The objects described here can be monitored with the IPHost Network Monitor.
You can start SNMP monitoring using free 30-day trial version of IPHost right now.
OID list for update interval
- global Minimum Triggered Update Interval
- globalMinTriggeredUpdateInterval 1.3.6.1.4.1.311.1.11.1.6 (defined in MSIPRIP2-MIB)
Minimum lag time before sending a triggered update. Used to consolidate updates to the route table and reduce number of updates sent. - if CE Full Update Interval
- ifCEFullUpdateInterval 1.3.6.1.4.1.311.1.11.2.2.1.10 (defined in MSIPRIP2-MIB)
Interval between route table annoucements. - rip If Update Interval
- ripIfUpdateInterval 1.3.6.1.4.1.311.1.9.2.1.1.5 (defined in MSRIPSAP-MIB)
For Standard(1) ripIfUpdateMode, this is the interval with which periodic update broadcasts are sent, for AutoStatic(3) ripIfUpdateMode, this is the maximum interval for which router will listen for rip announcements, not used for None(2) ripIfUpdateMode - sap If Update Interval
- sapIfUpdateInterval 1.3.6.1.4.1.311.1.9.2.2.1.5 (defined in MSRIPSAP-MIB)
For Standard(1) ripIfUpdateMode, this is the interval with which periodic update broadcasts are sent, for AutoStatic(3) sapIfUpdateMode, this is the maximum interval for which router will listen for rip announcements. Not used for None (2) sapIfUpdateMode - Enterasys Radius Accounting Client Update Interval
- etsysRadiusAcctClientUpdateInterval 1.3.6.1.4.1.5624.1.2.27.1.2 (defined in enterasys-radius-acct-client-ext-mib)
This indicates how many seconds elapse between accounting interim updates. This parameter value is maintained across system reboots. A value of zero means no Interim Updates. If the value is less than etsysRadiusAcctClientIntervalMinimum, the etsysRadiusAcctClientIntervalMinimum value will be used for the update interval time. If RADIUS Accounting is not enabled, this object is ignored. Note that Accounting Interim Updates are not issued by the RADIUS Accounting Client, unless so requested by the RADIUS Server in an Access Accept packet. - Enterasys Radius Accounting Client Server Update Interval
- etsysRadiusAcctClientServerUpdateInterval 1.3.6.1.4.1.5624.1.2.27.1.4.1.11 (defined in enterasys-radius-acct-client-ext-mib)
This indicates how many seconds elapse between accounting interim updates from the client to this RADIUS server. This parameter value is maintained across system reboots. A value of zero means no Interim Updates. If the value is less than etsysRadiusAcctClientServerIntervalMinimum, the etsysRadiusAcctClientServerIntervalMinimum value will be used for the update interval time. If RADIUS Accounting is not enabled, this object is ignored. Note that Accounting Interim Updates are not issued by the RADIUS Accounting Client, unless so requested by the RADIUS Server in an Access Accept packet. A value of -1 indicates that this object is not configured and this device will use the value configured in etsysRadiusAcctClientUpdateInterval for the minimum value in seconds between accounting interim updates for this RADIUS server. - bsn Global Dot11b Dynamic Channel Update Interval
- bsnGlobalDot11bDynamicChannelUpdateInterval 1.3.6.1.4.1.14179.2.3.2.1.5 (defined in AIRESPACE-WIRELESS-MIB)
When Channel dynamic alogirthm is running, this interval (in secs) specifies how often Channel assignement updates are attempted on an Airespace AP. NOTE: hysteresis is built into the algorithms so we will not have uproductive changes occuring. Default value is 600 secs - bsn Global Dot11a Dynamic Channel Update Interval
- bsnGlobalDot11aDynamicChannelUpdateInterval 1.3.6.1.4.1.14179.2.3.3.1.8 (defined in AIRESPACE-WIRELESS-MIB)
When Channel dynamic alogirthm is running, this interval(in secs) specifies how often Channel assignement updates are attempted on an Airespace AP. NOTE: hysteresis is build into the algorithms so we will not have uproductive changes occuring. Default value is 600 secs - Cisco Customer Voice Portal Lic Interval Last Update
- ccvpLicIntLastUpdate 1.3.6.1.4.1.9.9.590.1.2.4 (defined in CISCO-CVP-MIB)
The interval last update object holds the date and time of the last refresh of interval and aggregate statistic object values. Interval and aggregate statistics are reported at a regular interval (the interval held by the interval period object). - Cisco Customer Voice Portal Service Interval Last Update
- ccvpServiceIntLastUpdate 1.3.6.1.4.1.9.9.590.1.5.1.1.5 (defined in CISCO-CVP-MIB)
The service interval last update object holds the date and time of the last refresh of interval and aggregate statistic object values for this CVP service. Interval and aggregate statistics are reported at a regular interval (the interval held by the interval period object). - CISCO DHCP SNOOPING Database Update Interval
- cdsDatabaseUpdateInterval 1.3.6.1.4.1.9.9.380.1.1.3 (defined in CISCO-DHCP-SNOOPING-MIB)
This object indicates the time interval at which DHCP bindings information will be written to the database file denoted by cdsDatabaseFile object. Setting this object to zero will disable the storage of DHCP bindings. - Cisco Dns Security Interval Unauth Update Requests
- cDnsSecurityIntUnauthUpdateReqs 1.3.6.1.4.1.9.9.405.1.7.9 (defined in CISCO-DNS-SERVER-MIB)
Number of updates which result in ACL not support updates during reporting interval. - Cisco Dns Max Сounter Interval Ha Update Latency Max
- cDnsMaxCntrIntHaUpdLatencyMax 1.3.6.1.4.1.9.9.405.1.11.9 (defined in CISCO-DNS-SERVER-MIB)
Maximum DNS update latency in seconds during reporting interval. Latency is measured as the time an update remains in the pending list. - Cisco Dns Ha Interval Message RR Update Sent counts
- cDnsHaIntMsgRRUpdateSentCnts 1.3.6.1.4.1.9.9.405.1.13.9 (defined in CISCO-DNS-SERVER-MIB)
Number of HA rr-update messages sent during reporting interval. - Cisco Dns Ha Interval Message RR Update Received counts
- cDnsHaIntMsgRRUpdateRcvdCnts 1.3.6.1.4.1.9.9.405.1.13.16 (defined in CISCO-DNS-SERVER-MIB)
Number of HA rr-update messages received during reporting interval. - Cisco Dns Ha Interval Update Private Request counts
- cDnsHaIntUpdatePrivateReqCnts 1.3.6.1.4.1.9.9.405.1.13.25 (defined in CISCO-DNS-SERVER-MIB)
Number of HA DNS updates received containing a private request RR during reporting interval. - Switch Radius Accounting Update Interval
- swRadiusAcctUpdateInterval 1.3.6.1.4.1.171.12.3.4.1 (defined in AUTH-MIB)
Time interval after which this Radius record should be updated and sent to an accounting server.
