OIDs - monitor_count
The objects described here can be monitored with the IPHost Network Monitor.
You can start SNMP monitoring using free 30-day trial version of IPHost right now.
OID list for monitor count
- xylan Ntp Statistics Monitor Count
- xylanNtpStatsMonitorCount 1.3.6.1.4.1.800.2.27.3.6.1.5 (defined in XYLAN-NTP-MIB)
this association. - cisco Health Monitor Threshold Exceed Count
- ciscoHealthMonThresholdExceedCount 1.3.6.1.4.1.9.10.28.1.1.1.8 (defined in CISCO-5800-HEALTH-MON-MIB)
Number of times monitoring value exceeded the configured threshold value. - cisco Health Monitor Count Table
- ciscoHealthMonCountTable 1.3.6.1.4.1.9.10.28.1.2 (defined in CISCO-5800-HEALTH-MON-MIB)
The table of mib entries maintained by the health monitor. - cisco Health Monitor Count Entry
- ciscoHealthMonCountEntry 1.3.6.1.4.1.9.10.28.1.2.1 (defined in CISCO-5800-HEALTH-MON-MIB)
An entry in the count table represents the polled data of ceratin mib variables for a router shelf. System controller will do the polling of the mib variables only if system controller can talk to that particular router shelf. - cisco Health Monitor Count Index
- ciscoHealthMonCountIndex 1.3.6.1.4.1.9.10.28.1.2.1.1 (defined in CISCO-5800-HEALTH-MON-MIB)
Unique index for indexing the ciscoHealthMonCountTable. This unique index represents the shelf-id of the monitored shelf. - Cisco Cable QOS monitor Cmts Enforce Rule Byte Count
- ccqmCmtsEnfRuleByteCount 1.3.6.1.4.1.9.9.341.1.1.1.1.7 (defined in CISCO-CABLE-QOS-MONITOR-MIB)
The number of kbytes that the subscriber can transmit in the monitoring duration as indicated by ccqmCmtsEnfRuleMonDuration before being flagged as over consuming. This object cannot be changed when ccqmCmtsEnfRuleRowStatus is active(1). - Cisco Cable QOS monitor Enforce Rule Violate Byte Count
- ccqmEnfRuleViolateByteCount 1.3.6.1.4.1.9.9.341.1.2.2.1.4 (defined in CISCO-CABLE-QOS-MONITOR-MIB)
The total kbytes consumed by the subscriber in the monitoring duration as specified in the corresponding enforce rule object ccqmCmtsEnfRuleMonDuration. If the monitoring is restarted due to change in enforce rule or any other circumstance this count will be reset. - Cisco Catalyst 6000 Crossbar Traffic Monitor Switch Bus Utilization Log Count
- cc6kxbarTMSwBusUtilLogCount 1.3.6.1.4.1.9.9.217.1.9.1.4 (defined in CISCO-CAT6K-CROSSBAR-MIB.)
Indicates the number of times the following events are logged for the switching bus: 1. the switching bus traffic utilization has risen above the configured threshold (as specified by cc6kxbarTMSwBusUtilThreshold), or has kept staying above the configured threshold at a logging interval (as specified by cc6kxbarTMSwBusUtilLogInterval). 2. the switching bus traffic utilization has fallen below the configured threshold. - Cisco Catalyst 6000 Crossbar Traffic Monitor Channel Utilization Log Count
- cc6kxbarTMChUtilLogCount 1.3.6.1.4.1.9.9.217.1.9.2.1.1.7 (defined in CISCO-CAT6K-CROSSBAR-MIB.)
Indicates the number of times the following events are logged on a fabric channel for a given direction. 1. the traffic utilization on a fabric channel for a given traffic direction has risen above its corresponding configured threshold (as specified by cc6kxbarTMChUtilThreshold), or has kept staying above the configured threshold at a logging interval (as specified by cc6kxbarTMChUtilLogInterval). 2. the traffic utilization on a fabric channel for a given traffic direciton has fallen below its corresponding configured threshold.