatsRTTSum2High: The sum of squares of the RTT's that are successfully measured (high order 32 bits).
rttMonHTTPStatsRTTMin: The minimum RTT taken to perform HTTP operation.
rttMonHTTPStatsRTTMax: The maximum RTT taken to perform HTTP operation.
rttMonHTTPStatsDNSRTTSum: The sum of RTT taken to perform DNS query within the HTTP operation.
rttMonHTTPStatsTCPConnectRTTSum: The sum of RTT taken to connect to the HTTP server.
rttMonHTTPStatsTransactionRTTSum: The sum of RTT taken to download the object specified by URL.
rttMonHTTPStatsMessageBodyOctetsSum: The sum of the size of the message body received as a response to the HTTP request.
rttMonHTTPStatsDNSServerTimeout: The number of requests that could not connect to the DNS Server.
rttMonHTTPStatsTCPConnectTimeout: The number of requests that could not connect to the the HTTP Server.
rttMonHTTPStatsTransactionTimeout: The number of requests that timed out during HTTP transaction.
rttMonHTTPStatsDNSQueryError: The number of requests that had DNS Query errors.
rttMonHTTPStatsHTTPError: The number of requests that had HTTP errors while downloading the base page.
rttMonHTTPStatsError: The number of occasions when a HTTP operation could not be initiated because an internal error
rttMonHTTPStatsBusies: The number of occasions when an HTTP operation could not be initiated because a previous HTTP operation has not been completed.
rttMonJitterStatsTable: The Jitter statistics collection database. The Jitter statistics table contains summarized information of the results for a conceptual RTT control row. A rolling accumulated history of this information is maintained in a series of hourly 'group(s)'. The o ...
rttMonJitterStatsEntry: A list of objects which accumulate the results of a series of RTT operations over a 60 minute time period. This entry is created only if the rttMonCtrlAdminRttType is jitter. The operation of this table is same as that of rttMonStatsCaptureTable.
rttMonJitterStatsStartTimeIndex: The time when this row was created.
rttMonJitterStatsCompletions: The number of jitter operation that have completed successfully.
rttMonJitterStatsOverThresholds: The number of jitter operations that violate threshold.
rttMonJitterStatsNumOfRTT: The number of RTT's that are successfully measured.
rttMonJitterStatsRTTSum: The sum of RTT's that are successfully measured (low order 32 bits). The high order 32 bits are stored in rttMonJitterStatsRTTSumHigh.
rttMonJitterStatsRTTSum2Low: The sum of squares of RTT's that are successfully measured (low order 32 bits).
rttMonJitterStatsRTTSum2High: The sum of squares of RTT's that are successfully measured (high order 32 bits).
rttMonJitterStatsRTTMin: The minimum of RTT's that were successfully measured
rttMonJitterStatsRTTMax: The maximum of RTT's that were successfully measured
rttMonJitterStatsMinOfPositivesSD: The minimum of absolute values of all positive jitter values from packets sent from source to destination.
rttMonJitterStatsMaxOfPositivesSD: The maximum of absolute values of all positive jitter values from packets sent from source to destination.
rttMonJitterStatsNumOfPositivesSD: The sum of number of all positive jitter values from packets sent from source to destination.
rttMonJitterStatsSumOfPositivesSD: The sum of all positive jitter values from packets sent from source to destination.
rttMonJitterStatsSum2PositivesSDLow: The sum of square of RTT's of all positive jitter values from packets sent from source to destination (low order 32 bits).
rttMonJitterStatsSum2PositivesSDHigh: The sum of square of RTT's of all positive jitter values from packets sent from source to destination (high order 32 bits).
rttMonJitterStatsMinOfNegativesSD: The minimum of all negative jitter values from packets sent from source to destination.
rttMonJitterStatsMaxOfNegativesSD: The maximum of all negative jitter values from packets sent from source to destination.
rttMonJitterStatsNumOfNegativesSD: The sum of number of all negative jitter values from packets sent from source to destination.
rttMonJitterStatsSumOfNegativesSD: The sum of RTT's of all negative jitter values from packets sent from source to destination.
rttMonJitterStatsSum2NegativesSDLow: The sum of square of RTT's of all negative jitter values from packets sent from source to destination (low order 32 bits).
rttMonJitterStatsSum2NegativesSDHigh: The sum of square of RTT's of all negative jitter values from packets sent from source to destination (high order 32 bits).
rttMonJitterStatsMinOfPositivesDS: The minimum of all positive jitter values from packets sent from destination to source.
rttMonJitterStatsMaxOfPositivesDS: The maximum of all positive jitter values from packets sent from destination to source.
rttMonJitterStatsNumOfPositivesDS: The sum of number of all positive jitter values from packets sent from destination to source.
rttMonJitterStatsSumOfPositivesDS: The sum of RTT's of all positive jitter values from packets sent from destination to source.
rttMonJitterStatsSum2PositivesDSLow: The sum of squares of RTT's of all positive jitter values from packets sent from destination to source (low order 32 bits).
rttMonJitterStatsSum2PositivesDSHigh: The sum of squares of RTT's of all positive jitter values from packets sent from destination to source (high order 32 bits).
rttMonJitterStatsMinOfNegativesDS: The minimum of all negative jitter values from packets sent from destination to source.
rttMonJitterStatsMaxOfNegativesDS: The maximum of all negative jitter values from packets sent from destination to source.
rttMonJitterStatsNumOfNegativesDS: The sum of number of all negative jitter values from packets sent from destination to source.
rttMonJitterStatsSumOfNegativesDS: The sum of RTT's of all negative jitter values from packets sent from destination to source.
rttMonJitterStatsSum2NegativesDSLow: The sum of squares of RTT's of all negative jitter values from packets sent from destination to source (low order 32 bits).
rttMonJitterStatsSum2NegativesDSHigh: The sum of squares of RTT's of all negative jitter values from packets sent from destination to source (high order 32 bits).
rttMonJitterStatsPacketLossSD: The number of packets lost when sent from source to destination.
rttMonJitterStatsPacketLossDS: The number of packets lost when sent from destination to source.
rttMonJitterStatsPacketOutOfSequence: The number of packets arrived out of sequence.
rttMonJitterStatsPacketMIA: The number of packets that are lost for which we cannot determine the direction.
rttMonJitterStatsPacketLateArrival: The number of packets that arrived after the timeout.
rttMonJitterStatsError: The number of occasions when a jitter operation could not be initiated because an internal error
rttMonJitterStatsBusies: The number of occasions when a jitter operation could not be initiated because a previous jitter operation has not been completed.
rttMonJitterStatsOWSumSD: The sum of one way times from source to destination (low order 32 bits). The high order 32 bits are stored in rttMonJitterStatsOWSumSDHigh.
rttMonJitterStatsOWSum2SDLow: The sum of squares of one way times from source to destination (low order 32 bits).
rttMonJitterStatsOWSum2SDHigh: The sum of squares of one way times from source to destination (high order 32 bits).
rttMonJitterStatsOWMinSD: The minimum of all one way times from source to destination.
rttMonJitterStatsOWMaxSD: The maximum of all one way times from source to destination.
rttMonJitterStatsOWSumDS: The sum of one way times from destination to source (low order 32 bits). The high order 32 bits are stored in rttMonJitterStatsOWSumDSHigh.
rttMonJitterStatsOWSum2DSLow: The sum of squares of one way times from destination to source (low order 32 bits).
rttMonJitterStatsOWSum2DSHigh: The sum of squares of one way times from destination to source (high order 32 bits).
rttMonJitterStatsOWMinDS: The minimum of all one way times from destination to source.
rttMonJitterStatsOWMaxDS: The maximum of all one way times from destination to source.
rttMonJitterStatsNumOfOW: The number of one way times that are successfully measured.
rttMonJitterStatsOWMinSDNew: The minimum of all one way times from source to destination. Replaces deprecated rttMonJitterStatsOWMinSD.
rttMonJitterStatsOWMaxSDNew: The maximum of all one way times from source to destination. Replaces deprecated rttMonJitterStatsOWMaxSD.
rttMonJitterStatsOWMinDSNew: The minimum of all one way times from destination to source. Replaces deprecated rttMonJitterStatsOWMinDS.
rttMonJitterStatsOWMaxDSNew: The maximum of all one way times from destination to source. Replaces deprecated rttMonJitterStatsOWMaxDS
rttMonJitterStatsMinOfMOS: The minimum of all MOS values for the jitter operations in hundreds. This value will be 0 if - rttMonEchoAdminCodecType of the operation is notApplicable - the operation is not started - the operation is started but failed
rttMonJitterStatsMaxOfMOS: The maximum of all MOS values for the jitter operations in hunderds. This value will be 0 if - rttMonEchoAdminCodecType of the operation is notApplicable - the operation is not started - the operation is started but failed
rttMonJitterStatsMinOfICPIF: The minimum of all ICPIF values for the jitter operations
rttMonJitterStatsMaxOfICPIF: The maximum of all ICPIF values for the jitter operations
rttMonJitterStatsIAJOut: Interarrival Jitter (RFC 1889) at responder
rttMonJitterStatsIAJIn: Interarrival Jitter (RFC 1889) at sender
rttMonJitterStatsAvgJitter: The average of positive and negative jitter values for SD and DS direction.
rttMonJitterStatsAvgJitterSD: The average of positive and negative jitter values in SD direction.
rttMonJitterStatsAvgJitterDS: The average of positive and negative jitter values in DS direction.
rttMonJitterStatsUnSyncRTs: The number of RTT operations that have completed with sender and responder out of sync with NTP. The NTP sync means the total of NTP offset on sender and responder is within configured tolerance level.
rttMonJitterStatsRTTSumHigh: The sum of RTT's that are successfully measured (high order 32 bits). The low order 32 bits are stored in rttMonJitterStatsRTTSum.
rttMonJitterStatsOWSumSDHigh: The sum of one way times from source to destination (high order 32 bits). The low order 32 bits are stored in rttMonJitterStatsOWSumSD.
rttMonJitterStatsOWSumDSHigh: The sum of one way times from destination to source (high order 32 bits). The low order 32 bits are stored in rttMonJitterStatsOWSumDS.
rttMonLpdGrpStatsTable: The Auto SAA L3 MPLS VPN LPD Group Database. The LPD Group statistics table contains summarized performance statistics for the LPD group. LPD Group - The set of 'single probes' which are subset of the 'lspGroup' probe traversing set of paths between two P ...
rttMonLpdGrpStatsEntry: A list of objects which accumulate the results of a set of RTT operations over a 60 minute time period. The LPD group statistics table is a rollover table. When rttMonLpdGrpStatsStartTimeIndex groups exceeds the rttMplsVpnMonTypeLpdStatHours value, the ol ...
rttMonLpdGrpStatsGroupIndex: Uniquely identifies a row in rttMonLpdGrpStatsTable. This is a pseudo-random number which identifies a particular LPD group.
rttMonLpdGrpStatsStartTimeIndex: The time when this row was created. This object is the second index of the rttMonLpdGrpStatsTable. When the number of rttMonLpdGrpStatsStartTimeIndex groups exceeds the rttMplsVpnMonTypeLpdStatHours value, the oldest rttMonLpdGrpStatsStartTimeIndex group ...
rttMonLpdGrpStatsTargetPE: The object is a string that specifies the address of the target PE for this LPD group.
rttMonLpdGrpStatsNumOfPass: This object represents the number of successfull completions of 'single probes' for all the set of paths in the LPD group. Whenever the rttMonLatestRttOperSense value is 'ok' for a particular probe in the LPD Group this object will be incremented. This ob ...
rttMonLpdGrpStatsNumOfFail: This object represents the number of failed operations of 'single probes' for all the set of paths in the LPD group. Whenever the rttMonLatestRttOperSense has a value other than 'ok' or 'timeout' for a particular probe in the LPD Group this object will be ...
rttMonLpdGrpStatsNumOfTimeout: This object represents the number of timed out operations of 'single probes' for all the set of paths in the LPD group. Whenever the rttMonLatestRttOperSense has a value of 'timeout' for a particular probe in the LPD Group this object will be incremented. ...
rttMonLpdGrpStatsAvgRTT: The average RTT across all set of probes in the LPD group. This object will be set to '0' on reset.
rttMonLpdGrpStatsMinRTT: The minimum of RTT's for all set of probes in the LPD group that were successfully measured. This object will be set to '0' on reset.
rttMonLpdGrpStatsMaxRTT: The maximum of RTT's for all set of probes in the LPD group that were successfully measured. This object will be set to '0' on reset.
rttMonLpdGrpStatsMinNumPaths: The minimum number of active paths discovered to the rttMonLpdGrpStatsTargetPE target. This object will be set to '0' on reset.
rttMonLpdGrpStatsMaxNumPaths: The maximum number of active paths discovered to the rttMonLpdGrpStatsTargetPE target. This object will be set to '0' on reset.
rttMonLpdGrpStatsLPDStartTime: The time when the last LSP Path Discovery to the group was attempted. This object will be set to '0' on reset.
rttMonLpdGrpStatsLPDFailOccurred: This object is set to true when the LSP Path Discovery to the target PE i.e. rttMonLpdGrpStatsTargetPE fails, and set to false when the LSP Path Discovery succeeds. When this value changes and rttMplsVpnMonReactLpdNotifyType is set to 'lpdPathDiscovery' o ...
rttMonLpdGrpStatsLPDFailCause: This object identifies the cause of failure for the LSP Path Discovery last attempted. It will be only valid if rttMonLpdGrpStatsLPDFailOccurred is set to true. This object will be set to 'unknown' on reset.
rttMonLpdGrpStatsLPDCompTime: The completion time of the last successfull LSP Path Discovery to the target PE. This object will be set to '0' on reset.
rttMonLpdGrpStatsGroupStatus: This object identifies the LPD Group status. When the LPD Group status changes and rttMplsVpnMonReactLpdNotifyType is set to 'lpdGroupStatus' or 'lpdAll' a rttMonLpdGrpStatusNotification will be generated. When the LPD Group status value is 'unknown' or c ...
rttMonLpdGrpStatsGroupProbeIndex: This object identifies 'lspGroup' probe uniquely created for this particular LPD Group.
rttMonLpdGrpStatsPathIds: A string which holds the list of information to uniquely identify the paths to the target PE. This information is used by the 'single probes' when testing the paths. Following three parameters are needed to uniquely identify a path - lsp-selector (127.x.x ...
rttMonLpdGrpStatsProbeStatus: A string which holds the latest operation return code for all the set of 'single probes' which are part of the LPD group. The return codes will be comma separated and will follow the same sequence of probes as followed in 'rttMonLpdGrpStatsPathIds'. The l ...
rttMonLpdGrpStatsResetTime: This object specifies the time when this statistics row was last reset using the rttMonApplLpdGrpStatsReset object.
rttMonHistoryCollectionTable: The history collection database. The history table contains a point by point rolling history of the most recent RTT operations for each conceptual RTT control row. The rolling history of this information is maintained in a series of 'live(s)', each conta ...
rttMonHistoryCollectionEntry: A list of history objects that are recorded for each RTT operation. The history collection table has four indices. Each described as follows: - The first index correlates its entries to a conceptual RTT control row via the rttMonCtrlAdminIndex object. - ...
rttMonHistoryCollectionLifeIndex: This uniquely defines a life for a conceptual history row. For a particular value of rttMonHistoryCollectionLifeIndex, the agent assigns the first value of 1, the second value of 2, and so on. The sequence keeps incrementing, despite older (lower) values ...
rttMonHistoryCollectionBucketIndex: When the RttMonRttType is 'pathEcho', this uniquely defines a bucket for a given value of rttMonHistoryCollectionLifeIndex. For all other RttMonRttType this value will be the number of operations per a lifetime. Thus, this object increments on each oper ...
rttMonHistoryCollectionSampleIndex: This uniquely defines a row for a given value of rttMonHistoryCollectionBucketIndex. This object represents a hop along a path to the Target. For a particular value of rttMonHistoryCollectionBucketIndex, the agent assigns the first value of 1, the second ...
rttMonHistoryCollectionSampleTime: The time that the RTT operation was initiated.
rttMonHistoryCollectionAddress: When the RttMonRttType is 'echo' or 'pathEcho' this is a string which specifies the address of the target for the this RTT operation. For all other values of RttMonRttType this string will be null. This address will be the address of the hop along the pa ...
rttMonHistoryCollectionCompletionTime: This is the operation completion time of the RTT operation. If the RTT operation fails (rttMonHistoryCollectionSense is any value other than ok), this has a value of 0.
rttMonHistoryCollectionSense: A sense code for the completion status of the RTT operation.
rttMonHistoryCollectionApplSpecificSense: An application specific sense code for the completion status of the last RTT operation. This object will only be valid when the rttMonHistoryCollectionSense object is set to 'applicationSpecific'. Otherwise, this object's value is not valid.
rttMonHistoryCollectionSenseDescription: A sense description for the completion status of the last RTT operation when the rttMonHistoryCollectionSense object is set to 'applicationSpecific'.
--: The compliance statement for new MIB extensions for (1) supporting LSP Path Discovery for Auto SAA L3 MPLS VPN. (2) Group Scheduler Enhancement. ciscoCtrlGroupRev16 is only mandatory for the devices that support LSP Ping over pseudowire. ciscoCtrlGroupRev ...
ciscoStatsGroup: A collection of objects providing accumulated statistical history.
ciscoHistoryGroup: A collection of objects providing point by point history of each RTT operation.
ciscoCtrlGroupRev1: A collection of objects that were added to enhance the functionality of the RTT application.
ciscoCtrlGroupRev2: A collection of objects that were added to enhance the functionality of the RTT application to configure HTTP, DNS and Jitter probes.
ciscoLatestOperGroupRev1: A collection of objects that were added to store the latest operational results for HTTP, DNS and Jitter probes.
ciscoStatsGroupRev1: A collection of objects that were added to enhance the functionality of the RTT application to store 'HTTP' and 'Jitter' probes statistics.
ciscoApplGroupRev2: These objects provide support for configuring responder on a router and also configure authentication information.
ciscoCtrlGroupRev4: A collection of objects that were added to enhance the functionality of the RTT application.
ciscoStatsGroupRev3: A collection of objects that were added to enhance the functionality of the RTT application to store one way 'Jitter' probes statistics.
ciscoCtrlGroupRev6: A collection of objects that were added to enhance the functionality of the RTT application.
ciscoStatsGroupRev4: A collection of objects that were added to enhance the functionality of the RTT application to store MOS and ICPIF for 'Jitter' probe statistics.
ciscoApplGroupRev3: A collection of objects providing the RTT Monitoring Application defaults. This group of information is provided to the agent when the Application starts.
ciscoCtrlGroupRev7: A collection of objects that were added to enhance the scheduling functionality of the RTT application.
ciscoCtrlGroupRev8: A collection of objects that were added to support (1) echo operations support based on MPLS LSP Ping, (2) pathEcho operations support based on MPLS LSP Ping and (3) Auto SAA L3 MPLS VPN enhancement.
ciscoStatsGroupRev5: A collection of objects that are added to report intera-rrival Jitter, average jitter and improve accuracy.
ciscoCtrlGroupRev9: A collection of objects that are added to enhance the jitter probe accuracy.
ciscoCtrlGroupRev10: A collection of objects providing the Administration, Operational, Last Statistical values for the RTT Monitoring Application.
ciscoCtrlGroupRev11: A collection of objects that were added for the reaction configuration of probe.
ciscoCtrlGroupRev12: A collection of objects that were added for the configuration of rtp operation.
ciscoCtrlGroupRev13: A collection of objects that were added for the parameters configuration of mpls based operations.
ciscoStatsGroupRev7: A collection of objects that are added for collecting the statistics for LSP Path Discovery Group.
ciscoApplGroupRev4: This object is added to reset the LSP Path Discovery Stats.
ciscoCtrlGroupRev14: This object is added for group scheduler enhancement
ciscoCtrlGroupRev15: These objects are added for Ethernet ping/jitter operation.
ciscoRttMonObsoleteGroupRev1: A collection of all objects that are obsolete.
ciscoRttMonDeprecatedGroupRev1: A collection of all objects that are deprecated.
ciscoCtrlGroupRev16: These objects are added for LSP Ping Pseudowire operation.
ciscoCtrlGroupRev17: This object is added for IP SLA Auto Measure project.
ciscoCtrlGroupRev18: This object is added for Ethernet ping/jitter operation.
ciscoCtrlGroupRev19: This object is added for Ethernet ping/jitter operation.
ciscoStatsGroupRev8: A collection of objects that were added to store the high order 32 bits of RTT and one way latency statistics for 'jitter' probe.
ciscoCtrlGroupRev20: This object has been added for video operation.
ciscoCtrlGroupRev21: This object has been added to support of DSCP marking, sender DSP reservation, and source interface for path congruence in video operation.
ciscoCtrlGroupRev22: This object has been added to support of emulate source address, emulate source port, emulate target address and emulate target port for path congruence in video operation.

Download IPHost Network Monitor (500 monitors for 30 days, 50 monitors free forever) to start monitoring network devices right now.

MIBs list