CISCO-CABLE-QOS-MONITOR-MIB Download

ccqmCmtsEnforceRuleTable

This table contains the attributes of the QoS enforce rules present on the CMTS. These enforce rules define the criteria for identifying subscribers who over consume resources. This could be as simple as bytes transmitted over the last monitoring duration ...

ccqmCmtsEnforceRuleEntry

A set of attributes of a enforce rule on the CMTS. One entry exists for each QoS enforce rule. It is indexed by ccqmCmtsEnfRuleName as each enforce rule is associated with a unique name. The user can define the legacy/basic monitoring as: Suppose, the dur ...

ccqmCmtsEnfRuleName

The name of the enforce rule.

ccqmCmtsEnfRuleRegQoS

This object represents a pointer to the object describing the quality of service attributes associated with the registered service of the subscriber. For DOCSIS1.0 (DOCSIS1.0+) subscribers it is the index in the docsIfQosProfileTable. If no associated ent ...

ccqmCmtsEnfRuleEnfQos

This object represents a pointer to the object describing the quality of service attributes associated with the registered service of the subscriber. For DOCSIS1.0 (and DOCSIS1.0+) subscribers it is the index in the docsIfQosProfileTable. If no associated ...

ccqmCmtsEnfRuleMonDuration

This object represents the duration for which subscribers would be monitored to determine if they were over consuming resources. This object can be set only when ccqmCmtsEnfRuleMonType is set to basic(1). If peak-offpeak monitoring is enabled i.e., ccqmCm ...

ccqmCmtsEnfRuleSampleRate

This object represents the interval at which a decision would be made to check if the subscriber over consumed his resources based on the subscriber usage in the past duration. Since the duration can range between 10 minutes to 30 days hence the range of ...

ccqmCmtsEnfRulePenaltyPeriod

This object represents the period in which the enforced QoS parameter set will be in effect from the time of detection. When the time as defined by this object expires, the registered QoS parameter set would be restored. This object cannot be changed when ...

ccqmCmtsEnfRuleByteCount

The number of kbytes that the subscriber can transmit in the monitoring duration as indicated by ccqmCmtsEnfRuleMonDuration before being flagged as over consuming. This object cannot be changed when ccqmCmtsEnfRuleRowStatus is active(1).

ccqmCmtsEnfRuleDirection

Specifies if the average rate specified by ccqmCmtsEnfRuleAvgRate is for the upstream/downstream direction. Setting to bidirection(3) is not permitted. This object cannot be changed when ccqmCmtsEnfRuleRowStatus is active(1).

ccqmCmtsEnfRuleAutoEnforce

If the ccqmCmtsEnfRuleAutoEnforce is TRUE, the enforced QoS parameter set as specified by ccqmCmtsEnfRuleEnfQos for DOCSIS1.0 (and DOCSIS1.0+) modems or ccqmCmtsEnfRuleEnfSerClassName for DOCSIS1.1 and DOCSIS2.0 modems will be automatically enforced when ...

ccqmCmtsEnfRuleRowStatus

The object controls and reflects the status of rows in this table. All row status values are supported. The status of the row needs to be changed from active(1) to notInService(2) in cases when any of the enforce rule objects need to be changed. If there ...

ccqmCmtsEnfRuleAvgRate

This object defines the rate at which the subscriber is allowed to consume for the monitoring duration. So, if this rate is defined to be 2kbits/sec and the monitoring duration is set to be 120 minutes, then every sample period the subscribers consumption ...

ccqmCmtsEnfRuleDocsVer

This defines the DOCSIS version of the modems that the enforce rule would be applicable to. If it is set to docsis10(2) then only ccqmCmtsEnfRuleRegQoS and ccqmCmtsEnfRuleEnfQoS can be set and if previously ccqmCmtsEnfRuleRegSerClassName and ccqmCmtsEnfRu ...

ccqmCmtsEnfRuleRegSerClassName

This object represents a pointer to the object describing the quality of service attributes associated with the registered service of the subscriber. For DOCSIS1.1 and DOCSIS2.0 subscribers it is same as docsQosParamSetServiceClassName in docsQosParamSetT ...

ccqmCmtsEnfRuleEnfSerClassName

This object represents a pointer to the object describing the quality of service attributes associated with the registered service of the subscriber. For DOCSIS1.1 and DOCSIS2.0 subscribers it is same as docsQosParamSetServiceClassName in docsQosParamSetT ...

ccqmCmtsEnfRuleMonType

This object defines the monitoring type. If it is set to basic(1), then ccqmCmtsEnfRuleMonDuration and ccqmCmtsEnfRuleAvgRate are used to define the monitoring and if the peak-offpeak objects were set before, they will all be reset to 0 and if the user se ...

ccqmCmtsEnfRuleFirstPeakTime

The user can define two peak times and the remaining hours will be treated as offpeak and the monitoring will happen for these offpeak hours if ccqmCmtsEnfRuleOffPeakDuration and ccqmCmtsEnfRuleOffPeakAvgRate are defined. The first peak parameters are def ...

ccqmCmtsEnfRuleFirstDuration

This object defines the duration for which the first peak time would be applicable. When ccqmCmtsEnfRuleMonDuration is polled during first peak, it will return this value. The ccqmCmtsEnfRuleFirstPeakTime has to be defined before defining this object else ...

ccqmCmtsEnfRuleFirstAvgRate

This object defines the rate at which the subscriber is allowed to consume during the first peak duration. The ccqmCmtsEnfRuleFirstDuration has to be defined before defining this value. This object cannot be changed when ccqmCmtsEnfRuleRowStatus is active ...

ccqmCmtsEnfRuleSecondPeakTime

The user can define two peak times in a day. The second peak is defined using ccqmCmtsEnfRuleSecondPeakTime, ccqmCmtsEnfRuleSecondDuration and ccqmCmtsEnfRuleSecondThreshold objects while the first peak is defined using ccqmCmtsEnfRuleFirstPeakTime, ccqmC ...

ccqmCmtsEnfRuleSecondDuration

This object defines the duration for which the second peak time would be applicable. When ccqmCmtsEnfRuleMonDuration is polled during second peak, it will return this value. It can be set to 0 to indicate that the second peak monitoring no longer needs to ...

ccqmCmtsEnfRuleSecondAvgRate

This object defines the rate at which the subscriber is allowed to consume during the second peak duration. The ccqmCmtsEnfRuleSecondDuration has to be defined before defining this value. This object cannot be changed when ccqmCmtsEnfRuleRowStatus is acti ...

ccqmCmtsEnfRuleOffPeakDuration

This object defines the monitoring-duration that would be applicable for the offpeak times of the day. The off peak times are the times during the day when none of the first peak and second peak times are defined. If this object is set, when ccqmCmtsEnfRu ...

ccqmCmtsEnfRuleOffPeakAvgRate

This object defines the rate at which the subscriber is allowed to consume during the off-peak duration. The ccqmCmtsEnfRuleOffPeakDuration has to be defined before defining this value. This object cannot be changed when ccqmCmtsEnfRuleRowStatus is active ...

ccqmEnfRuleViolateTable

This table contains information of the subscribers who violated their enforce rule over the monitoring duration. In the sliding window concept used, the monitoring duration is the size of the window. This window slides by an amount that is equal to the sa ...

ccqmEnfRuleViolateEntry

A set of attributes of a subscriber who violated his enforce rule in the monitoring period. An entry in this table exists for each subscriber who over-consumed resources based on his configured QoS parameter set. However those subscribers who have an enfo ...

ccqmEnfRuleViolateID

An index assigned to the service flow by the CMTS. This represents an internal service flow ID.

ccqmEnfRuleViolateMacAddr

MAC address of this subscriber. If the subscriber has multiple MAC addresses, this is the MAC address associated with the Cable interface.

ccqmEnfRuleViolateRuleName

A pointer to the enforce rule associated with this subscriber. It provides for referencing the enforce rule to determine the QoS monitoring parameters. This is same as ccqmCmtsEnfRuleName for the corresponding enforce rule in ccqmCmtsEnforceRuleTable.

ccqmEnfRuleViolateByteCount

The total kbytes consumed by the subscriber in the monitoring duration as specified in the corresponding enforce rule object ccqmCmtsEnfRuleMonDuration. If the monitoring is restarted due to change in enforce rule or any other circumstance this count will ...

ccqmEnfRuleViolateLastDetectTime

The time at which the subscriber was found to have violated his enforce rule and the time from which the enforced QoS parameter set, if any, was in effect.

ccqmEnfRuleViolatePenaltyExpTime

The time when the original QoS parameter set will be restored for this violating subscriber. If there was no enforced QoS parameter set configured for this subscriber this object returns 0.

ccqmCmtsIfBwUtilTable

This table contains the attributes which define the bandwidth utilization thresholds for the upstream and downstream interfaces and when the load on these interfaces exceeds the upper threshold, the monitoring of the associated modems service flows starts ...

ccqmCmtsIfBwUtilEntry

A set of attributes to provide additional level of control for monitoring modems. It is indexed by the ifIndex of upstream/downstream interface, thus, only docsCableDownstreamInterface(128) and docsCableUpstreamInterface(129) are allowed to be configured.

ccqmCmtsIfBwUtilUpThreshold

This object defines the upper threshold for the interface bandwidth utilization and when interface bandwidth utilization exceeds this threshold, monitoring of the appropriate modem's service flow will start if there is an asociated enforce-rule present. T ...

ccqmCmtsIfBwUtilLoThreshold

This object defines the lower threshold for the interface bandwidth utilization and when interface bandwidth utilization drops below this threshold, the monitoring of the appropriate modem's service flow will stop. This object can't be set to a value high ...

ccqmCmtsIfBwUtilRowStatus

The object controls and reflects the status of rows in this table. create-and-wait is not supported. The objects can be changed even when the row status is active(1).

ccqmEnfRuleViolateNotifEnable

An indication of whether the ccqmEnfRuleViolateNotification is enabled or disabled.

ccqmEnfRuleGroup

Group of objects implemented in CMTS providing enforce rule and QoS monitoring information.

ccqmEnfRuleViolateGroup

Group of objects implemented in CMTS providing information of enforce rule violations.

ccqmEnfRuleGroupRev1

Group of objects implemented in CMTS providing enforce rule and QoS monitoring information.

ccqmCmtsRuleIfBwUtilGroup

Group of objects implemented in CMTS providing information of interface utilization thresholds.