CISCO-WIRELESS-EXP-MIB Download
This is the MIB Module for the Cisco Wireless Radio
Point to Point experimental components.
IPHost Network Monitor offer an easy way of SNMP monitoring your Cisco Servers, Routers, Switches, Bridges,
Firewalls, Repeaters.
OID list for CISCO-WIRELESS-EXP-MIB
- cwrRfEntityTable
- This table contains information about the radio frequency resources available for use on the system.
- cwrRfEntityEntry
- This represents one entry in the cwrRfEntityTable. This table is largely a read only table which provides details on the radio frequency resources available on the system. Physically each RF resource may be realized by one antenna and its associated contr ...
- cwrRfEntityIndex
- This object represents the index of this entry in the cwrRfEntityTable.
- cwrRfSwRevision
- This object represents the software revision number of controlling the RF subsystem.
- cwrRfAssemblyPartNumberClass
- This object represents the assembly part number class of the RF subsystem.
- cwrRfAssemblyPartNumberBase
- This object represents the assembly part number base of the RF subsystem.
- cwrRfAssemblyPartNumberVersion
- This object represents the assembly part number version of the RF subsystem.
- cwrRfBoardPartNumberClass
- This object represents the board part number class of the RF subsystem.
- cwrRfBoardPartNumberBase
- This object represents the board part number base of the RF subsystem.
- cwrRfBoardPartNumberVersion
- This object represents the board part number version of the RF subsystem.
- cwrRfBoardRevision
- This object represents the board revision of the RF subsystem.
- cwrRfSerialNumber
- This object represents the serial number of the RF subsystem.
- cwrRfManfDate
- This object represents the manufacturing date of the RF subsystem.
- cwrRfVendorId
- This object represents the Radio frequency device vendor ID.
- cwrRfDuplexorIndex
- This object represents the index into cwrDuplexorTable. This index identifies the Duplexor associated with this RF resource.
- cwrIntFreqEntityTable
- This table contains information about the intermediate frequency subsystem on the radio card.
- cwrIntFreqEntityEntry
- This represents one entry in the cwrIntFreqEntityTable. This table is largely a read only table which provides details on the intermediate frequency subsystem available on the radio card. It is indexed by the ifIndex.
- cwrIfAssemblyPartNumberClass
- This object represents the assembly part number class of the IF subsystem.
- cwrIfAssemblyPartNumberBase
- This object represents the assembly part number base of the IF subsystem.
- cwrIfAssemblyPartNumberVersion
- This object represents the assembly part number version of the IF subsystem.
- cwrIfBoardPartNumberClass
- This object represents the board part number class of the IF subsystem.
- cwrIfBoardPartNumberBase
- This object represents the board part number base of the IF subsystem.
- cwrIfBoardPartNumberVersion
- This object represents the board part number version of the IF subsystem.
- cwrIfBoardRevision
- This object represents the board revision of the IF subsystem.
- cwrIfSerialNumber
- This object represents the serial number of the IF subsystem.
- cwrIfManfDate
- This object represents the manufacturing date of the IF subsystem.
- cwrIfVendorId
- This object represents the IF vendor ID.
- cwrIfSwRevision
- This object represents the IF software revision.
- cwrImageTable
- This table provides facilities to manage the firmware images that the router will use to configure the radio line cards. When images need to be downloaded, the software will search this list starting from the first, for an image whose capabilities match t ...
- cwrImageEntry
- This represents one entry in the cwrImageTable.
- cwrImageIndex
- This represents the one entry in this table. It also represents the search order. When images need to be downloaded to the hardware, the images are searched in the order of this index for an image that matches the hardware capabilities and uses it.
- cwrImageNameUrl
- This object is the name of the image in the Universal Resource Locator (URL) format. This URL will be used to access the image when needed.
- cwrImageState
- This represents the state of the image. image_invalid(1): If the image could not be accessed for any reason. image_valid(2) : Image accessible and available for use.
- cwrImageSize
- This represents the size of the image in bytes.
- cwrImageChipClass
- This represents the class of chips onto which this image may be loaded.
- cwrImageChipType
- This represents the download method to use.
- cwrImageCapability1
- This represents a bitmask. The bit mask identifies the capabilities of this image. See also cwrImageCapability2.
- cwrImageCapability2
- This represents a bitmask. The bit mask identifies the capabilities of this image in addition to cwrImageCapability1.
- cwrImageVersion
- This represents the version number of this image.
- cwrImageTag
- This object is the tag string associated with the image. Normally used to trace the source code used to generate this image.
- cwrImageOp
- This object represents the operation to be performed on the identified image. nop(0) - This value will be returned when this object is read. add(1) - Will add the image URL, as the first entry in the image table. delete(2) - Will delete the specifie ...
- cwrLedTable
- Entity (Light emitting diode) LED information. For each LED on the entity, an entry will exist in this table, describing the location and current status of that LED.
- cwrLedEntry
- An entry in the table, containing the LED information about the entity. The entPhysicalIndex identifies the entity on which the Led's are present.
- cwrLedIndex
- For a given entPhysicalIndex, this index value uniquely identifies an entry in the cwrLedTable.
- cwrLedName
- The label of the LED on the physical entity or a textual description to identify the usage of the LED.
- cwrLedVerticalPosition
- The position of the LED in the entity. It is counted from top to bottom.
- cwrLedHorizontalPosition
- The position of the LED in the entity. It is counted from from left to right.
- cwrLedMode
- This objects specifies the desired mode of LED updates. automatic(1) and latched(2) are settings used by the software to determine how the LED should be updated. The others are for diagnostic purposes. The LED will be turned on or off as specified by the ...
- cwrLedCurrentColor
- Indicates the current color of the LED.
- cwrDuplexorTable
- This table contains information about the Duplexors available for use on the system.
- cwrDuplexorEntry
- This represents one entry in the cwrDuplexorTable. This table provides details on the Duplexors available on the system. It is indexed by the ifIndex and cwrDuplexorIndex.
- cwrDuplexorIndex
- This object represents the index of this entry in the cwrDuplexorTable.
- cwrDuplexorCiscoPartNumber
- This object represents the Cisco part number for this Duplexor.
- cwrDuplexorLoPassbandRange
- This object represents the low frequency range that this Duplexor will pass through without any attenuation. All low frequencies outside this range will be attenuated to a level such that an RF resource that uses this Duplexor will be unable to transmit o ...
- cwrDuplexorHiPassbandRange
- This object represents the high frequency range that this Duplexor will pass through without any attenuation. All high frequencies outside this range will be attenuated to a level such that an RF resource that uses this Duplexor will be unable to transmit ...
- cwrDuplexorReceivePassband
- This object indicates which of the two passbands are being used to receive transmissions. The RF Resource can receive on either of the duplexor passbands. loPassband(1) - The RF Resource is receiving on a frequency within the range identified by cwrDuple ...
- cwrDuplexorCLEICode
- The CLEI code for this Duplexor.
- cwrDuplexorVendorName
- The Vendor Name for this Duplexor.
- cwrDuplexorSerialNumber
- The Serial number of this Duplexor.
- cwrComplianceRadioRFGroup
- Group of objects implemented in the point to point wireless system for managing the Radio Frequency resources on the link.
- cwrComplianceRadioImageGroup
- Group of objects implemented in the point to point wireless system for managing images related to the point-to-point wireless firmware.
- cwrComplianceRadioLEDGroup
- Group of objects implemented in the point to point wireless card to provide information about the LEDs on the card.
- cwrComplianceRadioDuplexorGroup
- Group of objects implemented in the point to point wireless card to provide information about the duplexor's in the system.
Download IPHost Network Monitor (500 monitors for 30 days, 50 monitors free forever) to start monitoring network devices right now.