The objects described here can be monitored with the IPHost Network Monitor.
You can start SNMP monitoring using free 30-day trial version of IPHost right now.
OID list for remote address
- Sys Bridge Port Address Remote Address
- a3ComSysBridgePortAddressRemoteAddress 1.3.6.1.4.1.43.29.4.10.5.1.4 (defined in A3COM-SWITCHING-SYSTEMS-BRIDGE-MIB)
The remote MAC address detected on the bridge port identified by to this entry. Setting this object results in an attempt to create a new entry in the table. Since the value of a3ComSysBridgePortAddressIndex is determined automatically internal to the bridge, a set is only successful if the index value specified for a3ComSysBridgePortAddressIndex is zero. A get-next using the values of a3ComSysBridgePortAddressTypeIndex and a3ComSysBridgePortAddressPortIndex can be used to determine the address index assigned to the newly added address entry. - Sys Bridge Vlan Port Address Remote Address
- a3ComSysBridgeVlanPortAddressRemoteAddress 1.3.6.1.4.1.43.29.4.10.8.1.5 (defined in A3COM-SWITCHING-SYSTEMS-BRIDGE-MIB)
The remote MAC address detected on the bridge vlan port identified by to this entry. Setting this object results in an attempt to create a new entry in the table. Since the value of a3ComSysBridgeVlanPortAddressIndex is determined automatically internal to the bridge vlan, a set is only successful if the index value specified for a3ComSysBridgeVlanPortAddressIndex is zero. A get-next using the values of a3ComSysBridgeVlanPortAddressTypeIndex and a3ComSysBridgeVlanPortAddressPortIndex can be used to determine the address index assigned to the newly added address entry. - Sys file transfer Remote Address Type
- a3ComSysFtRemoteAddressType 1.3.6.1.4.1.43.29.4.14.1.1.7 (defined in A3COM-SWITCHING-SYSTEMS-FILE-TRANSFER-MIB)
The type of address which is specified by the corresponding value of a3ComSysFtRemoteAddress. - Sys file transfer Remote Address
- a3ComSysFtRemoteAddress 1.3.6.1.4.1.43.29.4.14.1.1.8 (defined in A3COM-SWITCHING-SYSTEMS-FILE-TRANSFER-MIB)
The address of the source/destination file on the remote system. - Sys Bridge Port Address Remote Address
- a3ComSysBridgePortAddressRemoteAddress 1.3.6.1.4.1.43.29.4.10.5.1.4 (defined in A3COM-SWITCHING-SYSTEMS-MIB)
The remote MAC address detected on the bridge port identified by to this entry. Setting this object results in an attempt to create a new entry in the table. Since the value of a3ComSysBridgePortAddressIndex is determined automatically internal to the bridge, a set is only successful if the index value specified for a3ComSysBridgePortAddressIndex is zero. A get-next using the values of a3ComSysBridgePortAddressTypeIndex and a3ComSysBridgePortAddressPortIndex can be used to determine the address index assigned to the newly added address entry. - Sys File Transfers Remote Address Type
- a3ComSysFtRemoteAddressType 1.3.6.1.4.1.43.29.4.14.1.1.7 (defined in A3COM-SWITCHING-SYSTEMS-MIB)
The type of address which is specified by the corresponding value of a3ComSysFtRemoteAddress. - Sys File Transfers Remote Address
- a3ComSysFtRemoteAddress 1.3.6.1.4.1.43.29.4.14.1.1.8 (defined in A3COM-SWITCHING-SYSTEMS-MIB)
The address of the source/destination file on the remote system. - PNNIx Svcc Routing Control Channel Remote Atm Address
- pnnixSvccRccRemoteAtmAddress 1.3.6.1.4.1.800.3.2.1.1.1.12.1.5 (defined in XPNNI-MIB)
The ATM End System Address to which SVCC establishment is attempted. - atm Le Arp Is Remote Address
- atmLeArpIsRemoteAddress 1.3.6.1.4.1.800.2.4.8.5.1.7 (defined in XYLAN-ATM-MIB)
Indicates whether this entry is for a local or remote MAC address. In this context, 'local' means 'a MAC address that is local to the remote client', as opposed to 'one of my addresses'. true(1) The address is believed to be remote - or its local/remote status is unknown. For an entry created via the LE_ARP mechanism, this corresponds to the 'Remote address' flag being set in the LE_ARP_RESPONSE. During Topology Change periods, remote LE_ARP entries generally age out faster than others. Specifically, they are subject to the Forward Delay Time as well as to the Aging Time. false(2) The address is believed to be local - that is to say, registered with the LES by the client whose ATM address is atmLeArpAtmAddress. For an entry created via the LE_ARP mechanism, this corresponds to the 'Remote address' flag being cleared in the LE_ARP_RESPONSE. - m013 Pppx Config Remote Ip Address
- m013PppxConfigRemoteIpAddress 1.3.6.1.4.1.800.2.25.6.1.1.9 (defined in XYLAN-M013-MIB)
The Remote IP address of the PPP connection. If set to 0.0.0.0 and IP routing is enabled then the IP address will be learned during the IP LCP negotiation. If set to a value then no IP address negotiation will occur. - pppx Config Remote Ip Address
- pppxConfigRemoteIpAddress 1.3.6.1.4.1.800.2.17.1.1.1.13 (defined in XYLAN-PPP-MIB)
The Remote IP address of the PPP connection. If set to 0.0.0.0 and IP routing is enabled then the IP address will be learned during the IP LCP negotiation. If set to a value then no IP address negotiation will occur. - miox Ple Qbit Failure Remote Address
- mioxPleQbitFailureRemoteAddress 1.3.6.1.2.1.10.38.1.1.1.10 (defined in rfc1461)
The remote address of the most recent (last) connection that was closed because of a Q-bit failure. - asp Connection Remote Address
- aspConnRemoteAddress 1.3.6.1.2.1.13.12.9.1.2 (defined in rfc1742)
The remote address of this ASP connection. If this entry is in the listening mode, this object shall have a value of four octets of zero. - adsp Connection Remote Address
- adspConnRemoteAddress 1.3.6.1.2.1.13.13.9.1.3 (defined in rfc1742)
The remote DDP address of this ADSP connection. If this entry specifies an ADSP listener, this value shall be zero. - atport Pto P Remote Address
- atportPtoPRemoteAddress 1.3.6.1.2.1.13.14.1.1.4 (defined in rfc1742)
The network address of the entity at the other end of the point-to-point link in network byte order. The format of this address can be determined by examinating the atportType corresponding to this entry. If the address is unknown or undefined, then this string is zero length. - bsn Remote I Pv4 Address
- bsnRemoteIPv4Address 1.3.6.1.4.1.14179.2.6.2.3 (defined in AIRESPACE-WIRELESS-MIB)
- bsn Syslog Remote Address
- bsnSyslogRemoteAddress 1.3.6.1.4.1.14179.2.7.1.2 (defined in AIRESPACE-WIRELESS-MIB)
This would be the IP Address or host name - CISCO CALL TRACKER TCP Active Remote Ip Address
- ccttActiveRemoteIpAddress 1.3.6.1.4.1.9.9.164.1.1.1.1.3 (defined in CISCO-CALL-TRACKER-TCP-MIB)
The IP address for remote endpoint of the call's TCP connection. This object has the same value as tcpConnRemAddress from TCP-MIB. REFERENCE "RFC 2012 TCP-MIB - Cisco Cdma Ppp No Remote Ip Address Releases
- cCdmaPppNoRemoteIpAddressReleases 1.3.6.1.4.1.9.9.157.1.7.3.1.19 (defined in CISCO-CDMA-PDSN-MIB)
Total number of PPP connections released because MN has no ip address as it rejects the IP address allocated by PDSN.
