The objects described here can be monitored with the IPHost Network Monitor.
You can start SNMP monitoring using free 30-day trial version of IPHost right now.
OID list for if operation
- ipx If Operation State
- ipxIfOperState 1.3.6.1.4.1.311.1.8.2.1.1.3 (defined in MSIPX-MIB)
If ipxIfAdminState is disabled(1) then ipxIfOperState should be down(1). If ipxIfAdminState is changed to enabled(2) then ipxIfOperState should change to up(2) if the interface is ready to transmit and receive network traffic; it should change to sleeping(3) if the interface is waiting for external actions (such as a serial line waiting for an incomming connection); it should remain in the down(1) state if and only if there is a fault that prevents it from going to the up(2) state. - rip If Operation State
- ripIfOperState 1.3.6.1.4.1.311.1.9.2.1.1.3 (defined in MSRIPSAP-MIB)
If ripIfAdminState is disabled(1) then ripIfOperState should be down(1). If ripIfAdminState is changed to enabled(2) then ripIfOperState should change to up(2) if the interface is ready to transmit and receive network traffic; it should change to sleeping(3) if the interface is waiting for external actions (such as a serial line waiting for an incomming connection); it should remain in the down(1) state if and only if there is a fault that prevents it from going to the up(2) state. - sap If Operation State
- sapIfOperState 1.3.6.1.4.1.311.1.9.2.2.1.3 (defined in MSRIPSAP-MIB)
If sapIfAdminState is disabled(1) then ripIfOperState should be down(1). If sapIfAdminState is changed to enabled(2) then sapIfOperState should change to up(2) if the interface is ready to transmit and receive network traffic; it should change to sleeping(3) if the interface is waiting for external actions (such as a serial line waiting for an incomming connection); it should remain in the down(1) state if and only if there is a fault that prevents it from going to the up(2) state. - m013 IP Router If Operation Status
- m013IPRouterIfOperStatus 1.3.6.1.4.1.800.2.25.9.1.1.8 (defined in XYLAN-M013-MIB)
Provide operating status of a particular router envirnment. - ipv6 If Operation Status
- ipv6IfOperStatus 1.3.6.1.2.1.55.1.5.1.10 (defined in IPV6-MIB)
The current operational state of the interface. The noIfIdentifier(3) state indicates that no valid Interface Identifier is assigned to the interface. This state usually indicates that the link-local interface address failed Duplicate Address Detection. If ipv6IfAdminStatus is down(2) then ipv6IfOperStatus should be down(2). If ipv6IfAdminStatus is changed to up(1) then ipv6IfOperStatus should change to up(1) if the interface is ready to transmit and receive network traffic; it should remain in the down(2) or noIfIdentifier(3) state if and only if there is a fault that prevents it from going to the up(1) state; it should remain in the notPresent(5) state if the interface has missing (typically, lower layer) components. - if Operation Status
- ifOperStatus 1.3.6.1.2.1.2.2.1.8 (defined in rfc1213)
The current operational state of the interface. The testing(3) state indicates that no operational packets can be passed. - if Operation Status
- ifOperStatus 1.3.6.1.2.1.2.2.1.8 (defined in rfc1573)
The current operational state of the interface. The testing(3) state indicates that no operational packets can be passed. If ifAdminStatus is down(2) then ifOperStatus should be down(2). If ifAdminStatus is changed to up(1) then ifOperStatus should change to up(1) if the interface is ready to transmit and receive network traffic; it should change to dormant(5) if the interface is waiting for external actions (such as a serial line waiting for an incomming connection); it should remain in the down(2) state if and only if there is a fault that prevents if from going to the up(1) state. - Network AppleTalk Forward If Operation STATUS
- nwAtFwdIfOperSTATUS 1.3.6.1.4.1.52.4.2.2.2.3.4.2.2.2.1.1.1.3 (defined in ctron-appletalk-router-mib)
Indicates the current operating condition of AppleTalk Routing Services on the AppleTalk router port for which the entry exists. The value of nwAtFwdIfOperStatus indicates any problem with the configuration of AppleTalk Routing Services on the router port. A value of 6 indicates that regardless of the state of nwAtFwdIfAdminStatus AppleTalk Routing Services is not operating because of an invalid port-level configuration. - Network AppleTalk Protocol If Operation STATUS
- nwAtProtoIfOperSTATUS 1.3.6.1.4.1.52.4.2.2.2.3.4.2.4.1.1.2.1.1.1.3 (defined in ctron-appletalk-router-mib)
Indicates the current operating condition of the AppleTalk routing protocol on the router port for which the entry exists. The value of nwAtProtoIfOperStatus indicates any problem with your AppleTalk routing protocol configuration on the router port. A value of 6 indicates that regardless of the value of nwAtProtoIfAdminStatus, the routing protocol is not operating on the router port because of an invalid configuration. - Network Appn Forward If Operation Status
- nwAppnFwdIfOperStatus 1.3.6.1.4.1.52.4.2.2.2.3.5.2.2.2.1.1.1.3 (defined in ctron-appn-mib)
Indicates the current operating condition of the APPN Routing Services port for which the entry exists. - Network DECnet IV Forward If Operation Status
- nwDecIVFwdIfOperStatus 1.3.6.1.4.1.52.4.2.2.2.3.3.2.2.2.1.1.1.3 (defined in ctron-deciv-router-mib)
Indicates the current operating condition of DECnet Phase IV Routing Services on the router port for which the entry exists. The value of nwDecIVFwdIfOperStatus indicates any problem with the configuration of DECnet Phase IV Routing Services on the router port. value of 6 indicates that regardless of the value of nwDecIVFwdIfAdminStatus, DECnet Phase IV Routing Services is not operating because of an invalid port-level configuration. - Network DECnet IV Protocol If Operation Status
- nwDecIVProtoIfOperStatus 1.3.6.1.4.1.52.4.2.2.2.3.3.2.4.1.1.2.1.1.1.3 (defined in ctron-deciv-router-mib)
Indicates the current operating condition of the DECnet Phase IV distance-vector-based routing protocol on the router port for which the entry exists. The value of nwDecIVProtoIfOperStatus indicates any problem with your routing protocol configuration on the router port. A value of 6 indicates that regardless of the value of nwDecIVProtoIfAdminStatus, the routing protocol is not operating because of an invalid configuration. - Cabletron Dhcp If Operation Status
- ctDhcpIfOperStatus 1.3.6.1.4.1.52.4.2.2.2.3.1.2.12.2.2.1.1.3 (defined in ctron-dhcp-mib)
Indicates the current operating status of the DHCP server function on this interface. - Network Ip Forward If Operation Status
- nwIpFwdIfOperStatus 1.3.6.1.4.1.52.4.2.2.2.3.1.2.2.2.1.1.1.3 (defined in ctron-ip-router-mib)
Indicates the current operating condition of IP Routing Services on the router port for which the entry exists. The value of nwIpFwdIfOperStatus indicates any problem with the configuration of IP routing Services on the router port. A value of 6 indicates that regardless of the value of nwIpFwdIfAdminStatus, IP Routing Services is not operating because of an invalid port-level configuration. - Network Ip Rip If Operation Status
- nwIpRipIfOperStatus 1.3.6.1.4.1.52.4.2.2.2.3.1.2.4.1.1.2.1.1.1.3 (defined in ctron-ip-router-mib)
Indicates the current operating condition of the RIP routing protocol on the router port for which the entry exists. The value of nwIpRipIfOperStatus indicates any problem with your RIP configuration on the router port. A value of 6 indicates that regardless of the value of nwIpRipIfAdminStatus, RIP is not operating on the port because of an invalid configuration. - Network Ipx Net BIOS If Operation Status
- nwIpxNetBIOSIfOperStatus 1.3.6.1.4.1.52.4.2.2.2.3.2.2.9.1.2.1.1.1.3 (defined in ctron-ipx-router-mib)
Indicates the current operating condition of IPX NetBIOS broadcasting on the IPX router port for which the entry exists. - Network Ipx Broadcast If Operation Status
- nwIpxBcastIfOperStatus 1.3.6.1.4.1.52.4.2.2.2.3.2.2.9.2.2.1.1.1.3 (defined in ctron-ipx-router-mib)
Indicates the current operating condition of the IPX Broadcast on the router port for which the entry exists. - Network Routing Protocol If Operation Status
- nwRtgProtocolIfOperStatus 1.3.6.1.4.1.52.4.2.2.2.2.2.2.1.1.5 (defined in ctron-routers-mib)
Indicates the current operating condition of the routing protocol on this router port for which the entry exists. - Network Component If Operation Status
- nwComponentIfOperStatus 1.3.6.1.4.1.52.4.2.2.2.2.3.2.1.1.5 (defined in ctron-routers-mib)
Indicates the current operating condition of the components on the router port for which the entry exists. - Enterasys Dvmrp Ext If If Operation Status
- etsysDvmrpExtIfIfOperStatus 1.3.6.1.4.1.5624.1.2.69.1.2.1.1.2 (defined in enterasys-dvmrp-ext-mib)
The current operational state of DVMRP on this interface. - Enterasys If Operation State Link Change
- etsysIfOperStateLinkChange 1.3.6.1.4.1.5624.1.2.57.1.1.1 (defined in enterasys-if-mib-ext-mib)
This object controls the system wide ability to manipulate the physical link state of an interface when the interface's ifOperStatus transitions into or out of the down(2) state. A value of enabled(1) will cause an interface to drop physical link when its ifOperStatus transitions to down(2). If the interface would transition out of the down(2) state, assuming it did have link, then physical link will be restored to the interface. A value of disabled(2) will cause an interface to not alter its physical link regardless of the value of ifOperStatus. This object only affects those interfaces which have a concept of physical link. - Enterasys If Mib Ext Operation Link Group
- etsysIfMibExtOperLinkGroup 1.3.6.1.4.1.5624.1.2.57.2.1.1 (defined in enterasys-if-mib-ext-mib)
The group that controls physical link manipulation as a result of ifOperStatus changes. - Enterasys Ospf Ext If Operation Status
- etsysOspfExtIfOperStatus 1.3.6.1.4.1.5624.1.2.65.1.2.2.1.1 (defined in enterasys-ospf-ext-mib)
The current operational state of OSPF on this interface. - Enterasys Ospf Ext Virtual If Operation Status
- etsysOspfExtVirtIfOperStatus 1.3.6.1.4.1.5624.1.2.65.1.2.3.1.2 (defined in enterasys-ospf-ext-mib)
The current operational state of OSPF on this virtual interface. - Enterasys Pim Ext If Operation Status
- etsysPimExtIfOperStatus 1.3.6.1.4.1.5624.1.2.67.1.2.1.1.2 (defined in enterasys-pim-ext-mib)
The current operational state of PIM on this interface. - bsn AP If Operation Status
- bsnAPIfOperStatus 1.3.6.1.4.1.14179.2.2.2.1.12 (defined in AIRESPACE-WIRELESS-MIB)
Operational status of the interface. - bsn AP If Mac Operation Parameter Entry
- bsnAPIfMacOperationParamEntry 1.3.6.1.4.1.14179.2.2.5.1 (defined in AIRESPACE-WIRELESS-MIB)
An entry in the bsnAPIfMacOperationParamEntry Table. Interface tables in this MIB module are indexed by bsnAPDot3MacAddress, bsnAPIfSlotId. - Cisco Access Control List QoS If Operation Trust State
- caqIfOperTrustState 1.3.6.1.4.1.9.9.179.1.2.1.1.5 (defined in CISCO-CATOS-ACL-QOS-MIB)
This object is used to indicate the operational trust state of an interface. The operational trust state may or may not be identical to the config trust state denoted by caqIfTrustStateConfig. The value of this object depends on the runtime conditions such as whether the interface is configured to trust a certain type of device as denoted by caqIfTrustDevice as well as whether a device of the trusted type is connected to the interface. For example, if the interface is configured to only trust Cisco IP Phone and the phone is not connected to the interface at runtime, the operational trust state of this interface will have the untrusted(1) value even if the trustCoS(2) value is configured in caqIfTrustStateConfig. This object is only instantiated if the platform supports trust device configuration. If the object is untrusted(1), then the DSCP assigned to the packet is the DSCP specified by classification rule obtained from the matching ACE (Access Control Entry). ACE is a filter that is used to identify flows with certain characteristics. It includes fields such as ingress/egress ports, L2 addresses, L3 addresses , TCP/UDP port number. If this object is trustCoS(2), then the DSCP assigned to the packet is the layer2 CoS of the packet mapped to a DSCP by the CoS-to-DSCP mapping defined in object caqCosToDscpDscp. When this object is trustIpPrec(3), a DSCP is assigned to an IP packet according to the IP-Precedence-to-DSCP mapping defined by the values contained in caqIpPrecToDscpTable. For non-IP packets, trustIpPrec(3) has identical behavior as trustCoS(2). When this object is trustDscp(4), the DSCP contained in an IP packet is trusted as being the correct value to assign to it. For non-IP packets, trustDscp(4) has identical behavior as trustCoS(2). - Cisco Fibre Element If Operation Status Cause
- fcIfOperStatusCause 1.3.6.1.4.1.9.9.289.1.1.2.1.7 (defined in CISCO-FC-FE-MIB)
The cause of current operational state of the port. The current operational state of the port is shown by the 'ifOperStatus' defined in IF-MIB. This object will show 'none(2)' for all the 'ifOperStatus' values except for 'down(2)'. It will show one of the values from the 'FcIfOperStatusReason' textual convention if 'ifOperStatus' is 'down(2)'. It will show other(1) if the operational status cause is not from one defined in 'FcIfOperStatusReason'. This object will also be an additional varbind sent in the linkDown notification ( defined in IF-MIB ) in addition to the varbinds defined for this notification. - Cisco Fibre Element Trunk If Operation Status Cause
- fcTrunkIfOperStatusCause 1.3.6.1.4.1.9.9.289.1.1.3.1.2 (defined in CISCO-FC-FE-MIB)
The cause of current operational state of the port. The current operational state of the port is shown by the 'fcTrunkIfOperStatus'. This object will show 'none(2)' for all the 'fcTrunkIfOperStatus' values except for 'down(2)'. It will show one of the values from the 'FcIfOperStatusReason' textual convention if 'fcTrunkIfOperStatus' is 'down(2)'. - Cisco Fibre Element If Module Bandwidth Fairness Operation
- fcIfModuleBandwidthFairnessOper 1.3.6.1.4.1.9.9.289.1.1.15.1.3 (defined in CISCO-FC-FE-MIB)
The operational status of bandwidth fairness on the module. enabled(1) - Bandwidth fairness is enabled on the module disabled(2) - Bandwidth fairness is disabled on the module - if Operation Status
- ifOperStatus 1.3.6.1.2.1.2.2.1.8 (defined in ibm_mainframe-Ifmib)
The current operational state of the interface. The testing(3) state indicates that no operational packets can be passed. If ifAdminStatus is down(2) then ifOperStatus should be down(2). If ifAdminStatus is changed to up(1) then ifOperStatus should change to up(1) if the interface is ready to transmit and receive network traffic; it should change to dormant(5) if the interface is waiting for external actions (such as a serial line waiting for an incoming connection); it should remain in the down(2) state if and only if there is a fault that prevents if from going to the up(1) state; it should remain in the notPresent(6) state if the interface has missing (typically, hardware) components. - ipv6 If Operation Status
- ipv6IfOperStatus 1.3.6.1.2.1.55.1.5.1.10 (defined in ibm-ipv6)
The current operational state of the interface. The noIfIdentifier(3) state indicates that no valid Interface Identifier is assigned to the interface. This state usually indicates that the link-local interface address failed Duplicate Address Detection. If ipv6IfAdminStatus is down(2) then ipv6IfOperStatus should be down(2). If ipv6IfAdminStatus is changed to up(1) then ipv6IfOperStatus should change to up(1) if the interface is ready to transmit and receive network traffic; it should remain in the down(2) or noIfIdentifier(3) state if and only if there is a fault that prevents it from going to the up(1) state; it should remain in the notPresent(5) state if the interface has missing (typically, lower layer) components. - Switch L3 Vrrp Operation If Index
- swL3VrrpOperIfIndex 1.3.6.1.4.1.171.11.70.5.3.14.1.1.1 (defined in DES3528-SWL3MGMT-MIB)
The ifIndex value of the interface for which VRRP is enabled. - Switch L3 Vrrp Operation If Index
- swL3VrrpOperIfIndex 1.3.6.1.4.1.171.11.70.5.3.14.1.1.1 (defined in DES3612-SWL3MGMT-MIB)
The ifIndex value of the interface for which Vrrp is enabled. - Switch L3 Vrrp Operation If Index
- swL3VrrpOperIfIndex 1.3.6.1.4.1.171.11.70.5.3.14.1.1.1 (defined in DES3650-SWL3MGMT-MIB)
The ifIndex value of the interface for which Vrrp is enabled.
