The objects described here can be monitored with the IPHost Network Monitor.
You can start SNMP monitoring using free 30-day trial version of IPHost right now.
OID list for port priority
- dot1d Stp Port Priority
- dot1dStpPortPriority 1.3.6.1.2.1.17.2.15.1.2 (defined in BRIDGE-MIB)
The value of the priority field which is contained in the first (in network byte order) octet of the (2 octet long) Port ID. The other octet of the Port ID is given by the value of dot1dStpPort. - dot1d Port Priority Entry
- dot1dPortPriorityEntry 1.3.6.1.2.1.17.6.1.2.1.1 (defined in P-BRIDGE-MIB)
A list of Default User Priorities for each port of a transparent bridge. This is indexed by dot1dBasePort. - dot1d Port Default User Priority
- dot1dPortDefaultUserPriority 1.3.6.1.2.1.17.6.1.2.1.1.1 (defined in P-BRIDGE-MIB)
The default ingress User Priority for this port. This only has effect on media, such as Ethernet, that do not support native User Priority. - dot1d Port Outbound Access Priority
- dot1dPortOutboundAccessPriority 1.3.6.1.2.1.17.6.1.2.4.1.1 (defined in P-BRIDGE-MIB)
The Outbound Access Priority the received frame is mapped to. - v Stp Port Priority
- vStpPortPriority 1.3.6.1.4.1.800.2.2.5.19.1.5 (defined in XYLAN-VLAN-MIB)
The priority of this port which used originally as part of the port ID specified in 802.1D. - dot1d Stp Port Priority
- dot1dStpPortPriority 1.3.6.1.2.1.17.2.15.1.2 (defined in rfc1493)
The value of the priority field which is contained in the first (in network byte order) octet of the (2 octet long) Port ID. The other octet of the Port ID is given by the value of dot1dStpPort. - els100 Switch Priority Port Table
- els100SwitchPriorityPortTable 1.3.6.1.4.1.52.1011.3.17 (defined in ctels100-ng-mib)
The priority port table. - els100 Switch Priority Port Entry
- els100SwitchPriorityPortEntry 1.3.6.1.4.1.52.1011.3.17.1 (defined in ctels100-ng-mib)
An entry in the port priority table. - els100 Switch Priority Port Id
- els100SwitchPriorityPortId 1.3.6.1.4.1.52.1011.3.17.1.1 (defined in ctels100-ng-mib)
The port number, from 1 to number of ports in the system. - Cabletron Priority Classify UDP Port Number
- pClassifyUDPPortNumber 1.3.6.1.4.1.52.4.1.2.14.5.2.1.1.1 (defined in ct-priority-classify-mib)
The UDP destination port number tha qualifies as a candidate for low delay classification. - bdg Port Priority
- bdgPortPriority 1.3.6.1.4.1.173.7.9.1.2.17 (defined in ctron-bdg-mib)
The part of the port identifier which is used with the spanning tree algorithm when determining which port in a LAN segment has priority. The default is 80. - Cabletron Pvst Stp Port Priority
- ctPvstStpPortPriority 1.3.6.1.4.1.52.4.1.2.3.2.2.6.1.3 (defined in ctron-bridge-mib)
The value of the priority field which is contained in the first (in network byte order) octet of the (2 octet long) Port ID. The other octet of the Port ID is given by the value of ctPvstStpPort. - Cabletron Priority Ext Port Entry
- ctPriorityExtPortEntry 1.3.6.1.4.1.52.4.1.2.14.4.2.1 (defined in ctron-priority-extensions-mib)
Specifies the priority associated with a specific physical interface. - Cabletron Priority Ext Port Interface Number
- ctPriorityExtPortInterfaceNum 1.3.6.1.4.1.52.4.1.2.14.4.2.1.2 (defined in ctron-priority-extensions-mib)
The interface number for which the information is requested. - sfps RA Topology Agent Port Priority
- sfpsRATopAgentPortPriority 1.3.6.1.4.1.52.4.2.4.2.2.3.12.3.2.2.1.5 (defined in ctron-sfps-topology-mib)
Priority of the port (used for primary switch election) - sfps RA Topology Agent Port Table API In Priority
- sfpsRATopAgentPortTableAPIInPriority 1.3.6.1.4.1.52.4.2.4.2.2.3.12.3.2.3.6 (defined in ctron-sfps-topology-mib)
Modifies priority of the specified entry - l3 Flow Priority Source Port
- l3FlowPrioritySrcPort 1.3.6.1.4.1.52.2501.1.3.2.1.4 (defined in ctron-ssr-l3-mib)
The source UDP/TCP port for this flow. The Official port numbers are defined in: ftp://ftp.isi.edu/in-notes/iana/assignments/port-numbers - l3 Flow Priority Destination Port
- l3FlowPriorityDstPort 1.3.6.1.4.1.52.2501.1.3.2.1.6 (defined in ctron-ssr-l3-mib)
The destination UDP/TCP port for this flow. Official port numbers are defined in ftp://ftp.isi.edu/in-notes/iana/assignments/port-numbers - port Logical X25 Admin Cxn Priority
- portLogicalX25AdminCxnPriority 1.3.6.1.4.1.173.7.3.1.3.1.2 (defined in netlink-specific-mib)
This field sets the priority of the connection among others on the physical port. The range is 0 for lowest priority to 9 for the highest priority. - port Logical X25 Operation Cxn Priority
- portLogicalX25OperCxnPriority 1.3.6.1.4.1.173.7.3.1.4.1.2 (defined in netlink-specific-mib)
This field sets the priority of the connection among others on the physical port. The range is 0 for lowest priority to 9 for the highest priority. - port DLCI Priority
- portDLCIPriority 1.3.6.1.4.1.173.7.3.2.2.1.11 (defined in netlink-specific-mib)
This field sets the priority of the DLCI among others on the physical port. The range is 0 for lowest priority to 4 for the highest priority. - xst Instance Port Priority
- xstInstancePortPriority 1.3.6.1.4.1.52.4.12.30.1.5.6.5.1.3 (defined in v2h124-24-mib)
Tree Algorithm. If the path cost for all ports on a switch is the same, the port with the highest priority (i.e., lowest value) will be configured as an active link in the Spanning Tree. This makes a port with higher priority less likely to be blocked if the Spanning Tree Algorithm is detecting network loops. Where more than one port is assigned the highest priority, the port with lowest numeric identifier will be enabled. - Enterasys Dot1d Port Priority Table
- etsysDot1dPortPriorityTable 1.3.6.1.4.1.5624.1.2.33.1.1.1 (defined in enterasys-ietf-p-bridge-mib-ext-mib)
Extensions to the table that contains information about every port that is associated with this transparent bridge. - Enterasys Dot1d Port Priority Entry
- etsysDot1dPortPriorityEntry 1.3.6.1.4.1.5624.1.2.33.1.1.1.1 (defined in enterasys-ietf-p-bridge-mib-ext-mib)
A list of extensions that support the management of proprietary features for each port of a transparent bridge. This is indexed by dot1dBasePort. - Enterasys Dot1d Port Priority Rewrite
- etsysDot1dPortPriorityRewrite 1.3.6.1.4.1.5624.1.2.33.1.1.1.1.1 (defined in enterasys-ietf-p-bridge-mib-ext-mib)
The enabled/disabled status of the rewriting of the 802.1P priority in tagged frames on the port. - Enterasys Mstp Port Priority
- etsysMstpPortPriority 1.3.6.1.4.1.5624.1.2.28.1.3.1.1.2 (defined in enterasys-mstp-mib)
The value of the priority field which is contained in the first (in network byte order) octet of the (2 octet long) Port ID for the corresponding Spanning Tree instance. Permissible values are 0-240, in steps of 16. - Cisco Authentication Framework Port Method Admin Priority
- cafPortMethodAdminPriority 1.3.6.1.4.1.9.9.656.1.2.2.1.2 (defined in CISCO-AUTH-FRAMEWORK-MIB)
This object specifies the administrative priority of authentication methods on the port. The priority of each method is assigned based on the method list. Method which is at the beginning of the method list has highest priority. Method which is at the end of method list has lowest priority. A zero length string of this object indicates that no per port method priority configuration has been specified on this port. The actual execution order is based on the value of cafAuthMethodDefaultExecOrder in cafAuthMethodRegTable. - Cisco Authentication Framework Port Method Operation Priority
- cafPortMethodOperPriority 1.3.6.1.4.1.9.9.656.1.2.2.1.5 (defined in CISCO-AUTH-FRAMEWORK-MIB)
This object indicates the operational priority of authentication methods on this port. Methods have the priority as specified in the method list. Method which is at the beginning of the method list has highest priority. Method which is at the end of method list has lowest priority.
