The objects described here can be monitored with the IPHost Network Monitor.
You can start SNMP monitoring using free 30-day trial version of IPHost right now.
OID list for "port list"
- as Packet Forwarding Port List
- asPacketForwardingPortList 1.3.6.1.4.1.890.1.5.1.1.20.1.1 (defined in ZYXEL-accessSwitch-MIB)
The list defines the ports to which the packets will be forwarded. - Cabletron Agent Switch Protected Port Port List
- ctAgentSwitchProtectedPortPortList 1.3.6.1.4.1.52.4.2.33.1.1.18.1.1.3 (defined in ct-fastpath-protected-port-mib)
The set of ports that are protected in this group - Cabletron IGMP Static Out Port List
- ctIGMPStaticOutPortList 1.3.6.1.4.1.52.4.1.3.5.1.5.1.3 (defined in ctron-igmp-mib)
The set of ports configured by management for this multicast group and this VLAN to which multicast group-addressed data frames are to be forwarded. - Cabletron IGMP Ext Cache Out Port List
- ctIGMPExtCacheOutPortList 1.3.6.1.4.1.52.4.1.3.5.1.7.1.8 (defined in ctron-igmp-mib)
The set of bridge ports for this multicast group, VLAN, and source IP address, to which multicast group-addressed data frames are being forwarded. - Cabletron IGMP Discovered Router Port List
- ctIGMPDiscoveredRouterPortList 1.3.6.1.4.1.52.4.1.3.5.1.8.1.3 (defined in ctron-igmp-mib)
The set of bridge ports that IGMP has seen routing protocols, IGMP queries, or ICMP Router Discovery frames on. - Cabletron IGMP Discovered Router Egress Port List
- ctIGMPDiscoveredRouterEgressPortList 1.3.6.1.4.1.52.4.1.3.5.1.8.1.4 (defined in ctron-igmp-mib)
The set of bridge ports that IGMP believes has valid egress. - Cabletron IGMP Discovered Router Static Port List
- ctIGMPDiscoveredRouterStaticPortList 1.3.6.1.4.1.52.4.1.3.5.1.8.1.5 (defined in ctron-igmp-mib)
The set of bridge ports to flood all multicast frames to for this vlan id. This leaf is OPTIONAL - Cabletron Vlan Protocol Port List
- ctVlanProtoPortList 1.3.6.1.4.1.52.4.1.2.16.5.3.1.3 (defined in ctron-vlan-extensions-mib)
The set of ports on the device, specified by ctVlanVID and ctVlanProtoEtherType, that will classify received 'untagged' packets of ctVlanProtoEtherType type, to the VLAN specified by ctVlanVID. Each octet within the value of this object specifies a set of eight ports, with the first octet specifying ports 1 through 8, the second octet specifying ports 9 through 16, etc. Within each octet, the most significant bit represents the lowest numbered port, and the least significant bit represents the highest numbered port. Thus, each port on this device is represented by a single bit within the value of this object. If that bit has a value of '1' then that port is included in the set of ports; the port is not included if its bit has a value of '0'. A set of this object prior to creating an entry by setting ctVlanProtoEstablish will fail with a NO-INSTANCE error. This object will have an initial value '0' for each port that is represented. - Enterasys Cos Inbound Rate Limiting Resource Violation Port List
- etsysCosIrlResourceViolationPortList 1.3.6.1.4.1.5624.1.2.55.1.5.9.1.8 (defined in enterasys-class-of-service-mib)
The dot1dBridge ports this limiter has been violated on. Writing this object will clear the dot1dBridge ports given which have a corresponding bit of zero (0) in the PortList. - Enterasys Cos Outbound Rate Limiter Resource Violation Port List
- etsysCosOrlResourceViolationPortList 1.3.6.1.4.1.5624.1.2.55.1.6.9.1.8 (defined in enterasys-class-of-service-mib)
The dot1dBridge ports this limiter has been violated on. Writing this object will clear the dot1dBridge ports given which have a corresponding bit of zero (0) in the PortList. - Enterasys Cos Flood Control Resource Violation Port List
- etsysCosFloodCtrlResourceViolationPortList 1.3.6.1.4.1.5624.1.2.55.1.7.9.1.5 (defined in enterasys-class-of-service-mib)
The dot1dBridge ports this limiter has been violated on. Writing this object will clear the dot1dBridge ports given which have a corresponding bit of zero (0) in the PortList. - Enterasys Mgmd Ext Cache Include Port List
- etsysMgmdExtCacheIncludePortList 1.3.6.1.4.1.5624.1.2.71.1.4.1.1.5 (defined in enterasys-mgmd-ext-mib)
The set of bridge ports for this multicast group, interface, and source IP address where the entry filter-mode is include. - Enterasys Mgmd Ext Cache Exclude Port List
- etsysMgmdExtCacheExcludePortList 1.3.6.1.4.1.5624.1.2.71.1.4.1.1.6 (defined in enterasys-mgmd-ext-mib)
The set of bridge ports for this multicast group, interface, and source IP address where the entry filter-mode is exclude. - Enterasys Mgmd Ext Discovered Router Static Port List
- etsysMgmdExtDiscoveredRouterStaticPortList 1.3.6.1.4.1.5624.1.2.71.1.5.1.1.4 (defined in enterasys-mgmd-ext-mib)
Indicates if this bridge port on this interface is static. This leaf is OPTIONAL - Enterasys Policy Supported Port List
- etsysPolicySupportedPortList 1.3.6.1.4.1.5624.1.2.6.9.11 (defined in enterasys-policy-profile-mib)
The list ports which support policy profile assignment (i.e. the ports which _do_ policy). This object may be useful to management entities which desire to scope action to only those ports which support policy. A port which appears in this list, must support, at minimum, the assignment of a policy profile to all traffic ingressing the port. - Cisco Access Control List QoS Security Redirect Port List
- caqSecurityRedirectPortList 1.3.6.1.4.1.9.9.179.1.3.9.1.3 (defined in CISCO-CATOS-ACL-QOS-MIB)
Indicates the set of physical port(s) that matched traffic is redirected to. Each octet within the value of this object specifies a set of eight ports, with the first octet specifying ports 1 through 8, the second octet specifying ports 9 through 16, etc. Within each octet, the most significant bit represents the lowest numbered port, and the least significant bit represents the highest numbered port. Thus, each port is represented by a single bit within the value of this object. If that bit has a value of '1' then that port is included in the set of redirect ports; the port is not included if its bit has a value of '0'. The value of this object is ignored whenever the value of caqSecurityAction object in the same row is not redirect(3). - Cisco Access Control List QoS Security Redirect2k Port List
- caqSecurityRedirect2kPortList 1.3.6.1.4.1.9.9.179.1.3.9.1.8 (defined in CISCO-CATOS-ACL-QOS-MIB)
Indicates the set of physical port(s) that matched traffic is redirected to. Each octet within the value of this object specifies a set of eight ports, with the first octet specifying ports 1 through 8, the second octet specifying ports 9 through 16, etc. Within each octet, the most significant bit represents the lowest numbered port, and the least significant bit represents the highest numbered port. Thus, each port is represented by a single bit within the value of this object. If that bit has a value of '1' then that port is included in the set of redirect ports; the port is not included if its bit has a value of '0'. The value of this object is ignored whenever the value of caqSecurityAction object in the same row is not redirect(3). This object can accommodate up to 2048 ports. A port number is the value of dot1dBasePort for the port in the BRIDGE-MIB (RFC 1493). - Cisco Access Control List QoS Acl Hit Count Port List
- caqAclHitCountPortList 1.3.6.1.4.1.9.9.179.1.9.3 (defined in CISCO-CATOS-ACL-QOS-MIB)
Indicates the set of physical port(s), in bridge port number, where ACL hit count feature is enabled. For each port, if ACL hit count feature is enabled then the bit corresponding to that port is set to '1'. This object is only instantiated when the portAclHitCount(1) bit is set to '1' in the caqAclFeatureCpb object.
