Cisco Cable QOS monitor Cmts Enforce Rule First Peak Time

1.3.6.1.4.1.9.9.341.1.1.1.1.16

The user can define two peak times and the remaining hours will be treated as offpeak and the monitoring will happen for these offpeak hours if ccqmCmtsEnfRuleOffPeakDuration and ccqmCmtsEnfRuleOffPeakAvgRate are defined. The first peak parameters are defined using ccqmCmtsEnfRuleFirstPeakTime, ccqmCmtsEnfRuleFirstDuration and ccqmCmtsEnfRuleFirstAvgRate objects while the second peak parameters can be defined using ccqmCmtsEnfRuleSecondPeakTime, ccqmCmtsEnfRuleSecondDuration and ccqmCmtsEnfRuleSecondAvgRate. Each peak time has an associated average rate and a duration for which that average rate holds good. Defining the first peak is mandatory, though defining the second peak and offpeak is not mandatory. Both these peak times should be defined such that they don't overlap and the first peak time has to be an earlier time than the second peak time. User would need to use 24 hour clock for setting this. This object cannot be changed when ccqmCmtsEnfRuleRowStatus is active(1).