rfc1461 Download

mioxPleTable

This table contains information relative to an interface to an X.25 Packet Level Entity (PLE).

mioxPleEntry

These objects manage the encapsulation of other protocols within X.25.

mioxPleMaxCircuits

The maximum number of X.25 circuits that can be open at one time for this interface. A value of zero indicates the interface will not allow any additional circuits (as it may soon be shutdown). A value of 2147483647 allows an unlimited number of circuits ...

mioxPleRefusedConnections

The number of X.25 calls from a remote systems to this system that were cleared by this system. The interface instance should identify the X.25 interface the call came in on.

mioxPleEnAddrToX121LkupFlrs

The number of times a translation from an Encapsulated Address to an X.121 address failed to find a corresponding X.121 address. Encapsulated addresses can be looked up in the mioxPeerTable or translated via an algorithm as for the DDN. Addresses that a ...

mioxPleLastFailedEnAddr

The last Encapsulated address that failed to find a corresponding X.121 address and caused mioxPleEnAddrToX121LkupFlrs to be incremented. The first octet of this object contains the encapsulation type, the remaining octets contain the address of that typ ...

mioxPleEnAddrToX121LkupFlrTime

The most recent value of sysUpTime when the translation from an Encapsulated Address to X.121 address failed to find a corresponding X.121 address.

mioxPleX121ToEnAddrLkupFlrs

The number of times the translation from an X.121 address to an Encapsulated Address failed to find a corresponding Encapsulated Address. Addresses successfully recognized by an algorithm do not increment this counter. This counter reflects the number o ...

mioxPleLastFailedX121Address

The last X.121 address that caused mioxPleX121ToEnAddrLkupFlrs to increase.

mioxPleX121ToEnAddrLkupFlrTime

The most recent value of sysUpTime when the translation from an X.121 address to an Encapsulated Address failed to find a corresponding Encapsulated Address.

mioxPleQbitFailures

The number of times a connection was closed because of a Q-bit failure.

mioxPleQbitFailureRemoteAddress

The remote address of the most recent (last) connection that was closed because of a Q-bit failure.

mioxPleQbitFailureTime

The most recent value of sysUpTime when a connection was closed because of a Q-bit failure. This will also be the last time that mioxPleQbitFailures was incremented.

mioxPleMinimumOpenTimer

The minimum time in milliseconds this interface will keep a connection open before allowing it to be closed. A value of zero indicates no timer.

mioxPleInactivityTimer

The amount of time time in milliseconds this interface will keep an idle connection open before closing it. A value of 2147483647 indicates no timer.

mioxPleHoldDownTimer

The hold down timer in milliseconds. This is the minimum amount of time to wait before trying another call to a host that was previously unsuccessful. A value of 2147483647 indicates the host will not be retried.

mioxPleCollisionRetryTimer

The Collision Retry Timer in milliseconds. The time to delay between call attempts when the maximum number of circuits is exceeded in a call attempt.

mioxPleDefaultPeerId

This identifies the instance of the index in the mioxPeerTable for the default parameters to use with this interface. The entry identified by this object may have a zero length Encapsulation address and a zero length X.121 address. These default parameter ...

mioxPeerTable

This table contains information about the possible peers this machine may exchange packets with.

mioxPeerEntry

Per peer information.

mioxPeerIndex

An index value that distinguished one entry from another. This index is independent of any other index.

mioxPeerStatus

This reports the status of a peer entry. A value of valid indicates a normal entry that is in use by the agent. A value of underCreation indicates a newly created entry which isn't yet in use because the creating management station is still setting value ...

mioxPeerMaxCircuits

The maximum number of X.25 circuits allowed to this peer.

mioxPeerIfIndex

The value of the ifIndex object for the interface to X.25 to use to call the peer.

mioxPeerConnectSeconds

The number of seconds a call to this peer was active. This counter will be incremented by one for every second a connection to a peer was open. If two calls are open at the same time, one second of elapsed real time will results in two seconds of connec ...

mioxPeerX25CallParamId

The instance of the index object in the x25CallParmTable from RFC 1382 for the X.25 call parameters used to communicate with the remote host. The well known value {0 0} indicates no call parameters specified.

mioxPeerEnAddr

The Encapsulation address of the remote host mapped by this table entry. A length of zero indicates the remote IP address is unknown or unspecified for use as a PLE default. The first octet of this object contains the encapsulation type, the remaining oc ...

mioxPeerX121Address

The X.25 address of the remote host mapped by this table entry. A zero length string indicates the X.25 address is unspecified for use as the PLE default.

mioxPeerX25CircuitId

This object identifies the instance of the index for the X.25 circuit open to the peer mapped by this table entry. The well known value {0 0} indicates no connection currently active. For multiple connections, this identifies the index of a multiplexing ...

mioxPeerDescr

This object returns any identification information about the peer. An agent may supply the comment information found in the configuration file entry for this peer. A zero length string indicates no information available.

mioxPeerEncTable

This table contains the list of encapsulations used to communicate with a peer. This table has two indexes, the first identifies the peer, the second distinguishes encapsulation types. The first index identifies the corresponding entry in the mioxPeerTab ...

mioxPeerEncEntry

Per connection information.

mioxPeerEncIndex

The second index in the table which distinguishes different encapsulation types.

mioxPeerEncType

The value of the encapsulation type. For IP encapsulation this will have a value of 204 (hex CC). For SNAP encapsulated packets, this will have a value of 128 (hex 80). For CLNP, ISO 8473, this will have a value of 129 (hex 81). For ES-ES, ISO 9542, t ...