CISCO-ATM-SIG-DIAG-MIB Download

csfFilterControl

This object enables or disables the call failure filtering feature in the ATM device. When this object is modified from 'enable' to 'disable' the records in the csfRecordTable are not removed but filtering is stopped in the device.

csfFilterTable

The table whose entries describe the filtering criteria for recording failed connection setup requests.

csfFilterEntry

Each entry in this table corresponds to a filtering criteria based on which the rejected calls are recorded. This selection criteria is applied against all connection setup failures generated/detected at this ATM device. Only connection setup failures whi ...

csfFilterIndex

An arbitrary integer uniquely identifying a filtering criteria.

csfFilterScope

This object restricts the scope of the filter to calls which where rejected either within the system in which the filtering is in progress or to calls which were rejected on external ATM devices but transited through the device in which filtering is in p ...

csfFilterConnKind

This object enables the user to track failures of soft permanent virtual channel connections, soft permanent virtual path connections, switched virtual channel connections, and/or switched virtual path connections.

csfFilterConnCastType

This object restricts the scope of the filter based on the type of topology of connections (point-to-point or point-to-multipoint).

csfFilterServiceCategory

This object restricts the scope of the filter to calls belonging to service categories represented by this object.

csfFilterInInterface

This object restricts the scope of the filter to calls which entered the ATM device through the port represented by this object It has the value 0, or the ifIndex value of an ATM Interface. The value zero indicates that the scope of the filter is not rest ...

csfFilterOutInterface

This object restricts the scope of the filter to calls which exited the ATM device through the port represented by this object It has the value 0, or the ifIndex value of an ATM Interface. The value zero indicates that the scope of the filter is not restr ...

csfFilterCause

This object restricts the scope of the filter to calls which were cleared with the cause code represented by this object. The values are the same as the clear code values mentioned in the ATM forum UNI specifications.The value zero indicates that the sco ...

csfFilterCallingParty

The combination of this object and the corresponding instance of csfFilterCallingPartyMask is one selection criteria for this record. To match this selection criteria, a failed connection setup must have a Calling Party Address which has the same length ...

csfFilterCallingPartyMask

The combination of this object and the corresponding instance of csfFilterCallingParty is one selection criteria for this record. To match this selection criteria, a failed connection setup must have a Calling Party Address which equals the value of csfF ...

csfFilterCalledParty

The combination of this object and the corresponding instance of csfFilterCalledPartyMask is one selection criteria for this record. To match this selection criteria, a failed connection setup must have a called party address which has the same length as ...

csfFilterCalledPartyMask

The combination of this object and the corresponding instance of csfFilterCalledParty is one selection criteria for this record. To match this selection criteria, a failed connection setup must have a Calling Party Address which equals the value of csfFi ...

csfFilterMaxRecords

The maximum number of entries that are desired in the csfRecordTable on behalf of this entry. The agent will not create more than this number of entries in the table,but may choose to create fewer entries in the csfRecordTable for any reason including the ...

csfFilterAgeTimeout

The number of seconds left for this entry to age out. On expiry of this timer filtering is disabled for this entry. The display records in the csfRecordTable corresponding to this entry are retained. When the timer expires the object will have a value zer ...

csfFilterPurge

The object provides a facility for the user to purge the records in the csfRecordTable corresponding to this entry. When the value is set to 'purge', the records in the csfRecordTable corresponding to this entry are purged. When the value is set to 'noop ...

csfFilterNumMatches

A monotonically increasing counter to keep track of the number of call failures that matched this entry for the entire lifetime of this entry.

csfFilterRowStatus

Indicates the status of this row. Used according to the row installation and removal conventions. This object can be used to temporarily inactivate an entry in the table. When this object is set to a value 'notInService' filtering is stopped for the corre ...

csfRecordTable

The table in which the failures of ATM Signalling connection setup requests are recorded.

csfRecordEntry

An entry representing one connection setup request failure record. The csfRecordFilterIndex represents the index into the csfFilterTable whose entry is the filtering criteria applied against all connection setup failures generated/detected at this ATM de ...

csfRecordIndex

An arbitrary integer used to distinguish between multiple records for the same filtering criteria.

csfRecordScope

This object indicates the location of the call failure.

csfRecordConnKind

This object represents the use of call control of the rejected connection.

csfRecordConnCastType

This object represents the type of topology of the rejected call (point-to-point or point-to-multipoint).

csfRecordConnIndicator

Indicates whether this record was created due to an add party failure or a setup failure.

csfRecordServiceCategory

This object represents the service category used by the call.

csfRecordInInterface

The IfIndex of the incoming port on which this call was received by the ATM device.

csfRecordOutInterface

The IfIndex of the outgoing port ,if available, through which this call was routed to the network. The distinguished value zero indicates that the call was rejected before any outgoing interface was chosen.

csfRecordCause

This object identifies the reason for the call failure. When a PNNI Crankback information element is included in the call clearing message, this object contains the crankback cause. In all other cases, the values are the same as the cause code values def ...

csfRecordDiags

This object contains the contents of the diagnostics fields from the Cause information element. When the value of csfRecordCause is 49,'Quality of Service unavailable', the diagnostics are taken from the PNNI Crankback information element instead of the c ...

csfRecordCallingParty

Indicates the ATM adddress of the calling party in the rejected call.

csfRecordCallingPartySubAddress

Indicates the ATM sub-adddress of the calling party in the rejected call. The presence of a sub address is not mandatory. If the calling sub-addresses is not present in the call then this object will have a null value.

csfRecordCalledParty

Indicates the ATM address of the called party in the rejected call.

csfRecordCalledPartySubAddress

Indicates the ATM sub-adddress of the called party in the rejected call. The presence of a sub address is not mandatory. If the called sub-address is not present in the call then this object will have a null value.

csfRecordCrankBackTransitType

This object identifies the type of blockage in case of a blocked call. This object has a value 'noCrankBack' if the call was cleared without a crankback information element.

csfRecordCrankBackNodeId

This object depends on the csfRecordCrankBackTransitType object. When that object value is 'blockedNode', csfRecordCrankBackNodeId indicates the node ID of the blocked node. When the csfRecordCrankBackTransitType object value is 'blockedLink', this object ...

csfRecordCrankBackPortId

When the csfRecordCrankBackTransitType object value is 'blockedLink', this object identifies a logical port of the blocked link's preceeding node identifier. The distinguished value zero indicates that no port is specified. For all values of csfRecordCra ...

csfRecordCrankBackSucceedingNodeId

This object depends on the csfRecordCrankBackTransitType object. If the csfRecordCrankBackNodeId object value is 'blockedLink' then the value of this object will identify the logical node succeeding a link at which the call/connection was blocked. This ob ...

csfRecordTimeStamp

The time at which this record entry was created.

csfDtlTable

The table in which the Designated Transit List (DTL)stacks (i.e., source routes) of failed calls are recorded. Each DTL identifies a source route through a single peer group. DTL's are represented as a series of logical Node IDs and logical Port IDs.

csfDtlEntry

A segment of the DTL stack. The complete DTL stack is formed by traversing the rows of the table for which the csfFilterIndex and csfRecordIndex are the same. Level transitions are indicated using the csfDtlLinkType. Since the entries in the table are lin ...

csfDtlEntryIndex

The index in the current DTL stack of this entry. This index represents the the order of this entry in the DTL stack.

csfDtlNodeId

Each entry in the DTL table corresponds to a node/port tuple based on which a source route through the peer group is built. This object represents the node id in the tuple

csfDtlPortId

Each entry in the DTL table corresponds to a node/port tuple based on which a source route through the peer group is built. This object represents the port id in the tuple

csfDtlLinkType

The type of link out from the node identified by csfDtlNodeId. This is well defined even if the specific port is not specified. A value 'horizontal' indicates a normal link within the containing peer group. A value 'uplink' indicates a link going up a lev ...

ciscoSigFailGeneralGroup

A collection of objects which help in diagnosing ATM signalling failures.

ciscoSigFailMIBGroup

A collection of objects which help in diagnosing ATM signalling failures.