A3COM-SWITCHING-SYSTEMS-FILTER-MIB Download

--

The value of next available a3ComFilterAddressGroupId. This object is used for index value to create a new address group.

a3ComFilterAddressGroupCount

The count of defined address groups.

a3ComFilterAddressGroupTable

A list of address group entries. A single entry exists in this list for each defined address group in the system.

a3ComFilterAddressGroupEntry

An individual address group entry.

a3ComFilterAddressGroupId

This object uniquely identifies an address group in the systems. Its value, successively increases starting from 0, will change only if the system is rebooted. This object is obtained from a3ComFilterAddressGroupNextAvailableIndex when a new address grou ...

a3ComFilterAddressGroupMaskId

This object identifies an address group in a bridge. Each address group has an unique mask identifier, range from 1 to 32, associated with it in a bridge. This field has to be set in order to create a new address group in the desired bridge(s).

a3ComFilterAddressGroupBridgeMask

A mask that uniquely identifies the bridge value(s) associated with this address group entry. For example, 0x0000 0000 0000 0003 represents the address group entry in bridge number 1 and 2.

a3ComFilterAddressGroupName

The name of an address group. Each address group has an unique name in a system.

a3ComFilterAddressGroupStatus

The status column for this address group entry. This OBJECT can be set to: createAndGo(4) destroy(6) The following values may be read: active(1) Setting this object to createAndGo(4) will result in the agent attempt to create and commit the row based on ...

a3ComFilterAddressTable

A list of address entries.

a3ComFilterAddressEntry

A set of parameters for a particular address entry.

a3ComFilterAddressId

This object uniquely identifies an address group as defined in a3ComFilterAddressGroupTable. It is obtained from a3ComFilterAddressGroupNextAvailableIndex.

a3ComFilterAddressAddress

The physical address of this entry.

a3ComFilterAddressStatus

The status column for this address group entry. This OBJECT can be set to: createAndGo(4) destroy(6) The following values may be read: active(1) Setting this object to createAndGo(4) will result in the agent attempt to create and commit the row based on ...

a3ComFilterPortGroupNextAvailableIndex

The value of next available a3ComFilterPortGroupId. This object is used for index value to create a new port group.

a3ComFilterPortGroupCount

The count of defined port groups in the system.

a3ComFilterPortGroupTable

A list of port group entries. A single entry exists in this list for each defined port group in the system.

a3ComFilterPortGroupEntry

A set of parameters for an individual port group entry.

a3ComFilterPortGroupId

This object uniquely identifies a port group in the systems. Its value, successively increases starting from 0, will change only if the system is rebooted. This object is obtained from a3ComFilterPortGroupNextAvailableIndex when a new port group is creat ...

a3ComFilterPortGroupMaskId

This object identifies a port group in a bridge. Each port group has an unique mask identifier, range from 1 to 32, associated with it in a bridge. This field has to be set in order to create a new port group in a bridge.

a3ComFilterPortGroupBridgeNumber

The bridge index associated with this port group.

a3ComFilterPortGroupName

The name of this port group. This object has be unique in a system.

a3ComFilterPortGroupStatus

The status column for this port group entry. This OBJECT can be set to: createAndGo(4) destroy(6) The following values may be read: active(1) Setting this object to createAndGo(4) will result in the agent attempting to create and commit the row based on ...

a3ComFilterPortTable

A list of port entries.

a3ComFilterPortEntry

An individual port entry.

a3ComFilterPortId

This object uniquely identify an address group in the systems. It successively increases starting from 1. This value is obtained through a3ComFilterPortGroupNextAvailableIndex when a new port group needs to be created.

a3ComFilterPortType

This indicates interface port type(s) that are currently supported by LanPlex modules.

a3ComFilterPortPort

The port on the bridge identified by port type.

a3ComFilterPortStatus

The status column for this port group entry. This OBJECT can be set to: createAndGo(4) destroy(6) The following values may be read: active(1) Setting this object to createAndGo(4) will result in the agent attempting to create and commit the row based on t ...

a3ComBridgeFilterNextAvailableIndex

The value of next available a3ComBridgeFilterId. This object indicates filter id when a new bridge filter is created through console or ftp download.

a3ComBridgeFilterCount

The count of stored bridge packet filter programs on the bridge.

a3ComBridgeFilterTable

The list of stored bridge packet filter programs on bridge(s), bridge port(s) and port processing path.

a3ComBridgeFilterEntry

The set of parameters for an individual bridge packet filter program.

a3ComBridgeFilterId

An index that uniquely identifies a bridge filter in a system. Its value will change only if the system is rebooted.

a3ComBridgeFilterBridgeNumber

The bridge index associated with this bridge filter program.

a3ComBridgeFilterName

The filter name associated with this entry.

a3ComBridgeFilterProgram

The bridge filter program.

a3ComBridgeFilterStatus

The status column for this filter definition entry. This OBJECT can be set to: createAndGo(4) destroy(6) The following values may be read: active(1) Creation of bridge filter programs can be performed by: 1. Using the build-in editor of the AdminConsole. ...

a3ComPortFilterTable

The list of stored bridge packet filter programs on bridge(s), bridge port(s) and port processing path.

a3ComPortFilterEntry

The set of parameters for an individual bridge packet filter program.

a3ComPortFilterId

An index that uniquely identifies a bridge filter on the bridge.

a3ComPortFilterBridgeNumber

The bridge index associated with this bridge filter program.

a3ComPortFilterBridgePortType

This indicates interface port type(s) that are currently supported by LanPlex modules.

a3ComPortFilterBridgePortPort

The port on the bridge identified by this row's a3ComPortFilterBridgeNumber.

a3ComPortFilterPktProcessPath

The packet processing path to apply the filter. The value is a bit mask defined as follows: Mask Value Path Description 0x1 Xmit All All frames xmitted to segment connected to the port 0x2 Xmit Multicast Multicast+broadcast fr ...

a3ComPortFilterStatus

The status column for this filter definition entry. This OBJECT can be set to: active(1) createAndGo(4) createAndWait(5) destroy(6) The following values may be read: active(1) notInService(2) netReady(3). Creation of bridge filter programs can be performe ...