ibm-ibmlanex Download

ibmLeServerXMonLecsInstances

The number of LECS instances currently created on this agent.

ibmLeServerXMonLesInstances

The number of LES instances currently created on this agent.

ibmLeServerXMonBusInstances

The number of BUS instances currently created on this agent.

ibmLeServerXLecsMonTable

This table provides monitoring of LECS instances.

ibmLeServerXLecsMonEntry

Entries of ibmLeServerXLecsMonTable.

ibmLeServerXLecsMonIndex

The index used to identify this LECS instance on this agent. This variable has the same value as the lecsConfIndex used to identify this instance in the LECS MIB.

ibmLeServerXLecsUsedConnections

The number of virtual connections currently in use by this LECS instance.

ibmLeServerXLesMonTable

This table provides monitoring of LES instances.

ibmLeServerXLesMonEntry

Entries of ibmLeServerXLesMonTable.

ibmLeServerXLesMonIndex

The index used to identify this LES instance on this agent. This variable has the same value as the lesConfIndex used to identify this instance in the LES MIB.

ibmLeServerXLesMonUsedConnections

The number of virtual connections currently in use by this LES instance.

ibmLeServerXLesMonLesLecInstances

The number of clients currently served by this LES instance. This is the number of entries in the lesLecTable which have successfully joined this LES instance.

ibmLeServerXBusMonTable

This table provides monitoring of BUS instances.

ibmLeServerXBusMonEntry

Entries of ibmLeServerXBusMonTable.

ibmLeServerXBusMonIndex

The index used to identify this BUS instance on this agent. This variable has the same value as the busConfIndex used to identify this instance in the BUS MIB.

ibmLeServerXBusMonUsedConnections

The number of virtual connections currently in use by this BUS instance.

ibmLeServerXBusMonBusLecInstances

The number of clients currently served by this BUS instance. This is the number of entries in the busLecTable.

ibmLeServerXLesConfigTable

This table provides extension for LES configuration.

ibmLeServerXLesConfigEntry

Entries of ibmLeServerXLesConfigTable.

ibmLeServerXLesMinLecID

The minimum number on the LEC ID range in use by by this LES instance. The default value is 1 the first possible LEC ID.

ibmLeServerXLesMaxLecID

The maximum number on the LEC ID range in use by by this LES instance. The default value is 65279 the last possible LEC ID.

ibmSEPortStatisticsTable

This table contains statistics about LAN Emulation Control Frame Statistics for Super ELAN Bridge ports.

ibmSEPortStatisticsEntry

A list of LE Control Frame statistical information for each SEB port

ibmSEBridgeId

The identifier of the Super ELAN Bridge which this LAN Emulation Client has joined.

ibmSEPortNum

The bridge port number associated with this Super ELAN Bridge LAN Emulation Client. This variable directly corresponds, is equal to, the dot1dBasePort variable in rfc1493.

ibmSEPortArpRequestsIn

The number of LE ARP Requests received by the SEB port.

ibmSEPortArpRequestsOut

The number of bridged LE ARP Requests transmitted by the SEB port.

ibmSEArpRequestsErrors

The number of received LE ARP Requests that were not bridged by the SEB port

ibmSEPortArpRequestsDroppedPortBlocked

The number of outgoing ARP Requests that were dropped by the SEB port because the port was in the blocking state.

ibmSEPortArpRequestsFiltered

The number of received LE ARP Requests discarded by the SEB port because the target MAC address in the LE ARP Request was filtered by the bridge.

ibmSEPortArpRepliesIn

The number of LE ARP Responses received by the SEB port.

ibmSEPortArpRepliesOut

The number of bridged LE ARP Responses transmitted by the SEB port.

ibmSEPortArpRepliesErrors

The number of received LE ARP Responses that were dropped by the SEB port because the SEB port originating the corresponding LE ARP Request could not be determined.

ibmSEPortNarpRequestsIn

The number of LE NARP Requests received by the SEB port.

ibmSEPortNarpRequestsOut

The number of bridged LE NARP Requests transmitted by the SEB port.

ibmSEPortNarpRequestsDroppedPortBlocked

The number of bridged LE NARP Requests that were dropped by the SEB port because the port was in the blocking state.

ibmSEPortFlushRequestsIn

The number of LE Flush Requests received by the SEB port.

ibmSEPortFlushRequestsOut

The number of bridged LE Flush Requests transmitted by the SEB port.

ibmSEPortFlushRepliesIn

The number of LE Flush Responses received by the SEB port.

ibmSEPortFlushRepliesOut

The number of bridged LE Flush Responses transmitted by the SEB port.

ibmSEPortFlushRequestErrors

The number of bridged LE Flush Request Errors for this SEB port.

ibmSEPortFlushRepliesErrors

The number of bridged LE Flush Replies Errors for this SEB port.

ibmSEPortLeCtrlFramesIn

The total number of LE Control frames received by the SEB port.

ibmSEPortLeCtrlFramesOut

The total number of LE Control frames transmitted by the SEB port.

ibmSEPortLeCtrlFramesDiscSrcPortNotFwrd

The total number of LE Control frames discarded because the SEB source port is not forwarding.

ibmSEPortLeCtrlFramesDiscDestPortNotFwrd

The total number of LE Control frames discarded because the SEB destination port is not forwarding.

ibmSEBridgeConfigTable

A table that contains the Super ELAN Bridge (SEB) Configuration.

ibmSEBridgeConfigEntry

The configuration information for each Super ELAN Bridge instance

ibmSEAtmIfNumber

The ATM interface number the Super ELAN (SE) bridging function is associated with. This number is used to determine the NETWORK ID. A SE Bridge (SEB) may span ATM adapters but they have to be on the same network, as specified by the Network ID. The specif ...

ibmSEEnabled

When enabled(1) the SE Bridge (SEB) will bridge frames to the ports defined in its bridging domain. When disabled(2) the SEB will not bridge frames.

ibmSEName

This is a user provided name to associate with the SEB. The SEB name is independent of the ELANs names of the constituent ELANs of the SEB. No default, name must be specified.

ibmSEFrameSize

Indicates the maximum SuperElan frame size. All ELANs in a single SEB must be set to the same maximum frame size. Valid Values 1516, 4544, 9234, 18190 Default for Ethernet 1516, the Default for Token Ring is 4544 Since ibmSEType defaults to Token Ring the ...

ibmSEMacCacheAge

The number of seconds a learned MAC address remains in the data frame forwarding cache without revalidation.

ibmSERDCacheAge

The number of seconds a learned route descriptor remains in the data frame forwarding cache without revalidation.

ibmSEPriority

The SuperElan Bridge spanning tree priority. A lower value will increase the likelihood of a SuperElan bridge becoming the root. This value is appended to the SuperElan Spanning Tree MAC Address to form a SuperElan Bridge ID.

ibmSEMaxAge

The age at which the current Spanning Tree configuration is deemed too old. A value to small may cause the spanning tree to unnecessarily reconfigure. A value to large will increase the time it takes for the spanning tree to form once an outage is detecte ...

ibmSEBridgeHelloTime

The interval of time in seconds between the generation of Spanning Tree configuration messages generate by the root. Lower values increase the spanning tree robustness, but increase network traffic overhead. Higher values decrease network control traffic ...

ibmSEBridgeForwardDelay

The delay in seconds that the SEB waits before transitioning to the next port state. The forward delay should be large enough to allow all Super ELAN bridges in the SuperELAN to disable ports in the new topology while the new spanning tree is being set up ...

ibmSEBridgeAddress

The Bridge MAC Address identifies the SuperELAN for the purposes of maintaining the SEB Spanning tree. If no value is configured, the SEB interface with the lowest MAC address will be used. This 6 octet Spanning Tree MAC Address is added to the value of t ...

ibmSEType

This object indicates the type of SEB. sebEN(1) specifies a type of Ethernet, sebTR(2) specific's a type of Token Ring.

ibmSEConfigRowStatus

This object is used to create or delete entries (rows) in the SuperElan Bridge Configuration Table.

ibmSEPortConfigTable

A table that contains SuperELAN Bridge Port Configuration.

ibmSEPortConfigEntry

The configuration information for each SuperELAN Bridge Port

ibmSEPortIfNumber

The interface number associated with this port.

ibmSEPortElanName

The ELAN Name in which the SuperElan Bridge LEC participates. If the ELAN Name matches that of a LES/BUS on the same node, a SEB-LEC interface is automatically added to the configuration, and the SEB-LEC parameters needed to join the ELAN are read from th ...

ibmSEPortRemoteElan

This object indicates whether or not the Super ELAN LE Services (LES/BUS) for the ELAN specified by ibmSEPortElanName are local to the same node as the port or not. If false(2) the LE Services are local, if true(1) the LE Services are remote (not residen ...

ibmSEPortEnabled

When enabled(1) the SuperELAN will bridge frames through this SEB port. When disabled(2) the SuperELAN will not bridge frames through this port.

ibmSEPortPriority

This value influences which port is used when two or more ports are connected to the same network segment. This situation may cause a routing loop and a the priority provides a port selection method. A lower value represents a higher priority. ?Is Define ...

ibmSEPortRowStatus

This object is used to create or delete entries (rows) in the SuperElan Bridge Port Configuration Table.

ibmSEBridgeTable

A table that contains bridge information for the SEB.

ibmSEBridgeEntry

Each entry (row) contains additional SEB pertaining to a specific SEB instance.

ibmSENumPorts

The number of ports defined for this SEB. This number can be used to determine the next available port number for row creation in any of the SEB Port Tables. Of course the next available index is determined by adding one to the number of ports defined.

ibmSEProtocolSpecification

The protocol type used for this SEB. Currently only Transparent Bridging with Source Route Awareness (tbSra(2)) is the only defined protocol type for SEB's.

ibmSETimeSinceTopologyChange

The time (in hundredths of a second) since the last time a topology change was detected by the bridge entity.

ibmSETopChanges

The total number of topology changes detected by this bridge since the management entity was last reset or initialized.

ibmSEDesignatedRoot

The bridge identifier of the root of the spanning tree as determined by the Spanning Tree Protocol as executed by this node. This value is used as the Root Identifier parameter in all Configuration Bridge PDUs originated by this node.

ibmSERootCost

The cost of the path to the root as seen from this bridge.

ibmSERootPort

The port number of the port which offers the lowest cost path from this bridge to the root bridge.

ibmSEBridgeMaxAge

The maximum age of Spanning Tree Protocol information learned from the network on any port before it is discarded, in units of hundredths of a second. This is the actual value that this bridge is currently using.

ibmSEHelloTime

The amount of time between the transmission of Configuration bridge PDUs by this node on any port when it is the root of the spanning tree or trying to become so, in units of hundredths of a second. This is the actual value that this bridge is currently u ...

ibmSEHoldTime

This time value determines the interval length during which no more than two Configuration bridge PDUs shall be transmitted by this node, in units of hundredths of a second.

ibmSEForwardDelay

This time value, measured in units of hundredths of a second, controls how fast a port changes its spanning state when moving towards the Forwarding state. The value determines how long the port stays in each of the Listening and Learning states, which p ...

ibmSEMacLearnedEntryDiscards

The total number of Mac Forwarding Database entries, which have been or would have been learnt, but have been discarded due to a lack of space to store them in the Forwarding Database. If this counter is increasing, it indicates that the Forwarding Datab ...

ibmSERDLearnedEntryDiscards

The total number of Route Descriptor Forwarding Database entries, which have been or would have been learnt, but have been discarded due to a lack of space to store them in the Forwarding Database. If this counter is increasing, it indicates that the For ...

ibmSEStpPortTable

A table that contains port-specific information and Spanning Tree Protocol information for each SEB Port.

ibmSEStpPortEntry

A list of SEB information maintained for each SEB port.

ibmSEStpPortState

The port's current state as defined by application of the Spanning Tree Protocol. This state controls what action a port takes on reception of a frame. If the bridge has detected a port that is malfunctioning it will place that port into the broken(6) s ...

ibmSEStpPortDesignatedRoot

The unique Bridge Identifier of the Bridge recorded as the Root in the Configuration BPDUs transmitted by the Designated Bridge for the segment to which the port is attached.

ibmSEStpPortDesignatedCost

The path cost of the Designated Port of the segment connected to this port. This value is compared to the Root Path Cost field in received bridge PDUs.

ibmSEStpPortDesignatedBridge

The Bridge Identifier of the bridge which this port considers to be the Designated Bridge for this port's segment.

ibmSEStpPortDesignatedPort

The Port Identifier of the port on the Designated Bridge for this port's segment.

ibmSEStpPortForwardTransitions

The number of times this port has transitioned from the Learning state to the Forwarding state.

ibmSEPortMaxInfo

The maximum size of the INFO (non-MAC) field that this port will receive or transmit.

ibmSEPortDataStatisticsTable

This table contains statistics about LAN Emulation Data Frame Statistics for Super ELAN Bridge ports.

ibmSEPortDataStatisticsEntry

A list of LE Data Frame statistical information for each SEB port

ibmSEPortInFrames

The number of frames that have been received by this port from its segment. Note that a frame received on the interface corresponding to this port is only counted by this object if and only if it is for a protocol being processed by the local bridging fun ...

ibmSEPortOutFrames

The number of frames that have been transmitted by this port to its segment. Note that a frame transmitted on the interface corresponding to this port is only counted by this object if and only if it is for a protocol being processed by the local bridgin ...

ibmSEPortRoutedInFrames

Frames received on this port that were routed, rather than, or in addition to, bridged.

ibmSEPortBpduFrames

Count of SE BPDU Frames

ibmSEPortInDiscards

Count of valid frames received which were discarded (i.e., filtered) by the Forwarding Process.

ibmSEPortDropSrcAddrFilters

Frames dropped due to Source Address filtering

ibmSEPortDropDestAddrFilters

Frames dropped due to destination address filtering. These are frames to destinations on the same LAN that they arrived on, or otherwise filtered by the filtering database of the bridge.

ibmSEPortDropProtocolFilters

Frames dropped due to user filtering of particular protocol identifiers.

ibmSEPortDropSrcNotFwds

Frames received on this port when it was not in forwarding state (mostly in learning state).

ibmSEPortDropDestNotFwds

Frames not sent because output port not in forwarding state. Don't know which port they tag on yet.

ibmSEPortDropInputOverflows

Frames dropped due to input queue overflow.

ibmSEPortDropBpduOverflows

BPDU's dropped due to BPDU input queue overflow.

ibmSEPortDropSrOverflows

Source Route Frames dropped due to SR input queue overflow.

ibmSEPortRecNoBuffFailures

Receive frames discarded due to no buffer available.

ibmSEPortTransmitFailures

Frame Count of transmit failures.

ibmSEPortToBigFailures

Count of frames to big to sent on this port.

ibmSEPortLanIdFailures

Count of frames discarded due to mismatch in the LAN ID.

ibmSEPortStpLanIdFailures

Count of frames discarded due to duplicate LAN ID or spanning tree error.

ibmBbcmConfigNextId

The next available index in the ibmBbcmConfigTable. The value of this object can be used as the index by the network manager to create an entry in the table. This object is no longer required since the ibmBbcmConfigIndex is now specified as the superElanI ...

ibmBbcmConfigTable

This table contains configuration values for the Bridging Broadcast Manager (BBCM).

ibmBbcmConfigEntry

Each entry of the table represents a configured instance of the BBCM.

ibmBbcmConfigIndex

A value which uniquely identifies a conceptual row of the BBCM Configuration Table. Since BBCM is a bridge based function, each row of this table identifies a unique bridge instance.

ibmBbcmName

This is the name associated with the bridge instance. It is either the Super Elan Bridge name or the name assigned to the base bridge.

ibmBbcmConfigRowStatus

This object is used to create or delete entries in the ibmBbcmConfigTable.

ibmBbcmProtocolConfigTable

Each entry of the table represents a configured instance of a specific protocol for a particular BBCM instance.

ibmBbcmProtocolConfigEntry

Each entry of the table represents a configuration information for a specific protocol supported by a specific BBCM.

ibmBbcmProtocolType

BBCM Protocols Supported. For ease in implementation the enumerated types for ibmBbcmProtocolType and ibmBbcmStatProtocolType are equivalent. Note: 1 is reserved so ibmBbcmStatProtocolType of 1 can be all. This allows enumeration values to match between i ...

ibmBbcmProtocolOperStatus

The current BBCM Status Note for this implementation other is defined only to be consistent with standard LE server MIBs, it has no meaning for the definition.

ibmBbcmProtocolAdminStatus

The desired state of the BBCM as prescribed by the operator. The actions of the agent will, if at all possible, eventually result in the desired state being reflected in the ibmBbcmProtocolOperStatus.

ibmBbcmProtocolCacheAge

The number of minutes a protocol is cached by BBCM before being added due to inactivity.

ibmBbcmStatTable

This table contains activity statistics on a BBCM basis.

ibmBbcmStatEntry

Each entry of the tables represents a BBCM protocol instance.

ibmBbcmStatProtocolType

BBCM Protocols Supported. For ease in implementation the enumerated types for ibmBbcmProtocolType and ibmBbcmStatProtocolType are equivalent. When the protocol type is 1 (allprotocols) the response contains the total count for all protocols supported by t ...

ibmBbcmStatInReceives

Number of packets processed by BBCM for this protocol

ibmBbcmStatInOctets

Number of Octets processed by BBCM for this protocol. This count is of all octets seen, including control information like headers.

ibmBbcmStatOutManaged

Number of packets transformed by BBCM from broadcast to unicast for this protocol.

ibmBbcmStatOutManagedOctets

Number of Octets transformed by BBCM from broadcast to unicast for this protocol. This count is of all octets seen, including control information like headers.

ibmBbcmStatOutNotManaged

The number of packets seen by BBCM that were left as they were originally broadcast.

ibmBbcmStatOutNotManagedOctets

The number of octets seen by BBCM that were left as they were originally broadcast. This count is of all octets seen, including control information like headers.

ibmBbcmStatOutFiltered

Number of Packets Filtered by BBCM.

ibmBbcmStatOutFilteredOctets

Number of Octets Filtered by BBCM.

ibmVlanConfIndexNextID

This is the next available Vlan Index for this agent. If should be used when creating rows in the Vlan tables indexed by ibmVlanConfIndex.

ibmVlanTopologyChange

This is the time stamp at which time the last VLAN Topology Change occurred. This object can be used to monitor the change status of the VLANs controlled by this agent. A change is defined whenever a VLAN has been added, deleted or changes configuration. ...

ibmVlanMaxPortMap

This is the maximum number of octets this agent supports for representing ports in the the Port Map objects which use the textual convention IbmVlanPortMap.

ibmVlanMaxUDSWMaskFilter

This is the maximum number of octets this agent supports for ibmVlanUDSWMask or ibmVlanUDSWFilter. The Mask and Filter must contain the same number of octets.

ibmVlanConfTable

The layout of the VLAN MIB tables relies on common information and VLAN type specific information. The ibmVlanConfTable is the base table. Columns are added to this table depending on the VLAN type, for example ibmVlanIPConfTable is for IP VLANs, ibmVlanI ...

ibmVlanConfEntry

Each entry of the ibmVlanConfTable provides configuration information pertaining to a specific instance of a VLAN.

ibmVlanConfIndex

An index assigned by the agent which uniquely identifies an instance of a VLAN. This objects value is NOT guaranteed to be the same value across agent restarts.

ibmVlanConfBridgeId

The identifier of the Base Bridge or Super ELAN Bridge which this VLAN is defined as an additional filter for.

ibmVlanConfType

The type of VLAN.

ibmVlanConfAgingTimer

The amount of time (in minutes) an auto-detect port will remain in the forwarding domain of the VLAN in the absence of traffic from that VLAN. A value of zero means forever.

ibmVlanConfForwardingPortMap

Defines which ports are in forwarding state for this VLAN. The VLAN port is in forwarding state if one of the following is true: The port has been statically included by setting the corresponding port in ibmVlanIncludedPortMap. The port is not excluded, c ...

ibmVlanConfIncludedPortMap

Each of the bits in the port map represents a bridge port and defines which ports are automatically and permanently included from the forwarding domain of the VLAN. A value of 1 for the port means it is included. A value of 0 means the port has to be disc ...

ibmVlanConfExcludedPortMap

Each of the bits in the port map represents a bridge port and defines which ports are automatically and permanently excluded from the forwarding domain of the VLAN. A value of 1 for the port means it is excluded from the VLAN even if traffic for this VLAN ...

ibmVlanConfName

A node unique user defined name for the VLAN. This name must be unique across all bridge instances at that node (agent).

ibmVlanConfRowStatus

This object is used to create or delete entries (rows) in the VLAN Configuration Table.

ibmVlanIpConfTable

The IBM VLAN Configuration Table provides the definitions required to configure an IBM IP or IP Multicast Protocol Virtual LAN (PVLAN) This table defines the filters for the IP or IP Multicast PVLAN Entries in this table must be provided when the correspo ...

ibmVlanIpConfEntry

Each entry of the ibmVlanIpConfTable provides configuration information pertaining to a specific instance of an IP or IP Multicast PVLAN.

ibmVlanIpNetworkAddr

The IP or IP Multicast address of the local forwarding component used to route or bridge traffic for this VLAN. No default value. A default value must be specified when creating an IP or IP Multicast VLAN.

ibmVlanIpNetworkMask

The IP address mask used to 'AND' against the IP address in a received IP frame. The result of the 'AND' operation is compared to the value given in the ibmVlanIPNetworkAddr in order to determine if the frame belongs to the VLAN and should be forwarded. T ...

ibmVlanIpCutThruFromHere

Specifies whether IP cut through communications originating from this subnet are enabled.

ibmVlanIpCutThruToHere

Specifies whether IP cut through communications destined for this subnet are enabled.

ibmVlanIpxConfTable

The IBM IPX VLAN Configuration Table provides the definitions required to configure an IBM IPX Protocol Virtual LAN (PVLAN). This table defines the filters for the IPX PVLAN. Entries in this table must be provided when the corresponding row of the ibmVlan ...

ibmVlanIpxConfEntry

Each entry of the ibmVlanIpxConfTable provides configuration information pertaining to a specific instance of an IPX PVLAN.

ibmVlanIpxNetworkAddr

This is the VLANs IPX Network Address. No Default Value, one must be specified when creating an IPX PVLAN in the ibmVlanConfTable.

ibmVlanUDSWConfTable

This table defines a 'sliding window' mechanism for the definition of 'policy' or 'user' defined VLANs. The mechanism is based on a set of mask and filter fields that when compared to traffic data permit forwarding decisions for the packet to be made for ...

ibmVlanUDSWOffsetType

This object specifies the base location in the traffic frame where the ibmVlanUDSWOffset will be used to start the comparison with the ibmVlanUDSWFilter value to determine if this frame is in a Sliding Window Vlan. Two starting location modes are predefin ...

ibmVlanUDSWOffset

This object determines the starting location in the traffic frame that will be used in the comparison with the ibmVlanUDSWFilter value to determine if this frame is in a Sliding Window Vlan. It is specified as a value offset indicating the number of octet ...

ibmVlanUDSWMask

This object determines the size and bit pattern that is compared to the traffic frame at the location specified by the offset type and starting at the offset location in order to produce a result. The size of the mask must be equivalent to the size of the ...

ibmVlanUDSWFilter

This object determines the size and bit pattern that is compared to the result after the mask being applied to the traffic frame at the location specified by the offset type and starting at the offset location. The size of the filter must be equivalent to ...

ibmVlanMacConfTable

The IBM MAC VLAN Configuration Table provides the definitions required to configure an IBM MAC Virtual LAN (VLAN). This table defines the filters for the IBM MAC VLAN. Entries in this table must be provided when the corresponding row of the ibmVlanConfTab ...

ibmVlanMacConfEntry

Each entry of the ibmVlanMacConfTable provides configuration information pertaining to a specific instance of a MAC VLAN.

ibmVlanMacAddrIndex

The MAC address index being used as a filter for this MAC address VLAN.

ibmVlanMacAddresses

A string of Source MAC addresses being used as a filter for this MAC address VLAN.

ibmVlanMacAddrConfRowStatus

This object is used to create or delete entries (rows) in the MAC Address Configuration Table.

ibmVlanStatusTable

The IBM VLAN Status Table provides the administration and statistics for an IBM Virtual LAN (VLAN).

ibmVlanStatusEntry

Each entry in the ibmVlanStatusTable augments a specific instance of an IP VLAN.

ibmVlanOperStatus

Current state of the VLAN

ibmVlanAdminStatus

Desired state of the VLAN. This change becomes immediate on completion of the set operation and does not require system restart.

ibmVlanProcessedPackets

The number of Broadcast/Multicast packets received by this VLAN.

ibmVlanDiscardedPackets

The number of Broadcast packets discarded by this VLAN because the source VLAN was excluded on the port.

ibmVlanDiscPktsMac

The object contains the Source MAC address from the last packet that was discarded because the source VLAN was excluded on the port. This will aid in finding the station that is being excluded. This object is defined as read-write so that a manager can cl ...

ibmVlanIpStatusTable

The IBM IP VLAN Status Table provides the administration and statistics for an IBM IP Protocol Virtual LAN (PVLAN).

ibmVlanIpStatusEntry

Each entry in the ibmVlanIpStatusTable augments a specific instance of an IP PVLAN.

ibmVlanIpCutThruFromPkts

The number of Broadcast/Multicast packets cutThru from this VLAN.

ibmVlanIpCutThruToPkts

The number of Broadcast/Multicast packets received to this VLAN.

ibmVlanIpCutThruFromDiscPkts

The number of Broadcast/Multicast packets discarded because cutThru from this VLAN was disabled.

ibmVlanIpCutThruToDiscPkts

The number of Broadcast/Multicast packets discarded before it is forwarded because cutThru to this VLAN was disabled.