The objects described here can be monitored with the IPHost Network Monitor.
You can start SNMP monitoring using free 30-day trial version of IPHost right now.
OID list for port access
- GroupWise Web Access HTTP Port
- gwWebAccessHTTPPort 1.3.6.1.4.1.23.2.77.1.1.1.14 (defined in GWWEB-MIB)
HTTP Port for this WebAccess agent - access Switch Maintenance Port
- accessSwitchMaintenancePort 1.3.6.1.4.1.890.1.5.1.1.8 (defined in ZYXEL-accessSwitch-MIB)
The port which the maintenance operation should be performed on. The value of 0 means the maintenance should be performed on the system. - dot1d Port Outbound Access Priority Table
- dot1dPortOutboundAccessPriorityTable 1.3.6.1.2.1.17.6.1.2.4 (defined in P-BRIDGE-MIB)
A table mapping Regenerated User Priority to Outbound Access Priority. This is a fixed mapping for all port types, with two options for 802.5 Token Ring. - dot1d Port Outbound Access Priority Entry
- dot1dPortOutboundAccessPriorityEntry 1.3.6.1.2.1.17.6.1.2.4.1 (defined in P-BRIDGE-MIB)
Regenerated User Priority to Outbound Access Priority mapping. - dot1d Port Outbound Access Priority
- dot1dPortOutboundAccessPriority 1.3.6.1.2.1.17.6.1.2.4.1.1 (defined in P-BRIDGE-MIB)
The Outbound Access Priority the received frame is mapped to. - sfps Diag Log Access Port Control
- sfpsDiagLogAccessPortControl 1.3.6.1.4.1.52.4.2.4.2.2.6.1.1.1.10 (defined in ctron-sfps-common-mib)
Leaf to be used to set a port bit mask. This bit mask represents which ports shall be statically set to be an ACCESS port. Bit 0 corresponds to Port 1. - num BS Going To Access Port Drops
- numBSGoingToAccessPortDrops 1.3.6.1.4.1.52.4.2.4.2.1.7.5.15 (defined in ctron-sfps-pktmgr-mib)
- port X25 Admin CUG Inc Access
- portX25AdminCUGIncAccess 1.3.6.1.4.1.173.7.3.1.5.1.16 (defined in netlink-specific-mib)
This flag, when set, indicates whether this port will be allowed to receive calls from outside its CUGs. - port X25 Admin CUG Out Access
- portX25AdminCUGOutAccess 1.3.6.1.4.1.173.7.3.1.5.1.17 (defined in netlink-specific-mib)
This flag, when set, indicates whether this port will be allowed to make calls outside its CUGs. - port X25 Operation CUG Inc Access
- portX25OperCUGIncAccess 1.3.6.1.4.1.173.7.3.1.6.1.16 (defined in netlink-specific-mib)
This flag, when set, indicates whether this port will be able to receive calls from outside its CUGs. - port X25 Operation CUG Out Access
- portX25OperCUGOutAccess 1.3.6.1.4.1.173.7.3.1.6.1.17 (defined in netlink-specific-mib)
This flag, when set, indicates whether this port will be able to make calls outside its CUGs. - Cisco Authentication Framework Port Pre Authentication Open Access
- cafPortPreAuthOpenAccess 1.3.6.1.4.1.9.9.656.1.2.1.1.4 (defined in CISCO-AUTH-FRAMEWORK-MIB)
Specifies if the Pre-Authentication Open Access feature allows clients/devices to gain network access before authentication is performed. A value of 'true' for this object indicates that client/device is able to gain network access before authentication is performed. - Cisco Access Control List QoS Ip Ace Destination Port Operation
- caqIpAceDestPortOp 1.3.6.1.4.1.9.9.179.1.3.2.1.14 (defined in CISCO-CATOS-ACL-QOS-MIB)
Indicates how a packet's destination TCP/UDP port number is to be compared. If the caqIpAceProtocolType object in the same row does not indicate TCP or UDP, this object has to be 'noOperator(1)' and cannot be changed while this row is active, i.e., the value of caqIpAceStatus in the same row has the value 'active(1)'. 'noOperator(1)', which is the default value, means that no comparison is to be made with the destination TCP/UDP port number. lt(2) means less than. gt(3) means greater than. eq(4) means equal. neq(5) means not equal. Those 4 operators are using the caqIpAceDestPort object as an operand which is the only one needed. range(6) means that it compares the port value between two numbers, so this operator needs 2 operands. One operand is the starting port number of the range which is caqIpAceDestPort object, and the other operand is the ending port number of the range which the caqIpAceDestPortRange object is in. - Cisco Access Control List QoS Ip Ace Destination Port
- caqIpAceDestPort 1.3.6.1.4.1.9.9.179.1.3.2.1.15 (defined in CISCO-CATOS-ACL-QOS-MIB)
The destination port number of the TCP or UDP protocol. If the caqIpAceDestPortOp object in the same row is range(6), this object will be the starting port number of the port range. This object cannot be configured if caqIpAceStatus in the same row is active(1) or caqIpAceDestPortOp in the same row is noOperator(1). - Cisco Access Control List QoS Acl Hit Count Port List
- caqAclHitCountPortList 1.3.6.1.4.1.9.9.179.1.9.3 (defined in CISCO-CATOS-ACL-QOS-MIB)
Indicates the set of physical port(s), in bridge port number, where ACL hit count feature is enabled. For each port, if ACL hit count feature is enabled then the bit corresponding to that port is set to '1'. This object is only instantiated when the portAclHitCount(1) bit is set to '1' in the caqAclFeatureCpb object. - Cisco Distributed Director Server Port Access List
- cddServerPortAccessList 1.3.6.1.4.1.9.9.197.1.3.2.1.13 (defined in CISCO-DIST-DIRECTOR-MIB)
Indicates the per-port access list that is used to verify if this server should be selectable as a valid choice for a particular client. This list will only be checked if the access control is turned on for the hostname being looked up. If this object has the value of '0', the less specific per-server access list will be used instead.
