The objects described here can be monitored with the IPHost Network Monitor.
You can start SNMP monitoring using free 30-day trial version of IPHost right now.
OID list for board status
- Sys Slot Board Status
- a3ComSysSlotBoardStatus 1.3.6.1.4.1.43.29.4.2.2.1.4 (defined in A3COM-SWITCHING-SYSTEMS-MIB)
The status of the board in the slot identified by this entry. - Compaq CR3500 RAID Controller EMU Board Temperature Status
- cpqCrEMUBoardTemperatureStatus 1.3.6.1.4.1.232.141.2.7.1 (defined in CPQCR)
Environmental Monitoring Unit (EMU) Board Temperature status. The System Board Temperature status as determined by the EMU is: Not Installed (2) The board temperature can not be detected in the unit. Normal (3) The board temperature detected by the EMU is normal. Below Normal (4) The board temperature detected by the EMU is below normal. Above Normal (5) The board temperature detected by the EMU is above normal. Far Below Normal (6) The board temperature detected by the EMU is far below normal. Far Above Normal (7) The board temperature detected by the EMU is far above normal. Back To Normal (8) The board temperature detected by the EMU has returned to normal. - Compaq Drive Array Controller Board Status
- cpqDaCntlrBoardStatus 1.3.6.1.4.1.232.3.2.2.1.1.10 (defined in CPQIDA)
Compaq Array Controller Board Status. The following values are valid: other (1) Indicates that the instrument agent does not recognize the status of the controller. You may need to upgrade the instrument agent. ok (2) The array controller is operating properly. generalFailure (3) The array controller is failed. cableProblem (4) The array controller has a cable problem. Please check all cable connections to this controller. poweredOff (5) The array controller is powered off. Please replace the controller and restore power to the slot. - Compaq Drive Array Controller Partner Board Status
- cpqDaCntlrPartnerBoardStatus 1.3.6.1.4.1.232.3.2.2.1.1.11 (defined in CPQIDA)
Compaq Array Controller Partner Board Status. The following values are valid: other (1) Indicates that the instrument agent does not recognize the status of the controller. You may need to upgrade the instrument agent. ok (2) The partner array controller is operating properly. generalFailure (3) The partner array controller is the failed. cableProblem (4) The partner array controller has a cable problem. Please check all cable connections to this controller. poweredOff (5) The array controller is powered off. Please replace the controller and restore power to the slot. - cmm Board Admin Status
- cmmBoardAdminStatus 1.3.6.1.4.1.52.4.1.1.18.1.1.1.24 (defined in ct-cmmphys-mib)
The value of this object is the administrative status of the CMM board. down(1) -- all modems that belong to this board are to be removed from service immediately leave-service(2) -- each modem that belongs to this board is to be removed from service at the completion of its current call, if any up(3) -- each modem that belongs to this module is to become available for accepting calls upgrade(4) -- all modules that belong to this board are to be reloaded with new software and restarted - cmm Board Operation Status
- cmmBoardOperStatus 1.3.6.1.4.1.52.4.1.1.18.1.1.1.25 (defined in ct-cmmphys-mib)
The value of this object is the operational status of the CMM board. initializing(1) -- all modules that belong to this board are booting up or in the process of a software upgrade active(2) -- all modules that belong to this board are available for accepting calls leaving-service(3) -- all modules that belong to this board are functional but are no longer available for accepting calls (Existing calls are allowed to terminate normally.) out-of-service(4) -- none of the modules that belong to this board are available for accepting calls nor do they have any existing calls faulty(5) -- all modules that belong to this board are unusable impaired(6) -- the board is otherwise active but one or more modules are in the out-of-service, initializing, testing, faulty, or impaired states
