port_config_status monitor - SNMP OIDs

MIBs list

OIDs - port_config_status

The objects described here can be monitored with the IPHost Network Monitor. You can start SNMP monitoring using free 30-day trial version of IPHost right now.

OID list for port config status

dsx3 Port Config Plcp Status
dsx3PortConfigPlcpStatus 1.3.6.1.4.1.800.2.11.2.1.1.5 (defined in XYLAN-DS3-MIB)
This object indicates current status of PLCP. This object only applies to port which sublayer is configured to PLCP. A value of 1 is returned for other cases. The dsx3PortStatsPlcpStatus is a bit map represented as a sum, therfore it can represent multiple alarms. 1 - plcpNoAlarm No alarm present 2 - plcpOof Out of frame 4 - plcpLof Loss of frame 8 - plcpYellow Receive yellow alarm from far-end
dsx3 Port Config Line Status
dsx3PortConfigLineStatus 1.3.6.1.4.1.800.2.11.2.1.1.15 (defined in XYLAN-DS3-MIB)
This object indicates the line status of a ds3/e3 interface. Each bit position (bit-0 to bit-18) represents one failure condition of the interface. Bit-19 and bit-20 are used to represent Timing Marker bit and National Use bit. Note that the SYNTAX type of Counter instead of INTEGER is used here as there are more than 16 different conditions to represent. The followings define the various bit position and their meanings: Bit Description 0: No alarm present 1: Out of Frame Alarm received 2: Loss Of Signal Alarm received 3: Alarm Indication Signal Alarm received 4: Red Alarm received 5: Far End Receive Failure Alarm received (Non E3 G.751 only) Remote Alarm Indication Alarm received (E3 G.751 only) 6: Change Of Frame Alignment Alarm received 7: PLCP Out Of Frame Alarm received 8: PLCP Yellow Alarm received 9: PLCP Framing Bit Error Alarm received 10: PLCP Bit Interleaved Parity Error Alarm received 11: PLCP Loss Of Frames Alarm received 12: PLCP Far End Block Error Alarm received 13: Cell Loss Alarm received 14: Far End Block Error Alarm received 15: Parity Error Alarm received 16: Trail Trace ID Mismatch Alarm received (E3 G.832 only) 17: Rx Payload Type Mismatch Alarm received (E3 G.832 only) 18: Unequipped Payload Type received (E3 G.832 only) 19: Timing Marker Bit (bit 8 of the E3 G.832 Maintenance and Adaptation bye) received. 20: National Use bit (bit 12 of the frame in a E3 G.751 frame) received.
sfps In Port Config Admin Status
sfpsInPortConfigAdminStatus 1.3.6.1.4.1.52.4.2.4.2.1.2.1.1.1.2 (defined in ctron-sfps-port-mib)
Sets the administrative state of the SFPS inbound switch port for which the entry exists.
sfps In Port Config Operation Status
sfpsInPortConfigOperStatus 1.3.6.1.4.1.52.4.2.4.2.1.2.1.1.1.3 (defined in ctron-sfps-port-mib)
Indicates the current operating condition of the SFPS on the inbound switch port for which this entry exists.
sfps In Port Config Link Status
sfpsInPortConfigLinkStatus 1.3.6.1.4.1.52.4.2.4.2.1.2.1.1.1.14 (defined in ctron-sfps-port-mib)
The link status of this port.
sfps Out Port Config Admin Status
sfpsOutPortConfigAdminStatus 1.3.6.1.4.1.52.4.2.4.2.1.2.1.2.1.2 (defined in ctron-sfps-port-mib)
Sets the administrative state of the SFPS outbound switch port for which the entry exists.
sfps Out Port Config Operation Status
sfpsOutPortConfigOperStatus 1.3.6.1.4.1.52.4.2.4.2.1.2.1.2.1.3 (defined in ctron-sfps-port-mib)
Indicates the current operating condition of the SFPS on the outbound switch port for which this entry exists.
sfps Out Port Config Link Status
sfpsOutPortConfigLinkStatus 1.3.6.1.4.1.52.4.2.4.2.1.2.1.2.1.14 (defined in ctron-sfps-port-mib)
The link status of this port.
Cisco 6400NSP Port Config Status
c64PortConfigStatus 1.3.6.1.4.1.9.10.27.1.1.6.1.11 (defined in CISCO-6400-CHASSIS-MIB)
entry.

MIBs list