The objects described here can be monitored with the IPHost Network Monitor.
You can start SNMP monitoring using free 30-day trial version of IPHost right now.
OID list for max threshold
- Compaq Console Management Controller Threshold Max Temp2
- cpqCmcThresholdMaxTemp2 1.3.6.1.4.1.232.153.2.2.2.2.4 (defined in CPQCMC)
Threshold value maximum temperature 2 - Compaq Console Management Controller Threshold Max Humidity
- cpqCmcThresholdMaxHumidity 1.3.6.1.4.1.232.153.2.2.2.2.13 (defined in CPQCMC)
Threshold high value Humidity alarm - Cabletron Smart Switch Router CPU Max Threshold
- capCPUMaxThreshold 1.3.6.1.4.1.52.2501.1.270.2.1.1.10 (defined in ctron-ssr-capacity-mib)
The CPU utilization expressed as an integer percentage. This value represents the threshold maximum for capCPUCurrentUtilization which causes generation of the envCPUThresholdTrap. Another trap is not generated until the capCPUCurrentUtilization value has dropped below capCPUMinThreshold. When this value or the value of capCPUMinThreshold is equal to 0, no envCPUThresholdTrap will be generated. - Cisco's ASN Gateway Max Base Station Exceeded Notification Threshold
- cagwMaxBaseStationExceededNotifThreshold 1.3.6.1.4.1.9.9.638.1.4.23 (defined in CISCO-ASN-GATEWAY-MIB)
This object defines a threshold used to indicate when to generate the ciscoAgwMaxBaseStationExceededOnsetNotif and ciscoAgwMaxBaseStationExceededAbateNotif notifications. The threshold is the percentage of the base stations defined by the cagwMaximumBaseStations object. A value of 0 disables both notifications. Here is an example. cagwMaximumBaseStations = 500 cagwMaxBaseStationExceededNotifThreshold = 90 Threshold is 450 base stations. Therefore, the ciscoAgwMaxBaseStationExceededOnsetNotif will be generated when the cagwCurrentBaseStations is greater than or equal to this threshold. The ciscoAgwMaxBaseStationExceededAbateNotif will be generated when the cagwCurrentBaseStations drops below the value of this threshold. Both of these notification can be suppressed as described in the cagwRepeatNotifInterval object. - Cisco's ASN Gateway Max Subscribers Exceeded Notification Threshold
- cagwMaxSubscribersExceededNotifThreshold 1.3.6.1.4.1.9.9.638.1.4.33 (defined in CISCO-ASN-GATEWAY-MIB)
This object defines a threshold used to indicate when to generate the ciscoAgwMaxSubscribersExceededOnsetNotif and ciscoAgwMaxSubscribersExceededAbateNotif notifications. The threshold is the percentage of the subscribers defined by the cagwMaximumSubscribers object. A value of 0 disables both notifications. Here is an example. cagwMaximumSubscribers = 20000 cagwMaxSubscribersExceededNotifThreshold = 90 Threshold is 18000 subscribers. Therefore, the ciscoAgwMaxSubscribersExceededOnsetNotif will be generated when the cagwCurrentSubscribers is greater than or equal to this threshold. The ciscoAgwMaxSubscribersExceededAbateNotif will be generated when the cagwCurrentSubscribers drops below the value of this threshold. Both of these notification can be suppressed as described in the cagwRepeatNotifInterval object. - Cisco ATM QoS Queuing Parameters Class Max Threshold
- caqQueuingParamsClassMaxThre 1.3.6.1.4.1.9.9.279.1.3.2.1.5 (defined in CISCO-ATM-QOS-MIB)
Maximum Threshold value in kbps. - Lightstream Per VC Queueing Rm Threshold Group Max Size
- lsPerVcqRmThreshGrpMaxSize 1.3.6.1.4.1.9.10.10.1.7.1.1.2 (defined in CISCO-ATM-RM-MIB)
This object specifies the maximum number of cells that may occupy this Threshold Group. While any integer in the range can be set, the hardware granularity is in 64-cell units. Therefore, the value installed is [(value / 64) * 64] + 63. If the value of this object is set to -1, the default value for the threshold-group is restored. - Cisco Switch Threshold Groups Per VC Queueing Rm Threshold Group Max Size
- cgrPerVcqRmThreshGrpMaxSize 1.3.6.1.4.1.9.10.10.1.9.1.1.3 (defined in CISCO-ATM-RM-MIB)
This object specifies the maximum number of cells that may occupy this Threshold Group. While any integer in the range can be set, the hardware granularity is in 64-cell units. Therefore, the value installed is [(value / 64) * 64] + 63. Even though the maximum value for this object is 131071, the cell memory actually present in hardware can be less. The agent will allow values for this object not exceeding the actual cell memory present in hardware. If the value of this object is set to -1, the default value for the threshold-group is restored. - rts If Max Threshold
- rtsIfMaxThreshold 1.3.6.1.4.1.9.10.10.1.10.1.1.1 (defined in CISCO-ATM-RM-MIB)
This object reflects the value of the Maximum Threshold installed in the traffic shaper hardware for this interface. This object is expressed in number of cell buffers. This object is not instantiated for interfaces to which it cannot be applied. - rts If Vbr Class Max Threshold Requested
- rtsIfVbrClassMaxThrshRequested 1.3.6.1.4.1.9.10.10.1.10.1.1.7 (defined in CISCO-ATM-RM-MIB)
This object specifies the Traffic Shaper Maximum Cell Buffer Threshold for the VBR Traffic Class. The value of this object is expressed as a percent of the value of rtsIfMaxThreshold object. A set request for this object will succeed only if the value of the ifAdminStatus object for this interface is 'down'. The Traffic Shaping hardware may not have the support to represent all the values and hence the value installed in hardware could be different. And the value installed in hardware will be available through the object rtsIfVbrClassMaxThrshInstalled. This object is not instantiated for interfaces to which it cannot be applied. - rts If Be Class Max Threshold Installed
- rtsIfBeClassMaxThrshInstalled 1.3.6.1.4.1.9.10.10.1.10.1.1.10 (defined in CISCO-ATM-RM-MIB)
This object reflects the value of Maximum Class Threshold for Best-Effort Traffic Class, in number of cell buffers, that is installed in the Traffic Shaping hardware. This object is not instantiated for interfaces to which it cannot be applied. - rts If Vbr Vc Max Threshold Requested
- rtsIfVbrVcMaxThrshRequested 1.3.6.1.4.1.9.10.10.1.10.1.1.11 (defined in CISCO-ATM-RM-MIB)
This object reflects the Maximum Threshold of the per-connection queues of VBR connections(VCs or VPs) in the traffic shaping hardware. The value of this object is expressed in number of cell buffers. Any change made to the value of this object will only effect subsequently established VBR connections and will not impact already existing VBR connections. The Traffic Shaping hardware may not have the support to represent all the values and hence the value installed in hardware could be different. And the value installed in hardware will be available through the object rtsIfVbrVcMaxThrshInstalled. This object is not instantiated for interfaces to which it cannot be applied. - rts If Be Vc Max Threshold Installed
- rtsIfBeVcMaxThrshInstalled 1.3.6.1.4.1.9.10.10.1.10.1.1.14 (defined in CISCO-ATM-RM-MIB)
This object reflects the Maximum Threshold for the per-connection queues of Best-Effort connections(VCs or VPs) that is installed in the Traffic Shaping hardware. The value of this object is expressed in number of cell buffers. This object is not instantiated for interfaces to which it cannot be applied. - Cisco Access Control List QoS Queue Threshold Max Wred Threshold
- caqQueueThreshMaxWredThreshold 1.3.6.1.4.1.9.9.179.1.1.5.1.7 (defined in CISCO-CATOS-ACL-QOS-MIB)
This object specifies the max WRED threshold parameter of a threshold number for the specific port type when WRED drop algorithm is used. This object is instantiated only if the value of caqQueueThreshDropAlgorithm is wred(2). - Cisco Class Based Qos RED Configuration Max Threshold
- cbQosREDCfgMaxThreshold 1.3.6.1.4.1.9.9.166.1.11.1.1.3 (defined in CISCO-CLASS-BASED-QOS-MIB)
Maximum threshold in number of packets. When the average queue length exceeds this number, WRED drops all packets with the specified IP precedence. This is deprecated by cbQosREDClassCfgMaxThreshold. - Cisco Class Based Qos RED Class Configuration Max Threshold Time
- cbQosREDClassCfgMaxThresholdTime 1.3.6.1.4.1.9.9.166.1.11.1.1.9 (defined in CISCO-CLASS-BASED-QOS-MIB)
The maximum WRED threshold value specified in milli-seconds. The milli-second value is internally converted to bytes by using the bandwidth that is available for the class. - Cisco Weighted Random Early Detection/Drop Config Red Max Threshold
- cewredConfigRedMaxThreshold 1.3.6.1.4.1.9.9.222.1.3.2.1.5 (defined in CISCO-ENHANCED-WRED-MIB)
The average queue depth at which WRED may begin to drop all packets. Above this value all the packets will be dropped - agent Cos Queue Mgmt Wred Max Threshold
- agentCosQueueMgmtWredMaxThreshold 1.3.6.1.4.1.4526.10.3.3.2.5.1.4 (defined in NETGEAR-QOS-COS-MIB)
Weighted RED maximum queue threshold, above which all packets are dropped for the current drop precedence level. The value specifies the threshold based on a fraction the overall device queue size in terms of sixteenths (0/16, 1/16, 2/16…, 16/16). Since device implementations vary, the actual value deployed may be rounded up or down accordingly. The default value is calculated from the agentCosQueueIndex and agentCosQueueDropPrecIndex as shown in the following table (values listed for drop precedence levels 1, 2, and 3, respectively): Queue Index 0: 16, 14, 12 Queue Index 1: 16, 14, 12 Queue Index 2: 16, 14, 12 Queue Index 3: 16, 14, 12 Queue Index 4: 16, 14, 12 Queue Index 5: 16, 14, 12 Queue Index 6: 16, 14, 12 Queue Index 7: 16, 14, 12 This object is only used when agentCosQueueMgmtType is set to wred(2). Any value set for this object must be equal to or greater than the value of agentCosQueueMgmtWredMinThreshold. - Cisco Switch QOS If Dropped Config Max Wred Threshold
- csqIfDropConfigMaxWredThreshold 1.3.6.1.4.1.9.9.580.1.4.4.1.7 (defined in CISCO-SWITCH-QOS-MIB)
This object specifies the max WRED threshold parameter of a threshold number for the specific interface when WRED drop algorithm is used. This object is configurable only if 'wred' bit in the value of qosIfCapabilities object for the same ifIndex and traffic direction is set. If value of csqIfDropConfigAlgorithm is not 'wred', this object value has no effect. - Services Differentiated Services Services Max Rate Threshold
- diffServMaxRateThreshold 1.3.6.1.2.1.97.1.8.6.1.5 (defined in DIFFSERV-MIB)
The number of bytes of queue depth at which the rate of a multi-rate scheduler will increase to the next output rate. In the last conceptual row for such a shaper, this threshold is ignored and by convention is zero.
