The objects described here can be monitored with the IPHost Network Monitor.
You can start SNMP monitoring using free 30-day trial version of IPHost right now.
OID list for "port connection"
- atmx Port Connection Type
- atmxPortConnectionType 1.3.6.1.4.1.800.2.4.1.1.1.4 (defined in XYLAN-ATM-MIB)
The connection type of this board. - snmp Fddi PORT Connection Policies
- snmpFddiPORTConnectionPolicies 1.3.6.1.2.1.10.15.4.2.1.5 (defined in rfc1285)
A value that indicates the node's PORT policies. Pc-MAC-LCT, Pc-MAC-Loop, and Pc-MAC-Placement indicate how the respective PC Signaling Capability flags should be set (refer to ANSI SMT 9.4.3.2). The value is a sum. This value initially takes the value zero, then for each PORT policy, 2 raised to a power is added to the sum. The powers are according to the following table: Policy Power Pc-MAC-LCT 0 Pc-MAC-Loop 1 Pc-MAC-Placement 2 - fddimib PORT Connection Policies
- fddimibPORTConnectionPolicies 1.3.6.1.2.1.10.15.73.5.2.1.5 (defined in rfc1512)
A value representing the PORT's connection policies desired in the node. The value of pc- mac-lct is a term used in the PC_MAC_LCT Flag (see 9.4.3.2). The value of pc-mac-loop is a term used in the PC_MAC_Loop Flag. The value is a sum. This value initially takes the value zero, then for each PORT policy, 2 raised to a power is added to the sum. The powers are according to the following table: Policy Power pc-mac-lct 0 pc-mac-loop 1 - fddimib PORT Connection Capabilities
- fddimibPORTConnectionCapabilities 1.3.6.1.2.1.10.15.73.5.2.1.12 (defined in rfc1512)
A value that indicates the connection capabilities of the port. The pc-mac-lct bit indicates that the station has the capability of setting the PC_MAC_LCT Flag. The pc-mac-loop bit indicates that the station has the capability of setting the PC_MAC_Loop Flag (refer to ANSI 9.4.3.2). The value is a sum. This value initially takes the value zero, then for each capability that this port has, 2 raised to a power is added to the sum. The powers are according to the following table: capability Power pc-mac-lct 0 pc-mac-loop 1 - Cabletron Fnb Port Connection Changes
- ctFnbPortConnectionChanges 1.3.6.1.4.1.52.4.1.2.4.1.2.2 (defined in ctron-csmacd-mib)
Maintains the number of times any port within the mangement domain of this MIM changes it's port assignment. - wan Physical Port Connection Index
- wanPhysPortConnectionIndex 1.3.6.1.4.1.52.4.1.2.7.1.1.3.1.1 (defined in ctron-wan-mib)
A value indicating the wan connection this physical port is located on. - Cisco Distributed Director Server Port Connection Intv
- cddServerPortConnIntv 1.3.6.1.4.1.9.9.197.1.3.2.1.3 (defined in CISCO-DIST-DIRECTOR-MIB)
The connect test interval, which is used for empirical verification that the service is available on this port of the server. Setting this object to the value '0' will disable the server connect test on this port of the server. - Switch L2 Port Error Port Connection Status
- swL2PortErrPortConnStatus 1.3.6.1.4.1.171.11.70.5.2.3.3.1.3 (defined in DES3528-L2MGMT-MIB)
This object indicates whether the PortStatus is err-disabled or not. - Switch L2 Port Error Port Connection Status
- swL2PortErrPortConnStatus 1.3.6.1.4.1.171.11.70.5.2.3.3.1.3 (defined in DES3552-L2MGMT-MIB)
This object indicates whether the PortStatus is err-disabled or not. - Switch L2 Port Error Port Connection Status
- swL2PortErrPortConnStatus 1.3.6.1.4.1.171.11.70.5.2.3.3.1.3 (defined in DGS3200-L2MGMT-MIB)
This object indicates whether the PortStatus is err-disabled or not.
