OIDs - access_count
The objects described here can be monitored with the IPHost Network Monitor.
You can start SNMP monitoring using free 30-day trial version of IPHost right now.
OID list for access count
- access Switch Vdsl Line Disc Count
- accessSwitchVdslLineDiscCount 1.3.6.1.4.1.890.1.5.12.1.1.1.1.1.2 (defined in ZYXEL-VDSLLINE-MIB)
Count of the number of disconnection failures since agent reset. - policy Statistics Access Count
- policyStatsAccessCount 1.3.6.1.4.1.800.3.2.5.1.1.7.1.4 (defined in POLICY-MIB)
Total number of times that a policy repository was accessed. The value of this object should be less than PolicyQueryCount, since typically policy entries are cached to minimize repository accesses. - policy Statistics Success Access Count
- policyStatsSuccessAccessCount 1.3.6.1.4.1.800.3.2.5.1.1.7.1.5 (defined in POLICY-MIB)
Total number of successful policy repository accesses. - xylan Ntp Access Restricted Count
- xylanNtpAccessRestrictedCount 1.3.6.1.4.1.800.2.27.5.2.1.4 (defined in XYLAN-NTP-MIB)
Number of packets matched. - Enterasys Load Sharing Network Address Translation Statistics Real Server Access Clients Count
- etsysLsnatStatsRealServerAccessClientsCount 1.3.6.1.4.1.5624.1.2.74.1.1.28 (defined in enterasys-lsnat-mib)
The number of etsysLsnatRealServerAccessClientEntry in the etsysLsnatRealServerAccessClientTable - Enterasys WiFi Protected access Config Group Update Count
- etsysWPAConfigGroupUpdateCount 1.3.6.1.4.1.5624.1.2.32.1.1.1.18 (defined in enterasys-wifi-protected-access-mib)
The number of times the WPA Group update will be retried. - Enterasys WiFi Protected access Config Pairwise Update Count
- etsysWPAConfigPairwiseUpdateCount 1.3.6.1.4.1.5624.1.2.32.1.1.1.20 (defined in enterasys-wifi-protected-access-mib)
The number of times the WPA 4-way handshake will be retried. - ALTIGA Active Remote Access Session Count
- alActiveRemoteAccessSessionCount 1.3.6.1.4.1.3076.2.1.2.17.1.9 (defined in ALTIGA-SESSION-STATS-MIB)
The number of currently active Remote Access sessions. - Cisco Access Control List QoS Acl Hit Count Vlans Low
- caqAclHitCountVlansLow 1.3.6.1.4.1.9.9.179.1.9.1 (defined in CISCO-CATOS-ACL-QOS-MIB)
A string of octets containing one bit per VLAN for VLANs with VlanIndex value of 0 to 2047. The first octet corresponds to VLANs with VlanIndex values of 0 through 7; the second octet to VLANs 8 through 15; etc. The most significant bit of each octet corresponds to the lowest value VlanIndex in that octet. For each VLAN, if ACL hit count feature is enabled then the bit corresponding to that VLAN is set to '1'. Note that if the length of this string is less than 256 octets, any 'missing' octets are assumed to contain the value zero. A NMS may omit any zero-valued octets from the end of this string in order to reduce SetPDU size, and the agent may also omit zero-valued trailing octets, to reduce the size of GetResponse PDUs. This object is only instantiated when the vlanAclHitCount(0) bit is set to '1' in the caqAclFeatureCpb object. - Cisco Access Control List QoS Acl Hit Count Acl Name
- caqAclHitCountAclName 1.3.6.1.4.1.9.9.179.1.9.4.1.2 (defined in CISCO-CATOS-ACL-QOS-MIB)
Indicates the ACL name which should exist in the ACL tables e.g. in caqIpAceTable. This ACL must be matching the type specified in caqAclHitCountAclType in the same row. - Cisco Access Control List QoS Ace Hit Count Enable
- caqAceHitCountEnable 1.3.6.1.4.1.9.9.179.1.9.5.1.4 (defined in CISCO-CATOS-ACL-QOS-MIB)
Indicates whether this ACE hit count is enabled. - Cisco Access Control List QoS Ace Egress Hit Count
- caqAceEgressHitCount 1.3.6.1.4.1.9.9.179.1.9.5.1.6 (defined in CISCO-CATOS-ACL-QOS-MIB)
Indicates number of hit count for this ACE for egress traffic. - Cisco Access Control List QoS If Acl Hit Count Table
- caqIfAclHitCountTable 1.3.6.1.4.1.9.9.179.1.9.6 (defined in CISCO-CATOS-ACL-QOS-MIB)
This table provides the ACL hit count statistics at an interface. An interface can be a physical port if the bit portAclHitCount(1) is set in the object caqAclFeatureCpb or a VLAN if the bit vlanAclHitCount(0) is set in the object caqAclFeatureCpb. - Cisco Access Control List QoS If Acl Hit Count Ace Index
- caqIfAclHitCountAceIndex 1.3.6.1.4.1.9.9.179.1.9.6.1.3 (defined in CISCO-CATOS-ACL-QOS-MIB)
The index of an ACE within an ACL. - Cisco Access Control List QoS Acl Hit Count Group
- caqAclHitCountGroup 1.3.6.1.4.1.9.9.179.3.2.34 (defined in CISCO-CATOS-ACL-QOS-MIB)
A collection of objects providing the ACL hit count configuration and statistics on the device. - Cisco Access Control List QoS Vlan Acl Hit Count Group
- caqVlanAclHitCountGroup 1.3.6.1.4.1.9.9.179.3.2.39 (defined in CISCO-CATOS-ACL-QOS-MIB)
A collection of objects providing the set of VLANs where ACL hit count feature is enabled.