The objects described here can be monitored with the IPHost Network Monitor.
You can start SNMP monitoring using free 30-day trial version of IPHost right now.
OID list for port alarm
- dsx1 Port Config Yel Alarm Detect Enable
- dsx1PortConfigYelAlarmDetectEnable 1.3.6.1.4.1.800.2.11.1.1.1.6 (defined in XYLAN-DS1-MIB)
This object indicates whether Yellow Alarm should be detected. - dsx1 Port Statistics Red Alarm Event
- dsx1PortStatsRedAlarmEvent 1.3.6.1.4.1.800.2.11.1.2.1.5 (defined in XYLAN-DS1-MIB)
Total number of Red Alarm events that have been detected on this port. - dsx1 Port Statistics Yellow Alarm Event
- dsx1PortStatsYellowAlarmEvent 1.3.6.1.4.1.800.2.11.1.2.1.6 (defined in XYLAN-DS1-MIB)
Total number of Yellow Alarm events that have been detected on this port. This object applies to T1 port only. - dsx1 Port Statistics Squelch Alarm Event
- dsx1PortStatsSquelchAlarmEvent 1.3.6.1.4.1.800.2.11.1.2.1.7 (defined in XYLAN-DS1-MIB)
Total number of Squelch Alarm events that have been detected on this port. - dsx1 Port Statistics Remote Frame Alarm
- dsx1PortStatsRemFrameAlarm 1.3.6.1.4.1.800.2.11.1.2.1.13 (defined in XYLAN-DS1-MIB)
Total number of Remote Frame Alarm events that have been detected on this port. This object only applies to E1 port. - dsx1 Port Statistics Remote Multi Frame Alarm
- dsx1PortStatsRemMultiFrameAlarm 1.3.6.1.4.1.800.2.11.1.2.1.14 (defined in XYLAN-DS1-MIB)
Total number of Remote MultifFame Alarm events that have been detected on this port. This object only applies to E1 port. - dsx3 Port Statistics Red Alarm Event
- dsx3PortStatsRedAlarmEvent 1.3.6.1.4.1.800.2.11.2.2.1.6 (defined in XYLAN-DS3-MIB)
Total number of Red Alarm events that have been detected on this port. This object only applies to DS3 interface. - dsx3 Port Statistics Plcp Yellow Alarm
- dsx3PortStatsPlcpYellowAlarm 1.3.6.1.4.1.800.2.11.2.2.1.16 (defined in XYLAN-DS3-MIB)
Total number of PLCP Yellow Alarms that have been detected on this port. A value of zero is returned if port sublayer is not PLCP. - dsx3 Port Interval Red Alarm Event
- dsx3PortIntervalRedAlarmEvent 1.3.6.1.4.1.800.2.11.2.3.1.8 (defined in XYLAN-DS3-MIB)
Total number of Red Alarm events that have been detected on this port since it's cleared by the managing station. This object only applies to DS3 interface. - dsx3 Port Interval Plcp Yellow Alarm
- dsx3PortIntervalPlcpYellowAlarm 1.3.6.1.4.1.800.2.11.2.3.1.18 (defined in XYLAN-DS3-MIB)
Total number of PLCP Yellow Alarms that have been detected detected on this port since it's cleared by the managing station. A value of zero is returned if port sublayer is not PLCP. - fault Current Alarm Port Number
- faultCurrentAlarmPortNumber 1.3.6.1.4.1.43.1.12.3.1.1.6.3.1.6 (defined in 3comab9300)
The port number of the card which caused the alarm. - fault History Alarm Port Number
- faultHistoryAlarmPortNumber 1.3.6.1.4.1.43.1.12.3.1.1.6.4.1.6 (defined in 3comab9300)
Port number of the card which caused the alarm. - alarm Port Number
- alarmPortNumber 1.3.6.1.4.1.43.1.12.3.1.1.6.5.4 (defined in C-PRODUCT-TRAP-MIB)
Port number of the card which caused an alarm. - snmp Fddi PORT Link Error Rate Alarm
- snmpFddiPORTLerAlarm 1.3.6.1.2.1.10.15.4.2.1.19 (defined in rfc1285)
The link error rate estimate at which a link connection will generate an alarm. It ranges from 10**-4 to 10**-15 and is reported as the absolute value of the exponent of the estimate. - fddimib PORT Link Error Rate Alarm
- fddimibPORTLerAlarm 1.3.6.1.2.1.10.15.73.5.2.1.19 (defined in rfc1512)
The link error rate estimate at which a link connection will generate an alarm. It ranges from 10**-4 to 10**-15 and is reported as the absolute value of the base 10 logarithm of the estimate (default of 8). - bdg Port Frame Alarm Error
- bdgPortFrAlErr 1.3.6.1.4.1.173.7.9.1.2.16 (defined in ctron-bdg-mib)
The number of errors due to misaligned packets. - Repeater Port Group Alarm Traffic Threshold
- rptrPortGrpAlarmTrafThreshold 1.3.6.1.4.1.52.4.1.1.1.4.2.3.1.3 (defined in repeater-rev4-mib)
The maximum number of packets that will be allowed before an alarm is generated. - Repeater Port Alarm Table
- rptrPortAlarmTable 1.3.6.1.4.1.52.4.1.1.1.4.3.3 (defined in repeater-rev4-mib)
A list of port alarm objects for this repeater node. - Repeater Port Alarm Entry
- rptrPortAlarmEntry 1.3.6.1.4.1.52.4.1.1.1.4.3.3.1 (defined in repeater-rev4-mib)
An entry containing objects pertaining to port alarm objects for a port group. - Repeater Port Alarm Port Id
- rptrPortAlarmPortId 1.3.6.1.4.1.52.4.1.1.1.4.3.3.1.1 (defined in repeater-rev4-mib)
Returns an index to a port for which the information in this table pertains. - Repeater Port Alarm Traffic Enable
- rptrPortAlarmTrafEnable 1.3.6.1.4.1.52.4.1.1.1.4.3.3.1.3 (defined in repeater-rev4-mib)
Get returns whether traffic alarms are enabled/disabled. Set allows for enabling/disabling of traffic alarms. - Repeater Port Alarm Traffic Port Disable
- rptrPortAlarmTrafPortDisable 1.3.6.1.4.1.52.4.1.1.1.4.3.3.1.5 (defined in repeater-rev4-mib)
Set will permit a port to be disabled on a traffic alarm condition. Get will show whether the port disabling is allowed or not. - Repeater Port Alarm Error Threshold
- rptrPortAlarmErrThreshold 1.3.6.1.4.1.52.4.1.1.1.4.3.3.1.10 (defined in repeater-rev4-mib)
Get/Set the percentage of errors per good packet within the timebase that will cause an alarm. - Repeater Port Alarm Error Source
- rptrPortAlarmErrSource 1.3.6.1.4.1.52.4.1.1.1.4.3.3.1.11 (defined in repeater-rev4-mib)
Get/Set a bit encoded map of which errors to include in the error sum, as follows: CRC_errors - Bit 0 - Least Significant Bit runts - Bit 1 OOW_colls - Bit 2 align_errs - Bit 3 undefined - Bit 4 Giants - Bit 5 - Repeater Port Alarm Broad Enable
- rptrPortAlarmBroadEnable 1.3.6.1.4.1.52.4.1.1.1.4.3.3.1.13 (defined in repeater-rev4-mib)
Get returns whether broadcast alarms are enabled/disabled. Set allows for enabling/disabling of broadcast alarms. - Cisco 2900 Port Broadcast Storm Alarm
- c2900PortBroadcastStormAlarm 1.3.6.1.4.1.9.9.87.1.4.1.1.27 (defined in CISCO-C2900-MIB)
When set to true(1), the switch will generate a broadcastStorm notification upon detecting a port is receiving broadcast packets at a rate higher than or equal to the threshold specified by c2900PortBroadcastRisingThreshold. When set to false(2), no such trap will be issued. Default value: false(2). c2900PortBroadcastStormAlarm is defined for each port.
