CISCO-ATM-NETWORK-CLOCK-MIB Download
The MIB module for management of network clock distribution and the
Network Clock Distribution Protocol (NCDP) in Cisco devices
IPHost Network Monitor offer an easy way of SNMP monitoring your Cisco Servers, Routers, Switches, Bridges,
Firewalls, Repeaters.
OID list for CISCO-ATM-NETWORK-CLOCK-MIB
- cncDistributionMethod
- The method used to distribute network clock for the device. When the mode of operation is 'ncdp', the services provided by the NCDP entity are in use. When this is the case, NCDP entities residing on adjacent nodes exchange protocol messages that are use ...
- cncNotificationOnChange
- The value of this object determines whether a notification should be generated due to a change in the device's root clock source (given by the value of cncRootClockSource). A value of 'true' enables the generation of notifications; 'false' disables notifi ...
- cncNodeStratum
- The stratum at which the device exists in the Synchronous Digital Hierarchy (See American National Standards Institute, ANSI T1.101, 'Synchronization Interface for Digital Networks' and Bell Communications Research, GR-436-CORE, 'Digital Network Synchroni ...
- cncNcdpMaxDiameter
- The maximum possible height of a network clock distribution tree in the network. (Alternatively this is known as the maximum diameter of the network of devices that are participating in NCDP.) If all of the nodes in the network are participating in the ...
- cncNcdpMessageInterval
- The interval at which NCDP configuration PDUs are to be generated. The message interval directly affects the convergence time of the NCDP algorithm. Convergence time is equal to the max network diameter * message interval + transmission delays + the time ...
- cncNcdpHoldTime
- The delay between the transmission of NCDP configuration PDUs. The hold time is used to limit the transmission of NCDP configuration PDUs out of an interface to a maximum of one configuration PDU per hold time interval per interface. The value of this obj ...
- cncSourceChangeReason
- The reason for the most recent change of a source of network clock, as indicated by the change in the value of cncSourceChangeTimeStamp. 'none' indicates that the source of network clock has not changed. 'lossOfLock' indicates that the clock source was ch ...
- cncSourceChangeTimeStamp
- The value of sysUpTime when the most recent change of a source of network clock occurred. A value of 0 indicates that no such event has occurred since the instantiation of this object.
- cncRootClockSource
- The entPhysicalIndex of the network clock source that is actively supplying network clock within the device.
- cncManualSourceTable
- A table of network clock sources available to the managed system.
- cncManualSourceEntry
- Network clock status and statistics for sources of network clock. When the value of cncDistributionMethod is 'manual', the managed system uses this table to select a source of network clock for the managed system. Within this table a physical entity tha ...
- cncManualSourcePriority
- A value used to identify a source of network clock available to the device's manual network clock selection algorithm.
- cncManualSourceId
- The entPhysicalIndex that uniquely identifies a source of network clock within the managed system.
- cncManualSourceHealth
- The health of the clock source identified by cncManualSourceId.
- cncManualRowStatus
- The status of this conceptual row.
- cncNcdpSourceTable
- A table of configured network clock sources available to the managed system for use by the NCDP protocol entity.
- cncNcdpSourceEntry
- Network clock status and statistics for sources of network clock identified by entPhysicalIndex and used by the managed system when the value of cncDistributionMethod is 'ncdp'. A source of network clock for the device may be an oscillator local to the de ...
- cncNcdpBestClockSource
- An indication of whether the NCDP entity is presently advertising this clock source as the best clock source available in this table.
- cncNcdpPriority
- The network-wide priority of this clock source if configured as a source of network clock for NCDP. The highest priority clock source is that clock source having the lowest positive numeric value. The clock source with the highest priority is selected as ...
- cncNcdpStratum
- The stratum level associated with this clock source if configured as a source of network clock for NCDP. (See American National Standards Institute, ANSI T1.101, 'Synchronization Interface for Digital Networks' and Bell Communications Research, GR-436-CO ...
- cncNcdpPRSReference
- An value that identifies the primary reference source that the network clock available from this source is traceable to if configured as a source of network clock for NCDP. (See American National Standards Institute, ANSI T1.101, 'Synchronization Interfac ...
- cncNcdpSourceHealth
- The health of the clock source associated with this row.
- cncNcdpRowStatus
- The status of this conceptual row.
- cncNcdpAtmTable
- A table containing the status of NCDP on the device's ATM interfaces.
- cncNcdpAtmEntry
- An entry in the cncNcdpAtm table containing the status of Ncdp on an ATM interface. A row in this table is created by the managed system and disappears when the associated physical entity disappears. When a row is created all of the row objects are instan ...
- cncNcdpEnable
- An indication of whether NCDP is presently running on an interface. When NCDP is enabled for an interface, the interface is an active member of the clock distribution topology as seen by the NCDP protocol entity. After this object is instantiated by the ...
- cncNcdpAdminWeight
- A weight metric used by the NCDP protocol entity and associated with a physical interface that supports synchronous clock recovery. When NCDP is enabled for the physical interface the value of this object is used by NCDP algorithms during tree computatio ...
- cncNcdpVpi
- The VPI value of the VCC supporting the NCDP entity at this ATM interface. If the values of cncNcdpVpi and cncNcdpVci are both equal to zero then the NCDP entity is not supported at this ATM interface.
- cncNcdpVci
- The VCI value of the VCC supporting the NCDP entity at this ATM interface. If the values of cncNcdpVpi and cncNcdpVci are both equal to zero then the NCDP entity is not supported at this ATM interface.
- cncNcdpHealth
- The health of the clock source associated with this row.
- cncGroup
- The cnc group of objects providing for management of network clock distribution and NCDP entities.
Download IPHost Network Monitor (500 monitors for 30 days, 50 monitors free forever) to start monitoring network devices right now.
