The objects described here can be monitored with the IPHost Network Monitor.
You can start SNMP monitoring using free 30-day trial version of IPHost right now.
OID list for errored seconds
- access Switch Vdsl Vtuo Performance Current 1 Day Errored Seconds
- accessSwitchVdslVtuoPerfCurr1DayESs 1.3.6.1.4.1.890.1.5.12.1.1.1.6.1.21 (defined in ZYXEL-VDSLLINE-MIB)
Count of Errored Seconds during the mandatory day as measured by accessSwitchVdslVtuoPerfCurr1DayTimeElapsed. The errored second parameter is a count of one-second intervals containing one or more crc anomalies, or one or more los or sef defects. - access Switch Vdsl VTU-R Performance Current 15 Minimum Errored Seconds
- accessSwitchVdslVturPerfCurr15MinESs 1.3.6.1.4.1.890.1.5.12.1.1.1.7.1.11 (defined in ZYXEL-VDSLLINE-MIB)
Count of Errored Seconds in the mandatory 15 minute interval. The errored second parameter is a count of one-second intervals containing one or more crc anomalies, or one or more los or sef defects. - access Switch Vdsl VTU-R Performance Prev1 Day Errored Seconds
- accessSwitchVdslVturPerfPrev1DayESs 1.3.6.1.4.1.890.1.5.12.1.1.1.7.1.21 (defined in ZYXEL-VDSLLINE-MIB)
Count of Errored Seconds within the most recent previous 1-day period. The errored second parameter is a count of one-second intervals containing one or more crc anomalies, or one or more los or sef defects. - access Switch Vdsl Vtuo Interval Errored Seconds
- accessSwitchVdslVtuoIntervalESs 1.3.6.1.4.1.890.1.5.12.1.1.1.8.1.6 (defined in ZYXEL-VDSLLINE-MIB)
Count of Errored Seconds in the interval. The errored second parameter is a count of one-second intervals containing one or more crc anomalies, or one or more los or sef defects. - Cisco 90i Net PPP Errored Seconds
- frxNetPPPEs 1.3.6.1.4.1.1570.1.4.1.1.15 (defined in CISCO-90-MIB)
Errored seconds caused by bad RFC-1973 (PPP) header. Total number of seconds in which a frame with an invalid RFC-1973 (PPP) header is received by this channel unit on the network (T1) interface. Only frames whose DLCI is addressed to a port that is set to PPP protocol and is on this channel unit are counted. - Cisco 90i Net Buffer Errored Seconds
- frxNetBufEs 1.3.6.1.4.1.1570.1.4.1.1.16 (defined in CISCO-90-MIB)
Errored Seconds caused by Buffer Overflow. Total number of seconds in which a frame received by this channel unit on the network (T1) interface was discarded due to insufficient buffer space. Only frames whose DLCI is addressed to a port on this channel unit are counted. - Cisco 90i DSLCRC Errored Seconds
- frxDSLCRCEs 1.3.6.1.4.1.1570.1.6.1.1.13 (defined in CISCO-90-MIB)
Subscriber port Errored Seconds caused by CRC errors. Total number of seconds in which a frame with a CRC error is received from this port. - Cisco 90i Cd Errored Seconds Th
- frxCdEsTh 1.3.6.1.4.1.1570.1.6.4.1.3 (defined in CISCO-90-MIB)
Current Day Errored Seconds threshold. This threshold is used for both the transmit and receive directions. When errors are detected that exceed this threshold and the corresponding bit in the frxAlertMask register is 0, the corresponding bit in the frxThCond register is set and a trap is generated (depending on the state of frxUPerfTrapEnable). Factory defaut is 100. Indexed by Bank.ChannelUnit.Port.Address - Cisco 90i H2 Errored Seconds Rx
- frxH2EsRx 1.3.6.1.4.1.1570.1.6.5.1.8 (defined in CISCO-90-MIB)
Errored Seconds 2 hours ago - Receive direction. Receive is data from the customer towards the network. Errored Seconds are seconds in which one or more block errors occur. These errors are measured at the physical link level (e.g. DSL CRC or BPV errors) and not at the frame relay level. This register is defined by Bellcore TR-TSY-000829. Indexed by Bank.ChannelUnit.Port.Address - Cisco 90i H5 Errored Seconds Tx
- frxH5EsTx 1.3.6.1.4.1.1570.1.6.5.1.13 (defined in CISCO-90-MIB)
Errored Seconds 5 hours ago - Transmit direction. Transmit is data from the network towards the customer. Errored Seconds are seconds in which one or more block errors occur. These errors are measured at the physical link level (e.g. DSL CRC or BPV errors) and not at the frame relay level. This register is defined by Bellcore TR-TSY-000829. Indexed by Bank.ChannelUnit.Port.Address (note: DDS loops cannot detect transmit errors) - Cisco 90i Cd Errored Seconds Rx
- frxCdEsRx 1.3.6.1.4.1.1570.1.6.5.1.22 (defined in CISCO-90-MIB)
Current Day Errored Seconds - Receive direction. Receive is data from the customer towards the network. Errored Seconds are seconds in which one or more block errors occur. These errors are measured at the physical link level (e.g. DSL CRC or BPV errors) and not at the frame relay level. This register is defined by Bellcore TR-TSY-000829. Indexed by Bank.ChannelUnit.Port.Address - rpr Span Error Current Errored Seconds
- rprSpanErrorCurrentErroredSeconds 1.0.8802.17.1.1.1.5.1.1.14 (defined in IEEE-802DOT17-RPR-MIB)
The number of errored seconds. - rpr Span Error Interval Errored Seconds
- rprSpanErrorIntervalErroredSeconds 1.0.8802.17.1.1.1.5.2.1.17 (defined in IEEE-802DOT17-RPR-MIB)
The number of errored seconds. - rpr Span Error Interval Severely Errored Seconds
- rprSpanErrorIntervalSeverelyErroredSeconds 1.0.8802.17.1.1.1.5.2.1.18 (defined in IEEE-802DOT17-RPR-MIB)
The number of severely errored seconds. - Cisco Wireless Pct Errored Seconds
- cwrPctErroredSeconds 1.3.6.1.4.1.9.9.136.1.6.2.1.5 (defined in CISCO-WIRELESS-IF-MIB)
This object represents the ratio of cumulative Codeword Errored Seconds (ES) to Link Admin Up seconds, expressed as a percentage. - cwr24 Hr Errored Seconds
- cwr24HrErroredSeconds 1.3.6.1.4.1.9.9.136.1.6.3.1.4 (defined in CISCO-WIRELESS-IF-MIB)
This object represents the number of Codeword Error Seconds (ES) detected since link power up, captured at cwr24HrUpdateTime. - cwr1 Hr Errored Seconds
- cwr1HrErroredSeconds 1.3.6.1.4.1.9.9.136.1.6.4.1.4 (defined in CISCO-WIRELESS-IF-MIB)
This object represents the cumulative Codeword Errored Seconds (ES) detected since link power up, captured at cwr1HrUpdateTime. - cwr1 Minimum Errored Seconds
- cwr1MinErroredSeconds 1.3.6.1.4.1.9.9.136.1.6.5.1.4 (defined in CISCO-WIRELESS-IF-MIB)
This object represents the cumulative Codeword Errored Seconds (ES) detected since link power up, captured at cwr1MinUpdateTime. - p2mp Su1 Min Errored Seconds
- p2mpSu1MinErroredSeconds 1.3.6.1.4.1.9.9.181.2.3.1.7 (defined in CISCO-WIRELESS-P2MP-LINK-METRICS-MIB)
This object represents the cumulative Codeword Errored Seconds (ES) detected from the last Link Admin Up time until the current operational second. - p2mp Su1 Hr Errored Seconds
- p2mpSu1HrErroredSeconds 1.3.6.1.4.1.9.9.181.2.4.1.7 (defined in CISCO-WIRELESS-P2MP-LINK-METRICS-MIB)
This object represents the cumulative Codeword Errored Seconds (ES) detected from the last Link Admin Up time until the current operational hour - p2mp Su Pct Errored Seconds
- p2mpSuPctErroredSeconds 1.3.6.1.4.1.9.9.181.2.6.1.6 (defined in CISCO-WIRELESS-P2MP-LINK-METRICS-MIB)
This object represents the ratio of cumulative Codeword Errored Seconds (ES) to Link Admin Up seconds, expressed as a percentage.
