JUNIPER-IF-MIB Download

ifJnxTable

A list of Juniper's extension to the interface entries. The number of entries is given by the value of ifNumber. This table contains additional objects for the interface table.

ifJnxEntry

An entry containing additional management information applicable to a particular interface.

ifIn1SecRate

The number of bits per second (bps), delivered by this (sub-)layer to its next higher (sub-)layer.

ifIn1SecOctets

The number of octets per second (Bps, Bytes per second), delivered by this (sub-)layer to its next higher (sub-)layer.

ifIn1SecPkts

The number of packets per second (pps), delivered by this (sub-)layer to its next higher (sub-)layer.

ifOut1SecRate

The number of bits per second (bps), delivered by this (sub-)layer to its next lower (sub-)layer.

ifOut1SecOctets

The number of octets per second (Bps, Bytes per second), delivered by this (sub-)layer to its next lower (sub-)layer.

ifOut1SecPkts

The number of packets per second (pps), delivered by this (sub-)layer to its next lower (sub-)layer.

ifHCIn1SecRate

The number of bits per second (bps), delivered by this (sub-)layer to its next higher (sub-)layer. This object is a 64 bit version of ifIn1SecRate.

ifHCOut1SecRate

The number of bits per second (bps), delivered by this (sub-)layer to its next lower (sub-)layer. This object is a 64 bit version of ifOut1SecRate.

ifJnxInErrors

Errors: The sum of the incoming frame aborts and FCS errors.

ifJnxInFrameErrors

Framing Errors: The number of input packets which were misaligned.

ifJnxInQDrops

Drops: The number of packets dropped by the input queue of the I/O Manager ASIC.

ifJnxInRunts

Runts: Frames received that are smaller than the runt threshold.

ifJnxInGiants

Giants: Frames received that are larger than the giant threshold.

ifJnxInDiscards

Policed Discards: Frames that the incoming packet match code discarded because they were not recognized or of interest.

ifJnxInHslCrcErrors

HS Link CRC Errors: The number of CRC errors on the high-speed links between the ASICs responsible for handling the router interfaces while receiving packets.

ifJnxInHslFifoOverFlows

HS link FIFO overflows: The number of FIFO overflows on the high-speed links between the ASICs responsible for handling the router interfaces.

ifJnxInL3Incompletes

L3 incompletes: The number of incoming packets that fail Layer 3 sanity checks of the header.

ifJnxInL2ChanErrors

L2 channel errors: the number of incoming packets for which the sofware could not find a valid logical interface.

ifJnxInL2MismatchTimeouts

L2 mismatch timeouts: The count of malformed or short packets that cause the incoming packet handler to discard the frame as unreadable.

ifJnxInInvalidVCs

Invalid VCs: Number of cells that arrived for a nonexistent virtual circuit.

ifJnxInFifoErrors

FIFO errors: The number of FIFO errors in the receive direction as reported by the ASIC on the PIC.

ifJnxBucketDrops

Bucket drops: Drops due to traffic load exceeding the interface transmit/receive leaky bucket configuration.

ifJnxSramErrors

SRAM errors: This counter increments when a hardware error has occurred in the SRAM on the PIC.

ifJnxOutErrors

Errors: The sum of the outgoing frame aborts and FCS errors.

ifJnxCollisions

Collisions: The number of output collisions detected on this interface.

ifJnxCarrierTrans

Carrier transitions: The number of times the interface saw the carrier signal transition.

ifJnxOutQDrops

Drops: The number of packets dropped by the output queue of the I/O Manager ASIC.

ifJnxOutAgedErrors

Aged packets: The number of packets that remained in shared packet SDRAM for so long that the system automatically purged them.

ifJnxOutFifoErrors

FIFO errors: The number of FIFO errors in the transmit direction as reported by the ASIC on the PIC.

ifJnxOutHslFifoUnderFlows

HS link FIFO underflows: The number of FIFO underflows on the high-speed links between the ASICs responsible for handling the router interfaces.

ifJnxOutHslCrcErrors

HS Link CRC Errors: The number of CRC errors on the high-speed links between the ASICs responsible for handling the router interfaces while transmitting packets.

ifChassisTable

A list of Juniper's extension to the interface entries. The number of entries is given by the value of ifNumber. This table contains additional objects for the interface table to facilitate the identification of interfaces and its mapping into the Chassis ...

ifChassisEntry

An entry containing additional management information applicable to a particular interface.

ifChassisFpc

The number of the FPC card on which the interface is located in the chassis. It is the chassis slot in which the FPC card is installed for the specified interface. Although the number is labeled from 0 and up in the chassis, the return value for this obj ...

ifChassisPic

The number of the PIC card on which the interface is located in the chassis. It is the PIC location on the FPC card for the specified interface. Although the number is labeled from 0 and up in the chassis, the return value for this object always starts f ...

ifChassisPort

The number of the port on the PIC card on which the interface is located in the chassis. It is the port number on the PIC card for the specified interface. Although the number is labeled from 0 and up in the chassis, the return value for this object alwa ...

ifChassisChannel

The channel identifier for the specified interface if and only if it is part of a channelized interface. Although the channel is numbered from 0 and up in the interface naming, the return value for this object always starts from 1 according to Network Man ...

ifChassisLogicalUnit

The logical unit number of the specified interface. It is the logical part of the interface that is configured on the physical or channel part if any. Although the logical unit number is numbered from 0 and up in the interface naming, the return value for ...

ifChassisPicIndex

The index or indices for the Chassis MIB tables. This is the instance index which keys into the jnxContentsTable in Chassis MIB. For example, it could return an octet string of '8.1.2.0' - meaning a PIC ('8', first digit) at FPC slot 0 ('1-1', second digi ...