The objects described here can be monitored with the IPHost Network Monitor.
You can start SNMP monitoring using free 30-day trial version of IPHost right now.
OID list for port device
- Host Resources Device Parallel Port
- hrDeviceParallelPort 1.3.6.1.2.1.25.3.1.15 (defined in HOST-RESOURCES-TYPES)
The device type identifier used for a parallel port. - Host Resources Device Serial Port
- hrDeviceSerialPort 1.3.6.1.2.1.25.3.1.17 (defined in HOST-RESOURCES-TYPES)
The device type identifier used for a serial port. - Compaq Storage System Fibre Attachment Device Port
- cpqSsFibreAttachmentDevicePort 1.3.6.1.4.1.232.8.2.2.7.1.6 (defined in CPQSTSYS)
Compaq Storage System Fibre Attachment Device Port. This is the Fibre port on a device. For a Fibre attached storage system, this is equal to cpqFcaCntlrBoxIoSlot from the Fibre Channel Array Controller Table. For a Fibre attached tape controller, this is currently set to 1. For a Fibre channel switch, this is currently set to 1. - BDG Device Root Port
- bdgdeviceRootPort 1.3.6.1.4.1.173.7.9.1.1.22 (defined in ctron-bdg-mib)
The port identifier for the port which offers the lowest cost path to the root, i.e. that port for which the sum of the values of the designated cost and path cost parameters held for the port is lowest. - dot5 Physical Management Device Port Count
- dot5PhysMgmtDevicePortCount 1.3.6.1.4.1.52.4.1.1.6.1.1.2 (defined in dot5-phys-mib)
Returns the total number of token ring ports contained within the chassis in which the managing device resides. This count does not include unpopulated TPIM slots, nor does it include ports residing on MIM boards outside of the domain of the managing device. - dot5 Physical Management Device Station Port Count
- dot5PhysMgmtDeviceStnPortCount 1.3.6.1.4.1.52.4.1.1.6.1.1.6 (defined in dot5-phys-mib)
Returns the total number of token ring station ports contained within the chassis in which the managing device resides. This count does not include ports residing on MIM boards outside of the domain of the managing device. - dot5 Physical Management Device Ring Port Count
- dot5PhysMgmtDeviceRingPortCount 1.3.6.1.4.1.52.4.1.1.6.1.1.9 (defined in dot5-phys-mib)
Returns the total number of token ring ring in/ring out ports contained within the chassis in which the managing device resides. This count does not include unpopulated TPIM slots nor does it include ports residing on MIM boards outside of the domain of the managing device. - dot5 Physical Management Device Port Association Changes
- dot5PhysMgmtDevicePortAssociationChanges 1.3.6.1.4.1.52.4.1.1.6.1.1.12 (defined in dot5-phys-mib)
This object is incremented every time the port association changes for a token ring port residing on a MIM board contained within the chassis in which the managing device resides. This count does not include port association changes for ports residing on MIM boards outside of the domain of the managing device. - port Bsci Admin Clear VC On Last Device Down
- portBsciAdminClearVCOnLastDeviceDown 1.3.6.1.4.1.173.7.3.4.1.1.12 (defined in netlink-specific-mib)
terminals are using it. - port Bsci Operation Clear VC On Last Device Down
- portBsciOperClearVCOnLastDeviceDown 1.3.6.1.4.1.173.7.3.4.2.1.12 (defined in netlink-specific-mib)
terminals are using it. - Cisco ASP Protocol Port Device Address Offset
- asppPortDeviceAddressOffset 1.3.6.1.4.1.9.9.55.1.1.1.1.4 (defined in CISCO-ASPP-MIB)
Specifies the byte offset within a frame, which contains the device address. This is used when the asynchronous interface is configured to use the async generic protocol handler. Because no knowledge of the protocol is built-in to the IOS, it must be told where the address field lives within the frame. That way IOS can correctly route the frames for this protocol. - port Device Name
- portDeviceName 1.3.6.1.4.1.7505.1.1.15.1.6 (defined in CALISTA-DPA-MIB)
The device name under which this port is registered with Cisco CallManager. - Cisco Discovery Protocol Cache Device Port
- cdpCacheDevicePort 1.3.6.1.4.1.9.9.23.1.2.1.1.7 (defined in CISCO-CDP-MIB)
The Port-ID string as reported in the most recent CDP message. This will typically be the value of the ifName object (e.g., 'Ethernet0'). The zero-length string indicates no Port-ID field (TLV) was reported in the most recent CDP message.
