The objects described here can be monitored with the IPHost Network Monitor.
You can start SNMP monitoring using free 30-day trial version of IPHost right now.
OID list for error threshold
- tsm Admin Switch Mode high Error Threshold
- tsmAdminSwModeHiErrThresh 1.3.6.1.4.1.800.2.19.1.1.2.1.2 (defined in TSMEXT-MIB)
The high error threshold in percent for all ports associated with the TSM which are configured to run in adaptive mode. If the percentage of errors in a sampling period meets or exceeds this value, the port's switching mode will change from cut-through to store-and-forward mode. - tsm Admin Switch Mode Low Error Threshold
- tsmAdminSwModeLoErrThresh 1.3.6.1.4.1.800.2.19.1.1.2.1.3 (defined in TSMEXT-MIB)
The low error threshold in percent for all ports associated with the TSM which are configured to run in adaptive mode. If the percentage of errors in a sampling period falls below this value, the port's switching mode will change from store-and-forward to cut-through mode. - tsm Operation Switch Mode high Error Threshold
- tsmOperSwModeHiErrThresh 1.3.6.1.4.1.800.2.19.1.2.2.1.2 (defined in TSMEXT-MIB)
The operational high error threshold for all ports associated with the TSM which are configured to run in adaptive mode. If the percentage of errors in a sampling period meets or exceeds this value, the port's switching mode will change from cut-through to store-and-forward mode. - tsm Operation Switch Mode Low Error Threshold
- tsmOperSwModeLoErrThresh 1.3.6.1.4.1.800.2.19.1.2.2.1.3 (defined in TSMEXT-MIB)
The operational low error threshold for all ports associated with the TSM which are configured to run in adaptive mode. If the percentage of errors in a sampling period falls below this value, the port's switching mode will change from store-and-forward to cut-through mode. - snmp Fddi MAC Frame Error Threshold
- snmpFddiMACFrameErrorThreshold 1.3.6.1.2.1.10.15.2.2.1.23 (defined in rfc1285)
A threshold for determining when a MAC Condition report should be generated. The condition is true when the ratio, ((delta snmpFddiMACLostCt + delta snmpFddiMACErrorCt) / (delta snmpFddiMACFrameCt + delta snmpFddiMACLostCt)) x 2**16. exceeds the threshold. It is used to determine when a station has an unacceptable frame error threshold. The sampling algorithm is implementation dependent. Any attempt to set this variable to a value of less than one shall result in a badValue error. Those who are familiar with the SNMP management framework will recognize that thresholds are not in keeping with the SNMP philosophy. However, this variable is supported by underlying SMT implementations already and maintaining this threshold should not pose an undue additional burden on SNMP agent implementors. - Frame Relay Dlcmi Error Threshold
- frDlcmiErrorThreshold 1.3.6.1.2.1.10.32.1.1.7 (defined in rfc1315)
This is the maximum number of unanswered Status Enquiries the equipment shall accept be- fore declaring the interface down. - fddimib MAC Frame Error Threshold
- fddimibMACFrameErrorThreshold 1.3.6.1.2.1.10.15.73.2.2.1.26 (defined in rfc1512)
A threshold for determining when a MAC Condition report (see ANSI 8.3.1.1) shall be generated. Stations not supporting variable thresholds shall have a value of 0 and a range of (0..0). - Compaq Server Health Correct Memory Error Count Threshold
- cpqHeCorrMemErrorCntThresh 1.3.6.1.4.1.232.6.2.3.5 (defined in CPQHLTH)
The error threshold for Correctable memory errors. When cpqHeCorrMemErrCount is greater than or equal to this value user action is required to replace the failing memory module. - Device Error Threshold
- devErrorThreshold 1.3.6.1.4.1.43.1.12.3.1.1.6.5.1.3.2 (defined in irm3-mib)
This object represents the percentage of errors per good packet that will generate an alarm. - bd Error Threshold
- bdErrorThreshold 1.3.6.1.4.1.43.1.12.3.1.1.6.5.2.3.2 (defined in irm3-mib)
This object represents the percentage of errors per good packet that will generate an alarm. - port Error Threshold
- portErrorThreshold 1.3.6.1.4.1.43.1.12.3.1.1.6.5.3.3.2 (defined in irm3-mib)
This object represents the percentage of errors per good packet that will generate an alarm. - port Threshold FCS Error Per Sec
- portThreshFCSErrPerSec 1.3.6.1.4.1.173.7.8.2.2.1.6 (defined in netlink-specific-mib)
The threshold for FCS errors per second on the port. - port Threshold Tx Error Ratio
- portThreshTxErrorRatio 1.3.6.1.4.1.173.7.8.2.2.1.8 (defined in netlink-specific-mib)
The threshold for Txmit error ratio on the port. - port Threshold Rx Error Ratio
- portThreshRxErrorRatio 1.3.6.1.4.1.173.7.8.2.2.1.9 (defined in netlink-specific-mib)
The threshold for Rcv error ratio on the port. - Device Error Threshold
- devErrorThreshold 1.3.6.1.4.1.43.1.12.3.1.1.6.5.1.3.2 (defined in repeater-mib-2)
The percentage of errors per good packet detected by the device within the device timebase that will cause a device error alarm trap to be sent. The minimum is 1, the maximum is 100. - bd Error Threshold
- bdErrorThreshold 1.3.6.1.4.1.43.1.12.3.1.1.6.5.2.3.2 (defined in repeater-mib-2)
The percentage of errors per good packet detected by the specified board within the device timebase that will cause a board error alarm trap to be sent. The minimum is 1, the maximum is 100. - port Error Threshold
- portErrorThreshold 1.3.6.1.4.1.43.1.12.3.1.1.6.5.3.3.2 (defined in repeater-mib-2)
The percentage of errors per good packet detected by the specified port within the device timebase that will cause a port error alarm trap to be sent. The minimum is 1, the maximum is 100. - Repeater Alarms Error Threshold
- rptrAlarmsErrThreshold 1.3.6.1.4.1.52.4.1.1.1.4.1.3.6 (defined in repeater-rev4-mib)
The percentage of errors per good packet within the timebase that will cause an alarm. The units of this value is in seconds. - Repeater Port Group Alarm Error Threshold
- rptrPortGrpAlarmErrThreshold 1.3.6.1.4.1.52.4.1.1.1.4.2.3.1.9 (defined in repeater-rev4-mib)
Get/Set the percentage of errors per good packet within the timebase that will cause an alarm. - Repeater Port Alarm Error Threshold
- rptrPortAlarmErrThreshold 1.3.6.1.4.1.52.4.1.1.1.4.3.3.1.10 (defined in repeater-rev4-mib)
Get/Set the percentage of errors per good packet within the timebase that will cause an alarm. - Cisco Catalyst 6000 Crossbar Error Recovery Threshold Pers Link
- cc6kxbarErrRcvryThreshPersLink 1.3.6.1.4.1.9.9.217.1.8.2 (defined in CISCO-CAT6K-CROSSBAR-MIB.)
Specifies the threshold on persistent fabric link errors occurring in a channel for the fabric error recovery feature. - Cisco Catalyst 6000 Crossbar Error Recovery Threshold Group
- cc6kxbarErrRcvryThresholdGroup 1.3.6.1.4.1.9.9.217.3.2.28 (defined in CISCO-CAT6K-CROSSBAR-MIB.)
A collection of objects providing the configuration of thresholds on fabric link errors for the fabric error recovery feature. - Cisco DOT3 Oam Error Sym Period Threshold high
- cdot3OamErrSymPeriodThresholdHi 1.3.6.1.4.1.9.10.136.1.5.1.3 (defined in CISCO-DOT3-OAM-MIB)
The two objects cdot3OamErrSymPeriodThresholdHi and cdot3OamErrSymPeriodThresholdLo together form an unsigned 64-bit integer representing the number of symbol errors that must occur within a given window to cause this event. This is defined as cdot3OamErrSymPeriodThreshold = ((2^32) * cdot3OamErrSymPeriodThresholdHi) + cdot3OamErrSymPeriodThresholdLo If cdot3OamErrSymPeriodThreshold symbol errors occur within a window of cdot3OamErrSymPeriodWindow symbols, an Event Notification OAMPDU should be generated with an Errored Symbol Period Event TLV indicating the threshold has been crossed in this window. The default value for cdot3OamErrSymPeriodThreshold is one symbol errors. If the threshold value is zero, then an Event Notification OAMPDU is sent periodically (at the end of every window). This can be used as an asynchronous notification to the peer OAM entity of the statistics related to this threshold crossing alarm. REFERENCE "[802.3ah], 30.3.6.1.34 - Cisco DOT3 Oam Error Sym Period Threshold Low
- cdot3OamErrSymPeriodThresholdLo 1.3.6.1.4.1.9.10.136.1.5.1.4 (defined in CISCO-DOT3-OAM-MIB)
The two objects cdot3OamErrSymPeriodThresholdHi and cdot3OamErrSymPeriodThresholdLo together form an unsigned 64-bit integer representing the number of symbol errors that must occur within a given window to cause this event. This is defined as cdot3OamErrSymPeriodThreshold = ((2^32) * cdot3OamErrSymPeriodThresholdHi) + cdot3OamErrSymPeriodThresholdLo If cdot3OamErrSymPeriodThreshold symbol errors occur within a window of cdot3OamErrSymPeriodWindow symbols, an Event Notification OAMPDU should be generated with an Errored Symbol Period Event TLV indicating the threshold has been crossed in this window. The default value for cdot3OamErrSymPeriodThreshold is one symbol error. If the threshold value is zero, then an Event Notification OAMPDU is sent periodically (at the end of every window). This can be used as an asynchronous notification to the peer OAM entity of the statistics related to this threshold crossing alarm. REFERENCE "[802.3ah], 30.3.6.1.34 - Cisco DOT3 Oam Error Frame Period Threshold
- cdot3OamErrFramePeriodThreshold 1.3.6.1.4.1.9.10.136.1.5.1.7 (defined in CISCO-DOT3-OAM-MIB)
The number of frame errors that must occur for this event to be triggered. The default value is one frame error. If the threshold value is zero, then an Event Notification OAMPDU is sent periodically (at the end of every window). This can be used as an asynchronous notification to the peer OAM entity of the statistics related to this threshold crossing alarm. If cdot3OamErrFramePeriodThreshold frame errors occur within a window of cdot3OamErrFramePeriodWindow frames, an Event Notification OAMPDU should be generated with an Errored Frame Period Event TLV indicating the threshold has been crossed in this window. REFERENCE "[802.3ah], 30.3.6.1.38 - Cisco DOT3 Oam Error Frame Threshold
- cdot3OamErrFrameThreshold 1.3.6.1.4.1.9.10.136.1.5.1.10 (defined in CISCO-DOT3-OAM-MIB)
The number of frame errors that must occur for this event to be triggered. The default value is one frame error. If the threshold value is zero, then an Event Notification OAMPDU is sent periodically (at the end of every window). This can be used as an asynchronous notification to the peer OAM entity of the statistics related to this threshold crossing alarm. If cdot3OamErrFrameThreshold frame errors occur within a window of cdot3OamErrFrameWindow (in tenths of seconds), an Event Notification OAMPDU should be generated with an Errored Frame Event TLV indicating the threshold has been crossed in this window. REFERENCE "[802.3ah], 30.3.6.1.36 - Cisco DOT3 Oam Error Frame Secs Summary Threshold
- cdot3OamErrFrameSecsSummaryThreshold 1.3.6.1.4.1.9.10.136.1.5.1.13 (defined in CISCO-DOT3-OAM-MIB)
The number of errored frame seconds that must occur for this event to be triggered. The default value is one errored frame second. If the threshold value is zero, then an Event Notification OAMPDU is sent periodically (at the end of every window). This can be used as an asynchronous notification to the peer OAM entity of the statistics related to this threshold crossing alarm. If cdot3OamErrFrameSecsSummaryThreshold frame errors occur within a window of cdot3OamErrFrameSecsSummaryWindow (in tenths of seconds), an Event Notification OAMPDU should be generated with an Errored Frame Seconds Summary Event TLV indicating the threshold has been crossed in this window. REFERENCE "[802.3ah], 30.3.6.1.40 - Frame Relay Svc Dlcmi Error Threshold
- frSvcDlcmiErrorThreshold 1.3.6.1.2.1.10.32.7.1.1.1.9 (defined in ibm-frsvc)
This is the implementation specific number of times that the STATUS ENQUIRY Timer, T322, will be retried. - ad Vqm Threshold Lqmos Error
- adVqmThresholdLqmosError 1.3.6.1.4.1.664.5.53.5.3.3.4 (defined in ADTRAN-AOS-VQM)
Listening Quality MOS threshold value for error event. - ad Vqm Threshold Pqmos Error
- adVqmThresholdPqmosError 1.3.6.1.4.1.664.5.53.5.3.3.8 (defined in ADTRAN-AOS-VQM)
Normalized PESQ MOS threshold value for error event. - ad Vqm Threshold Out Of Order Error
- adVqmThresholdOutOfOrderError 1.3.6.1.4.1.664.5.53.5.3.3.12 (defined in ADTRAN-AOS-VQM)
Out of order packet threshold value for error event. - ad Vqm Threshold Loss Error
- adVqmThresholdLossError 1.3.6.1.4.1.664.5.53.5.3.3.16 (defined in ADTRAN-AOS-VQM)
Loss of packet threshold value for error event. - ad Vqm Threshold Jitter Error
- adVqmThresholdJitterError 1.3.6.1.4.1.664.5.53.5.3.3.20 (defined in ADTRAN-AOS-VQM)
Jitter threshold value for error event.
