IMA-MIB Download

imaGroupNumber

The number of IMA groups configured on this system.

imaGroupTable

The IMA Group Configuration table.

imaGroupEntry

An entry in the IMA Group table.

imaGroupIndex

A unique value for the IMA Group.

imaGroupRowStatus

The imaGroupRowStatus object allows create, change, and delete operations on imaGroupTable entries. To create a new conceptual row (or instance) of the imaGroupTable, imaGroupRowStatus must be set to 'createAndWait' or 'createAndGo'. If settable, a succes ...

imaGroupIfIndex

This object identifies the logical interface number ('ifIndex') assigned to this IMA group, and is used to identify corresponding rows in the Interfaces MIB. Note that re-initialization of the management agent may cause a client's 'imaGroupIfIndex' to cha ...

imaGroupNeState

The current operational state of the near-end IMA Group State Machine.

imaGroupFeState

The current operational state of the far-end IMA Group State Machine.

imaGroupFailureStatus

The current failure status of the IMA group (the reason why the GTSM is in the down state).

imaGroupSymmetry

Symmetry of the IMA group.

imaGroupMinNumTxLinks

Minimum number of transmit links required to be Active for the IMA group to be in the Operational state.

imaGroupMinNumRxLinks

Minimum number of receive links required to be Active for the IMA group to be in the Operational state.

imaGroupNeTxClkMode

Transmit clocking mode used by the near-end IMA group.

imaGroupFeTxClkMode

Transmit clocking mode used by the far-end IMA group.

imaGroupTxTimingRefLink

The ifIndex of the transmit timing reference link to be used by the near-end for IMA data cell clock recovery from the ATM layer. The distinguished value of zero may be used if no link has been configured in the IMA group, or if the transmit timing refer ...

imaGroupRxTimingRefLink

The ifIndex of the receive timing reference link to be used by near-end for IMA data cell clock recovery toward the ATM layer. The distinguished value of zero may be used if no link has been configured in the IMA group, or if the receive timing reference ...

imaGroupLastChange

The time-of-day the IMA group last changed operational state (i.e., value of imaGroupNeState changed).

imaGroupTxImaId

The IMA ID currently in use by the near-end IMA function.

imaGroupRxImaId

The IMA ID currently in use by the far-end IMA function.

imaGroupTxFrameLength

The frame length to be used by the IMA group in the transmit direction. Can only be set when the IMA group is startup.

imaGroupRxFrameLength

Value of IMA frame length as received from remote IMA function.

imaGroupDiffDelayMax

The maximum number of milliseconds of differential delay among the links that will be tolerated on this interface.

imaGroupLeastDelayLink

The ifIndex of the link configured in the IMA group which has the smallest link propagation delay. The distinguished value of zero may be used if no link has been configured in the IMA group, or if the link with the smallest link propagation delay has no ...

imaGroupDiffDelayMaxObs

The latest maximum differential delay observed (in milliseconds) between the links having the least and most link propagation delay, among the receive links that are currently configured in the IMA group.

imaGroupAlphaValue

This indicates the 'alpha' value used to specify the number of consecutive invalid ICP cells to be detected before moving to the IMA Hunt state from the IMA Sync state.

imaGroupBetaValue

This indicates the 'beta' value used to specify the number of consecutive errored ICP cells to be detected before moving to the IMA Hunt state from the IMA Sync state.

imaGroupGammaValue

This indicates the 'gamma' value used to specify the number of consecutive valid ICP cells to be detected before moving to the IMA Sync state from the IMA PreSync state.

imaGroupRunningSecs

The amount of time (in seconds) since this IMA group has been in the Operational state.

imaGroupUnavailSecs

Count of one second intervals where the IMA Group Traffic State Machine is Down.

imaGroupNeNumFailures

The number of times a near-end group failure (Config-Aborted, Insufficient-Links) has been reported since power-up or reboot.

imaGroupFeNumFailures

The number of times a far-end group failure (Config-Aborted-FE, Insufficient-Links-FE, Blocked-FE) has been reported since power-up or reboot. This is an optional attribute.

imaGroupTxAvailCellRate

The current cell rate (truncated value in cells per second) provided by this IMA group in the transmit direction, considering all the transmit links in the Active state.

imaGroupRxAvailCellRate

The current cell rate (truncated value in cells per second) provided by this IMA group in the receive direction, considering all the receive links in the Active state.

imaGroupNumTxCfgLinks

The number of links that are configured to transmit in this IMA group. This attribute overwrites the value of the imaGroupNumRxActLinks attribute when the IMA group is configured in the Symmetrical Configuration group symmetry mode.

imaGroupNumRxCfgLinks

The number of links that are configured to receive in this IMA group. This attribute is overwritten by the value of the imaGroupNumTxActLinks attribute when the IMA group is configured in the Symmetrical Configuration group symmetry mode.

imaGroupNumTxActLinks

The number of links which are configured to transmit and are currently Active in this IMA group.

imaGroupNumRxActLinks

The number of links which are configured to receive and are currently Active in this IMA group.

imaGroupTestLinkIfIndex

This object is used to designate an interface as the test link for use in the Test Pattern Procedure. The distinguished value of zero specifies that the implementation may choose the Test Link, in which case, the implementation may also choose the value ...

imaGroupTestPattern

The value of this object is used to specify the Tx Test Pattern in an IMA group loopback operation. A value in the range 0 to 255 designates a specific pattern. The distinguished value of -1 specifies that the implementation may choose the value. In th ...

imaGroupTestProcStatus

This object is used to enable or disable the Test Pattern Procedure, and to note whether at least one link failed the test. The test is started by setting operating(2) status. If any link should fail the test, the IMA will set the status to linkFail(3). ...

imaGroupValidIntervals

The number of previous 15 minute intervals for which valid data was collected. The value will be 96 unless the IMA group table entry was created within the last 24 hours, in which case the value will be the number of complete 15 minute intervals since th ...

imaGroupInvalidIntervals

The number of intervals for which no valid data is available. This attribute is only mandatory when the IMA Group Interval Statistics and/or IMA Group Total Statistics objects are implemented.

imaGroupTimeElapsed

The number of seconds that have elapsed since the beginning of the current measurement period. This attribute is only mandatory when the IMA Group Current Statistics are implemented.

imaGroupTxOamLabelValue

IMA OAM Label value transmitted by the NE IMA unit.

imaGroupRxOamLabelValue

IMA OAM Label value transmitted by the FE IMA unit. The value 0 likely means that the IMA unit has not received an OAM Label from the FE IMA unit at this time.

imaGroupMappingTable

A table mapping the 'ifIndex' values of 'imaGroupIfIndex' to the 'imaGroupIndex' values of the corresponding IMA group.

imaGroupMappingEntry

Each row describes one ifIndex to imaGroupIndex mapping.

imaGroupMappingIndex

The imaGroupIndex of the IMA Group which implements the specified interface.

imaLinkTable

The IMA group Link Status and Configuration table.

imaLinkEntry

An entry in the IMA Group Link table.

imaLinkIfIndex

This corresponds to the 'ifIndex' of the MIB-II interface on which this link is established. This object also corresponds to the logical number ('ifIndex') assigned to this IMA link.

imaLinkRowStatus

The imaLinkRowStatus object allows create, change, and delete operations on imaLinkTable entries. To create a new conceptual row (or instance) of the imaLinkTable, imaLinkRowStatus must be set to 'createAndWait' or 'createAndGo'. A successful set of the i ...

imaLinkGroupIndex

The value which identifies the IMA group (imaGroupIndex) of which this link is a member.

imaLinkNeTxState

The current state of the near-end transmit link.

imaLinkNeRxState

The current state of the near-end receive link.

imaLinkFeTxState

The current state of the far-end transmit link as reported via ICP cells.

imaLinkFeRxState

The current state of the far-end receive link as reported via ICP cells.

imaLinkNeRxFailureStatus

The current link failure status of the near-end receive link.

imaLinkFeRxFailureStatus

The current link failure status of the far-end receive link as reported via ICP cells.

imaLinkTxLid

The outgoing LID used currently on the link by the local end. This value has meaning only if the link belongs to an IMA group.

imaLinkRxLid

The incoming LID used currently on the link by the remote end as reported via ICP cells. This value has meaning only if the link belongs to an IMA group.

imaLinkRelDelay

The latest measured delay on this link relative to the link, in the same IMA group, with the least delay.

imaLinkImaViolations

ICP violations: count of errored, invalid or missing ICP cells, except during SES-IMA or UAS-IMA conditions.

imaLinkOifAnomalies

The number of OIF anomalies, except during SES-IMA or UAS-IMA conditions, at the near-end. This is an optional attribute.

imaLinkNeSevErroredSecs

Count of one second intervals containing >= 30% of the ICP cells counted as IV-IMAs, or one or more link defects (e.g., LOS, OOF/LOF, AIS, or LCD), LIF defects, or LODS defects, except during UAS-IMA condition.

imaLinkFeSevErroredSecs

Count of one second intervals containing one or more RDI-IMA defects, except during UAS-IMA-FE condition.

imaLinkNeUnavailSecs

Count of unavailable seconds at near-end: unavailability begins at the onset of 10 contiguous SES-IMA and ends at the onset of 10 contiguous seconds with no SES-IMA.

imaLinkFeUnavailSecs

Count of unavailable seconds at far-end: unavailability begins at the onset of 10 contiguous SES-IMA-FE and ends at the onset of 10 contiguous seconds with no SES-IMA-FE.

imaLinkNeTxUnusableSecs

Tx Unusable seconds: count of Tx Unusable seconds at the near-end Tx LSM.

imaLinkNeRxUnusableSecs

Rx Unusable seconds: count of Rx Unusable seconds at the near-end Rx LSM.

imaLinkFeTxUnusableSecs

Tx Unusable seconds at far-end: count of seconds with Tx Unusable indications from the far-end Tx LSM.

imaLinkFeRxUnusableSecs

Rx Unusable seconds at far-end: count of seconds with Rx Unusable indications from the far-end Rx LSM.

imaLinkNeTxNumFailures

The number of times a near-end transmit failure alarm condition has been entered on this link (i.e., some form of implementation specific transmit fault).

imaLinkNeRxNumFailures

The number of times a near-end receive failure alarm condition has been entered on this link (i.e., LIF, LODS, RFI-IMA, Mis-Connected or some form of implementation specific receive fault).

imaLinkFeTxNumFailures

The number of times a far-end transmit failure alarm condition has been entered on this link (i.e., Tx-Unusable-FE). This is an optional attribute.

imaLinkFeRxNumFailures

The number of times a far-end receive failure alarm condition has been entered on this link (i.e., Rx-Unusable-FE). This is an optional attribute.

imaLinkTxStuffs

Count of stuff events inserted in the transmit direction. This is an optional attribute.

imaLinkRxStuffs

Count of stuff events detected in the receive direction. This is an optional attribute.

imaLinkRxTestPattern

This object identifies the test pattern received in the ICP Cell (octet 17) on the link during the IMA Test Pattern Procedure. This value may then be compared to the transmitted test pattern.

imaLinkTestProcStatus

This value indicates the current state of the Test Pattern Procedure. If the value is disabled(1), the test is not running. A value of operating(2) means the test is running and no error has been found on this interface. A value of linkFail(3) means an ...

imaLinkValidIntervals

The number of previous 15 minute intervals for which valid data was collected. The value will be 96 unless the IMA group table entry was created within the last 24 hours, in which case the value will be the number of complete 15 minute intervals since th ...

imaLinkInvalidIntervals

The number of intervals for which no valid data is available. This attribute is only mandatory when the IMA Link Interval Statistics and/or IMA Link Total Statistics objects are implemented.

imaLinkTimeElapsed

The number of seconds that have elapsed since the beginning of the current measurement period. This attribute is only mandatory when the IMA Link Current Statistics are implemented.

imaAlarmStatus

Status of the IMA alarm.

imaAlarmType

The Type of IMA alarm declared or cleared. The value of ImaAlarmType identifies the type of alarm according to the definitions in the IMA specification.

imaGroupCurrentTable

The IMA Group Current table.

imaGroupCurrentEntry

An entry in the IMA Group Current table.

imaGroupCurrentUnavailSecs

Count of one second intervals where the IMA Group Traffic State Machine is Down in the current 15 minutes interval.

imaGroupCurrentNeNumFailures

The number of times a near-end group failure (Config-Aborted, Insufficient-Links) has been reported in the current 15 minutes interval.

imaGroupCurrentFeNumFailures

The number of times a far-end group failure (Config-Aborted-FE, Insufficient-Links-FE, Blocked-FE) has been reported in the current 15 minutes interval. This is an optional attribute.

imaGroupIntervalTable

The IMA Group Interval table.

imaGroupIntervalEntry

An entry in the IMA Group Interval table.

imaGroupIntervalNumber

A number between 1 and 96, where 1 is the most recently completed 15 minute interval and 96 is the least recently completed 15 minutes interval (assuming that all 96 intervals are valid).

imaGroupIntervalUnavailSecs

Count of one second intervals where the IMA Group Traffic State Machine is Down in one of the previous 96, individual 15 minute, intervals.

imaGroupIntervalNeNumFailures

The number of times a near-end group failure (Config-Aborted, Insufficient-Links) has been reported in one of the previous 96, individual 15 minute, intervals.

imaGroupIntervalFeNumFailures

The number of times a far-end group failure (Config-Aborted-FE, Insufficient-Links-FE, Blocked-FE) has been reported in one of the previous 96, individual 15 minute, intervals. This is an optional attribute.

imaGroupTotalTable

The IMA Group Total table.

imaGroupTotalEntry

An entry in the IMA Group Total table.

imaGroupTotalUnavailSecs

Count of one second intervals where the IMA Group Traffic State Machine is Down in the previous 24 hour interval. Invalid 15 minute intervals count as 0.

imaGroupTotalNeNumFailures

The number of times a near-end group failure (Config-Aborted, Insufficient-Links) has been reported in the previous 24 hour interval. Invalid 15 minute intervals count as 0.

imaGroupTotalFeNumFailures

The number of times a far-end group failure (Config-Aborted-FE, Insufficient-Links-FE, Blocked-FE) has been reported in the previous 24 hour interval. Invalid 15 minute intervals count as 0. This is an optional attribute.

imaLinkCurrentTable

The IMA Link Current table.

imaLinkCurrentEntry

An entry in the IMA Link Current table.

imaLinkCurrentImaViolations

ICP violations: count of errored, invalid or missing ICP cells, except during SES-IMA or UAS-IMA conditions, in the current 15 minute interval.

imaLinkCurrentOifAnomalies

The number of OIF anomalies, except during SES-IMA or UAS-IMA conditions, at the near-end in the current 15 minute interval. This is an optional attribute.

imaLinkCurrentNeSevErroredSecs

Count of one second intervals containing >= 30% of the ICP cells counted as IV-IMAs, or one or more link defects (e.g., LOS, OOF/LOF, AIS, or LCD), LIF defects, or LODS defects, except during UAS-IMA condition, in the current 15 minute interval.

imaLinkCurrentFeSevErroredSecs

Count of one second intervals containing one or more RDI-IMA defects, except during UAS-IMA-FE condition, in the current 15 minute interval.

imaLinkCurrentNeUnavailSecs

Count of unavailable seconds at near-end in the current 15 minute interval: unavailability begins at the onset of 10 contiguous SES-IMA and ends at the onset of 10 contiguous seconds with no SES-IMA.

imaLinkCurrentFeUnavailSecs

Count of unavailable seconds at far-end in the current 15 minute interval: unavailability begins at the onset of 10 contiguous SES-IMA-FE and ends at the onset of 10 contiguous seconds with no SES-IMA-FE.

imaLinkCurrentNeTxUnusableSecs

Tx Unusable seconds: count of Unusable seconds at the near-end Tx LSM in the current 15 minute interval.

imaLinkCurrentNeRxUnusableSecs

Rx Unusable seconds: count of Unusable seconds at the near-end Rx LSM in the current 15 minute interval.

imaLinkCurrentFeTxUnusableSecs

Tx Unusable seconds at far-end: count of seconds with Tx Unusable indications from the far-end Tx LSM in the current 15 minute interval.

imaLinkCurrentFeRxUnusableSecs

Rx Unusable seconds at far-end: count of seconds with Rx Unusable indications from the far-end Rx LSM in the current 15 minute interval.

imaLinkCurrentNeTxNumFailures

The number of times a near-end transmit failure alarm condition has been entered on this link (i.e., some form of implementation specific transmit fault) in the current 15 minute interval.

imaLinkCurrentNeRxNumFailures

The number of times a near-end receive failure alarm condition has been entered on this link (i.e., LIF, LODS, RFI-IMA, Mis-Connected, or some form of implementation specific receive fault) in the current 15 minute interval.

imaLinkCurrentFeTxNumFailures

The number of times a far-end transmit failure alarm condition has been entered on this link (i.e., Tx-Unusable-FE) in the current 15 minute interval. This is an optional attribute.

imaLinkCurrentFeRxNumFailures

The number of times a far-end receive failure alarm condition has been entered on this link (i.e., Rx-Unusable-FE) in the current 15 minute interval. This is an optional attribute.

imaLinkCurrentTxStuffs

Count of stuff events inserted in the transmit direction in the current 15 minute interval. This is an optional attribute.

imaLinkCurrentRxStuffs

Count of stuff events detected in the receive direction in the current 15 minute interval. This is an optional attribute.

imaLinkIntervalTable

The IMA Link Interval table.

imaLinkIntervalEntry

An entry in the IMA Link Interval table.

imaLinkIntervalNumber

A number between 1 and 96, where 1 is the most recently completed 15 minute interval and 96 is the least recently completed 15 minutes interval (assuming that all 96 intervals are valid).

imaLinkIntervalImaViolations

ICP violations: count of errored, invalid or missing ICP cells, except during SES-IMA or UAS-IMA conditions, in one of the previous 96, individual 15 minute, intervals.

imaLinkIntervalOifAnomalies

The number of OIF anomalies, except during SES-IMA or UAS-IMA conditions, at the near-end in one of the previous 96, individual 15 minute, intervals. This is an optional attribute.

imaLinkIntervalNeSevErroredSecs

Count of one second intervals containing >= 30% of the ICP cells counted as IV-IMAs, or one or more link defects (e.g., LOS, OOF/LOF, AIS, or LCD), LIF defects, or LODS defects, except during UAS-IMA condition, in one of the previous 96, individual 15 min ...

imaLinkIntervalFeSevErroredSecs

Count of one second intervals containing one or more RDI-IMA defects, except during UAS-IMA-FE condition, in one of the previous 96, individual 15 minute, intervals.

imaLinkIntervalNeUnavailSecs

Count of unavailable seconds at near-end in one of the previous 96, individual 15 minute, intervals: unavailability begins at the onset of 10 contiguous SES-IMA and ends at the onset of 10 contiguous seconds with no SES-IMA.

imaLinkIntervalFeUnavailSecs

Count of unavailable seconds at far-end in one of the previous 96, individual 15 minute, intervals: unavailability begins at the onset of 10 contiguous SES-IMA-FE and ends at the onset of 10 contiguous seconds with no SES-IMA-FE.

imaLinkIntervalNeTxUnusableSecs

Tx Unusable seconds: count of Unusable seconds at the near-end Tx LSM in one of the previous 96, individual 15 minute, intervals.

imaLinkIntervalNeRxUnusableSecs

Rx Unusable seconds: count of Unusable seconds at the near-end Rx LSM in one of the previous 96, individual 15 minute, intervals.

imaLinkIntervalFeTxUnusableSecs

Tx Unusable seconds at far-end: count of seconds with Tx Unusable indications from the far-end Tx LSM in one of the previous 96, individual 15 minute, intervals.

imaLinkIntervalFeRxUnusableSecs

Rx Unusable seconds at far-end: count of seconds with Rx Unusable indications from the far-end Rx LSM in one of the previous 96, individual 15 minute, intervals.

imaLinkIntervalNeTxNumFailures

The number of times a near-end transmit failure alarm condition has been entered on this link (i.e., some form of implementation specific transmit fault) in one of the previous 96, individual 15 minute, intervals.

imaLinkIntervalNeRxNumFailures

The number of times a near-end receive failure alarm condition has been entered on this link (i.e., LIF, LODS, RFI-IMA, Mis-Connected, or some form of implementation specific receive fault) in one of the previous 96, individual 15 minute, intervals.

imaLinkIntervalFeTxNumFailures

The number of times a far-end transmit failure alarm condition has been entered on this link (i.e., Tx-Unusable-FE) in one of the previous 96, individual 15 minute, intervals. This is an optional attribute.

imaLinkIntervalFeRxNumFailures

The number of times a far-end receive failure alarm condition has been entered on this link (i.e., Rx-Unusable-FE) in one of the previous 96, individual 15 minute, intervals. This is an optional attribute.

imaLinkIntervalTxStuffs

Count of stuff events inserted in the transmit direction in one of the previous 96, individual 15 minute, intervals. This is an optional attribute.

imaLinkIntervalRxStuffs

Count of stuff events detected in the receive direction in one of the previous 96, individual 15 minute, intervals. This is an optional attribute.

imaLinkTotalTable

The IMA Link Total table.

imaLinkTotalEntry

An entry in the IMA Link Total table.

imaLinkTotalImaViolations

ICP violations: count of errored, invalid or missing ICP cells, except during SES-IMA or UAS-IMA conditions, in the previous 24 hour interval. Invalid 15 minute intervals count as 0.

imaLinkTotalOifAnomalies

The number of OIF anomalies, except during SES-IMA or UAS-IMA conditions, at the near-end in the previous 24 hour interval. Invalid 15 minute intervals count as 0. This is an optional attribute.

imaLinkTotalNeSevErroredSecs

Count of one second intervals containing >= 30% of the ICP cells counted as IV-IMAs, or one or more link defects (e.g., LOS, OOF/LOF, AIS, or LCD), LIF defects, or LODS defects, except during UAS-IMA condition, in the previous 24 hour interval. Invalid 1 ...

imaLinkTotalFeSevErroredSecs

Count of one second intervals containing one or more RDI-IMA defects, except during UAS-IMA-FE condition, in the previous 24 hour interval. Invalid 15 minute intervals count as 0.

imaLinkTotalNeUnavailSecs

Count of unavailable seconds at near-end in the previous 24 hour interval: unavailability begins at the onset of 10 contiguous SES-IMA and ends at the onset of 10 contiguous seconds with no SES-IMA. Invalid 15 minute intervals count as 0.

imaLinkTotalFeUnavailSecs

Count of unavailable seconds at far-end in the previous 24 hour interval: unavailability begins at the onset of 10 contiguous SES-IMA-FE and ends at the onset of 10 contiguous seconds with no SES-IMA-FE. Invalid 15 minute intervals count as 0.

imaLinkTotalNeTxUnusableSecs

Tx Unusable seconds: count of Unusable seconds at the near-end Tx LSM in the previous 24 hour interval. Invalid 15 minute intervals count as 0.

imaLinkTotalNeRxUnusableSecs

Rx Unusable seconds: count of Unusable seconds at the near-end Rx LSM in the previous 24 hour interval. Invalid 15 minute intervals count as 0.

imaLinkTotalFeTxUnusableSecs

Tx Unusable seconds at far-end: count of seconds with Tx Unusable indications from the far-end Tx LSM in the previous 24 hour interval. Invalid 15 minute intervals count as 0.

imaLinkTotalFeRxUnusableSecs

Rx Unusable seconds at far-end: count of seconds with Rx Unusable indications from the far-end Rx LSM in the previous 24 hour interval. Invalid 15 minute intervals count as 0.

imaLinkTotalNeTxNumFailures

The number of times a near-end transmit failure alarm condition has been entered on this link (i.e., some form of implementation specific transmit fault) in the previous 24 hour interval. Invalid 15 minute intervals count as 0.

imaLinkTotalNeRxNumFailures

The number of times a near-end receive failure alarm condition has been entered on this link (i.e., LIF, LODS, RFI-IMA, Mis-Connected, or some form of implementation specific receive fault) in the previous 24 hour interval. Invalid 15 minute intervals cou ...

imaLinkTotalFeTxNumFailures

The number of times a far-end transmit failure alarm condition has been entered on this link (i.e., Tx-Unusable-FE) in the previous 24 hour interval. Invalid 15 minute intervals count as 0. This is an optional attribute.

imaLinkTotalFeRxNumFailures

The number of times a far-end receive failure alarm condition has been entered on this link (i.e., Rx-Unusable-FE) in the previous 24 hour interval. Invalid 15 minute intervals count as 0. This is an optional attribute.

imaLinkTotalTxStuffs

Count of stuff events inserted in the transmit direction in the previous 24 hour interval. Invalid 15 minute intervals count as 0. This is an optional attribute.

imaLinkTotalRxStuffs

Count of stuff events detected in the receive direction in the previous 24 hour interval. Invalid 15 minute intervals count as 0. This is an optional attribute.

imaGroupGroup

A set of objects providing configuration and status information for an IMA group definition.

imaLinkGroup

A set of objects providing status information for an IMA link.

imaGroupMappingTableGroup

A table mapping the 'ifIndex' values of 'imaGroupIfIndex' to the 'imaGroupIndex' values of the corresponding IMA group.

imaTestPatternGroup

Objects in the imaGroupTable and imaLinkTable which control and report on the Test Pattern Procedure. These objects must be implemented if the IMA Test Pattern Procedure is supported.

imaAlarmGroup

Objects used in the imaFailureAlarm notification.

imaGroupIntervalGroup

Objects containing interval statistics for an IMA group.

imaLinkIntervalGroup

Objects containing interval statistics for an IMA link.