cpqDaPhyDrvErrDesc
Compaq Drive Array Physical Drive Error Description
1.3.6.1.4.1.232.3.2.5.2.1.15
The index used to display an error associated with a physical drive. This number refers to an entry in a list of error strings enumerating the possible physical drive errors associated with a particular physical disk drive. The valid values are: DriveFailure (1) The Management Station should display the following string: 'Drive Failure'. CommFailure(2) The Management Station should display the following string: 'Communication Failure'. DriveIOError(3) The Management Station should display the following string: 'Drive I/O Error'. SCSICommError(4) The Management Station should display the following string: 'SCSI Communication Error'. CompaqUpgradeRequired(5) The Management Station should display the following string: 'Compaq EISA Configuration Utility or OS upgrade required'. DriveWriteProtected(6) The Management Station should display the following string: 'Drive Write Protected - Check Drive Jumpers'. InvalidRequest(7) The Management Station should display the following string: 'Invalid Request'. SCSIMessageError(8) The Management Station should display the following string: 'SCSI Message Error'. ControllerFailure(9) The Management Station should display the following string: 'Controller Failure'. InternalExternalConflict(10) The Management Station should display the following string: 'Internal/External Conflict on Port 1'. InternalDriveFailure(11) The Management Station should display the following string: 'Internal Drive Failure'. SCSIErrorOutOfRange(12) The Management Station should display the following string: 'SCSI Error, Sense Code = %xh' where %x is the value of the cpqDaPhyDrvSenseCode object. This index will only be provided if the specified object exceeds the valid range. CAMErrorOutOfRange(13) The Management Station should display the following string: 'CAM Error, CAM status =%xh' where %x is the value of the cpqDaPhyDrvCamStatus object. This index will only be provided if the specified object exceeds the valid range. ErrorTypeOutOfRange(14) The Management Station should display the following string: 'Error type =%xh' where %x is the value of the cpqDaPhyDrvErrType object. This index will only be provided if the specified object exceeds the valid range.
Back to CPQIDA MIB page.
IPHost Network monitor uses SNMP for monitoring health and availability of devices and applications in your network. You can send a SNMP Set to any remote device to monitor a specific SNMP object (CPU, Memory, Disk, Server Temperature, RAID failures, IO statistics, connection counts, error and much more).
