The objects described here can be monitored with the IPHost Network Monitor.
You can start SNMP monitoring using free 30-day trial version of IPHost right now.
OID list for alarm time
- fault Current Alarm Set Time
- faultCurrentAlarmSetTime 1.3.6.1.4.1.43.1.12.3.1.1.6.3.1.7 (defined in 3comab9300)
The time when the alarm was set. - fault History Alarm Set Time
- faultHistoryAlarmSetTime 1.3.6.1.4.1.43.1.12.3.1.1.6.4.1.7 (defined in 3comab9300)
The time when the alarm was set. - fault History Alarm Clear Time
- faultHistoryAlarmClearTime 1.3.6.1.4.1.43.1.12.3.1.1.6.4.1.9 (defined in 3comab9300)
The time when the alarm was cleared. - alarm Set Time
- alarmSetTime 1.3.6.1.4.1.43.1.12.3.1.1.6.5.5 (defined in C-PRODUCT-TRAP-MIB)
The time when an alarm was generated. - alarm Clear Time
- alarmClearTime 1.3.6.1.4.1.43.1.12.3.1.1.6.5.6 (defined in C-PRODUCT-TRAP-MIB)
The time when an alarm was cleared. For active alarms, the value of this object contains all zero's. For cleared alarms, this object contains the time when the alarms were cleared. - ups Alarm Time
- upsAlarmTime 1.3.6.1.2.1.33.1.6.2.1.3 (defined in rfc1628)
The value of sysUpTime when the alarm condition was detected. If the alarm condition was detected at the time of agent startup and presumably existed before agent startup, the value of upsAlarmTime shall equal 0. - Cabletron Remote Physical Alarm Time Out
- ctRemPhysAlarmTimeOut 1.3.6.1.4.1.52.4.1.2.7.2.1.2.1.9 (defined in ctron-remote-access-mib)
Whenever the physical port is configured for nailed-up PPP this object specifies the time the physical port must remain in a failed state as a condition to begin the backup procedure. The backup procedure is begun for any active interface(s) that were connected over the failed physical port and which have been configured for backup. - Cisco Content Engine Alarm History Time Stamp
- cceAlarmHistTimeStamp 1.3.6.1.4.1.9.9.178.1.6.1.2.1.8 (defined in CISCO-CONTENT-ENGINE-MIB)
This object specifies the value of the sysUpTime object at the time the alarm was generated. - Cisco Content Service Net Server Response Time Fail Alarm Threshold
- ccsNetServerResponseTimeFailAlarmThreshold 1.3.6.1.4.1.9.9.597.1.1.1.1.9 (defined in CISCO-CONTENT-SERVICES-MIB)
This object specifies the alarm threshold of the number of the responses specified by ccsNetServerResponseTimeFailCountNotifInfo for the first payload packet from the network server exceeds the response time ccsNetServerFirstPayloadResponseTime within the time interval (ccsAdControlAlarmUpdateTimer). When ccsAdControlNotifEnabled is set to 'true', the count is greater than the threshold and no alarm notification specified by ciscoContentServicesNetServerResponseTimeExceeded has been issued, the alarm notification will be generated and the timer will be re-started. The threshold should be greater than the clear threshold ccsNetServerResponseTimeFailClearThreshold. When the threshold is changed, the counter will be reset, the alarm will be cleared if exists, and the timer will be re-started. - Cisco Digital Signal Processing Last Alarm Time
- cdspLastAlarmTime 1.3.6.1.4.1.9.9.86.1.2.1.1.5 (defined in CISCO-DSP-MGMT-MIB)
The value of sysUpTime when the last DSP Alarm occurred. The value of this object is 0 if the value of cdspLastAlarmCause object is 'noAlarm'. - Cisco Entity Alarm History Time Stamp
- ceAlarmHistTimeStamp 1.3.6.1.4.1.9.9.138.1.3.3.1.6 (defined in CISCO-ENTITY-ALARM-MIB)
This object specifies the value of the sysUpTime object at the time the alarm was generated.
