The objects described here can be monitored with the IPHost Network Monitor.
You can start SNMP monitoring using free 30-day trial version of IPHost right now.
OID list for dead interval
- ospf If Router Dead Interval
- ospfIfRtrDeadInterval 1.3.6.1.2.1.14.7.1.10 (defined in rfc1253)
The number of seconds that a router's Hello packets have not been seen before it's neighbors declare the router down. This should be some multiple of the Hello interval. This value must be the same for all routers attached to a common network. - ospf Virtual If Router Dead Interval
- ospfVirtIfRtrDeadInterval 1.3.6.1.2.1.14.9.1.6 (defined in rfc1253)
The number of seconds that a router's Hello packets have not been seen before it's neighbors declare the router down. This should be some multiple of the Hello interval. This value must be the same for the virtual neighbor. - ospf If Router Dead Interval
- ospfIfRtrDeadInterval 1.3.6.1.2.1.14.7.1.10 (defined in rfc1850)
The number of seconds that a router's Hello packets have not been seen before it's neigh- bors declare the router down. This should be some multiple of the Hello interval. This value must be the same for all routers attached to a common network. - ospf Virtual If Router Dead Interval
- ospfVirtIfRtrDeadInterval 1.3.6.1.2.1.14.9.1.6 (defined in rfc1850)
The number of seconds that a router's Hello packets have not been seen before it's neigh- bors declare the router down. This should be some multiple of the Hello interval. This value must be the same for the virtual neigh- bor. - vlan Sflsp Interfaces Dead Interval
- vlanSflspInterfacesDeadInterval 1.3.6.1.4.1.52.4.2.12.1.2.7.3.1.1.10 (defined in ctron-sfps-sflsp-mib)
The number of seconds that a switch's Hello packets have not been seen before it's neighbors declare the switch down. This should be some multiple of the Hello interval. This value must be the same for all switches attached to a common network. - Cisco Fabric Shortest Path First If Dead Interval
- fspfIfDeadInterval 1.3.6.1.4.1.9.9.287.1.2.1.3 (defined in CISCO-FSPF-MIB)
Maximum time for which no HELLO messages can be received on this interface on this VSAN. After this time, the interface is assumed to be broken and removed from the database. Note that this value must be greater than the HELLO interval specified on this interface on this VSAN. - Juniper Ospfv3 If Rtr Dead Interval
- jnxOspfv3IfRtrDeadInterval 1.3.6.1.4.1.2636.5.4.1.1.7.1.10 (defined in JUNIPER-OSPFV3-MIB)
The number of seconds that a router's Hello packets have not been seen before its neighbors declare the router down on the interface. This should be some multiple of the Hello interval. This value must be the same for all routers attached to a common network. - Juniper Ospfv3 Virtual If Rtr Dead Interval
- jnxOspfv3VirtIfRtrDeadInterval 1.3.6.1.4.1.2636.5.4.1.1.8.1.8 (defined in JUNIPER-OSPFV3-MIB)
The number of seconds that a router's Hello packets have not been seen before its neighbors declare the router down. This should be some multiple of the Hello interval. This value must be the same for the virtual neighbor. - Switch L3ospf Virtual If Rtr Dead Interval
- swL3ospfVirtIfRtrDeadInterval 1.3.6.1.4.1.171.11.70.5.3.7.1.6 (defined in DES3528-SWL3MGMT-MIB)
The number of seconds that a router's Hello packets have not been seen before it's neigh- bors declare the router down. This should be some multiple of the Hello interval. This value must be the same for the virtual neigh- bor. - Switch L3ospf If Rtr Dead Interval
- swL3ospfIfRtrDeadInterval 1.3.6.1.4.1.171.11.70.5.3.8.1.10 (defined in DES3528-SWL3MGMT-MIB)
The number of seconds that a router's Hello packets have not been seen before it's neigh- bors declare the router down. This should be some multiple of the Hello interval. This value must be the same for all routers attached to a common network. - Switch L3ospf Virtual If Rtr Dead Interval
- swL3ospfVirtIfRtrDeadInterval 1.3.6.1.4.1.171.11.70.5.3.7.1.6 (defined in DES3552-SWL3MGMT-MIB)
The number of seconds that a router's Hello packets have not been seen before it's neigh- bors declare the router down. This should be some multiple of the Hello interval. This value must be the same for the virtual neigh- bor. - Switch L3ospf If Rtr Dead Interval
- swL3ospfIfRtrDeadInterval 1.3.6.1.4.1.171.11.70.5.3.8.1.10 (defined in DES3552-SWL3MGMT-MIB)
The number of seconds that a router's Hello packets have not been seen before it's neigh- bors declare the router down. This should be some multiple of the Hello interval. This value must be the same for all routers attached to a common network. - Switch L3ospf Virtual If Rtr Dead Interval
- swL3ospfVirtIfRtrDeadInterval 1.3.6.1.4.1.171.11.70.5.3.7.1.6 (defined in DES3612-SWL3MGMT-MIB)
The number of seconds that a router's Hello packets have not been seen before it's neigh- bors declare the router down. This should be some multiple of the Hello interval. This value must be the same for the virtual neigh- bor. - Switch L3ospf If Rtr Dead Interval
- swL3ospfIfRtrDeadInterval 1.3.6.1.4.1.171.11.70.5.3.8.1.10 (defined in DES3612-SWL3MGMT-MIB)
The number of seconds that a router's Hello packets have not been seen before it's neigh- bors declare the router down. This should be some multiple of the Hello interval. This value must be the same for all routers attached to a common network. - Switch L3ospf Virtual If Rtr Dead Interval
- swL3ospfVirtIfRtrDeadInterval 1.3.6.1.4.1.171.11.70.5.3.7.1.6 (defined in DES3627-SWL3MGMT-MIB)
The number of seconds that a router's Hello packets have not been seen before it's neigh- bors declare the router down. This should be some multiple of the Hello interval. This value must be the same for the virtual neigh- bor. - Switch L3ospf If Rtr Dead Interval
- swL3ospfIfRtrDeadInterval 1.3.6.1.4.1.171.11.70.5.3.8.1.10 (defined in DES3627-SWL3MGMT-MIB)
The number of seconds that a router's Hello packets have not been seen before it's neigh- bors declare the router down. This should be some multiple of the Hello interval. This value must be the same for all routers attached to a common network. - Switch L3ospf Virtual If Rtr Dead Interval
- swL3ospfVirtIfRtrDeadInterval 1.3.6.1.4.1.171.11.70.5.3.7.1.6 (defined in DES3650-SWL3MGMT-MIB)
The number of seconds that a router's Hello packets have not been seen before it's neigh- bors declare the router down. This should be some multiple of the Hello interval. This value must be the same for the virtual neigh- bor. - Switch L3ospf If Rtr Dead Interval
- swL3ospfIfRtrDeadInterval 1.3.6.1.4.1.171.11.70.5.3.8.1.10 (defined in DES3650-SWL3MGMT-MIB)
The number of seconds that a router's Hello packets have not been seen before it's neigh- bors declare the router down. This should be some multiple of the Hello interval. This value must be the same for all routers attached to a common network. - Switch L3ospf Virtual If Rtr Dead Interval
- swL3ospfVirtIfRtrDeadInterval 1.3.6.1.4.1.171.11.70.5.3.7.1.6 (defined in SWL3MGMT-MIB)
The number of seconds that a router's Hello packets have not been seen before it's neigh- bors declare the router down. This should be some multiple of the Hello interval. This value must be the same for the virtual neigh- bor. - Switch L3ospf If Rtr Dead Interval
- swL3ospfIfRtrDeadInterval 1.3.6.1.4.1.171.11.70.5.3.8.1.10 (defined in SWL3MGMT-MIB)
The number of seconds that a router's Hello packets have not been seen before it's neigh- bors declare the router down. This should be some multiple of the Hello interval. This value must be the same for all routers attached to a common network.
