The objects described here can be monitored with the IPHost Network Monitor.
You can start SNMP monitoring using free 30-day trial version of IPHost right now.
OID list for system time
- ntsystem System Up Time
- ntsystemSystemUpTime 1.3.6.1.4.1.311.1.1.3.1.1.33.14 (defined in WINDOWS-NT-PERFORMANCE)
Total Time (in seconds) that the computer has been operational since it was last started. - Sys System Build Time
- a3ComSysSystemBuildTime 1.3.6.1.4.1.43.29.4.1.10 (defined in A3COM-SWITCHING-SYSTEMS-MIB)
The build time of the system software. - Sys System Date Time
- a3ComSysSystemDateTime 1.3.6.1.4.1.43.29.4.1.22 (defined in A3COM-SWITCHING-SYSTEMS-MIB)
The current date and time as reflected by the system clock in the format mm/dd/yy hh:mm:ss xM. - Sys System Time Zone
- a3ComSysSystemTimeZone 1.3.6.1.4.1.43.29.4.1.24 (defined in A3COM-SWITCHING-SYSTEMS-MIB)
This parameter specifies, in minutes, displacement of the system west of Greenwich. A negative number for this parameter indicates how many minutes displacement east of Greenwich the site is located. A positive number indicates the number of minutes west of Greenwich. - Sys System Log Date Time
- a3ComSysSystemLogDateTime 1.3.6.1.4.1.43.29.4.1.27.4.1.3 (defined in A3COM-SWITCHING-SYSTEMS-MIB)
Indicates the date and time of the log event and is formatted as follows: MM:DD:YY HH:MM:SS. - Acme Packet Trap Table System Time
- apTrapTableSystemTime 1.3.6.1.4.1.9148.3.2.1.7.1.1.1 (defined in APSYSMGMT-MIB)
The system time of the session border controller. - Compaq Storage System Chassis Time
- cpqSsChassisTime 1.3.6.1.4.1.232.8.2.2.1.1.18 (defined in CPQSTSYS)
Compaq Storage System Chassis Time. This is the storage system chassis's time in tenths of seconds. If the chassis time is not supported, the agent will return 0. - Compaq Storage System Trap Time
- cpqSsTrapTime 1.3.6.1.4.1.232.8.3.3.1.3 (defined in CPQSTSYS)
The time of the trap event that this entry describes. The time is given in year (first octet), month, day of month, hour, minute, second (last octet) order. Each octet gives the value in BCD. - vlan System Operation Time
- vlanSystemOperTime 1.3.6.1.4.1.52.4.2.12.1.2.5.1.1.5 (defined in ctron-sfps-vlan-mib)
Indicates the amount of time (# of time ticks) that this VLAN switch instance has been in its current operational state. - vlan System First Poll Time
- vlanSystemFirstPollTime 1.3.6.1.4.1.52.4.2.12.1.2.5.1.1.12 (defined in ctron-sfps-vlan-mib)
System time when first polled - vlan System Last Poll Time
- vlanSystemLastPollTime 1.3.6.1.4.1.52.4.2.12.1.2.5.1.1.13 (defined in ctron-sfps-vlan-mib)
Last time polled - vlan System Prior Poll Time
- vlanSystemPriorPollTime 1.3.6.1.4.1.52.4.2.12.1.2.5.1.1.14 (defined in ctron-sfps-vlan-mib)
Poll time one before the last poll time - vlan System Delta Poll Time
- vlanSystemDeltaPollTime 1.3.6.1.4.1.52.4.2.12.1.2.5.1.1.15 (defined in ctron-sfps-vlan-mib)
Time difference between last poll time and prior poll time - Enterasys Port Web Authentication System Enhanced Mode Refresh Time
- etsysPwaSystemEnhancedModeRefreshTime 1.3.6.1.4.1.5624.1.2.8.1.17 (defined in enterasys-pwa-mib)
This is the value that is displayed on the PWA login success page as the redirect time. If a user, using PWA enhanced mode, enters a URL of 'http://enterasys.com' prior to being presented with the PWA login page and then successfully authenticates into the network they would be presented with a login success page that displays 'Welcome to the Network. Completing network connections. You will be redirected to http://enterasys.com in approximately 30 seconds'. An end-station that is utilizing the Dynamic Host Configuration Protocol (DHCP) as a means of obtaining an IP address will take some time to transition from the temporary IP address issued by PWA, as part of the authentication process, to the official IP address issued by the network. etsysPwaSystemEnhancedModeRefreshTime provides a configurable time period for the end-stations on a given switch to complete the process of obtaining their official IP addresses and to begin using them. The default value of 30 seconds has been shown to be adequate in most environments. In some networks this time period may need to be longer, and in other networks it could be shorter. In networks that only use static IP addresses a time period on the order of 5 to 10 seconds may be sufficient. A period of less than 5 seconds is not recommended as there is a slight delay after a successful login before the switch transitions the port to forwarding. - Enterasys Service Level System Time
- etsysSrvcLvlSystemTime 1.3.6.1.4.1.5624.1.2.39.1.1.1 (defined in enterasys-service-level-reporting-mib)
The current time of the system. - agent Trap Log System Time
- agentTrapLogSystemTime 1.3.6.1.4.1.14179.1.1.2.4.1.2 (defined in AIRESPACE-SWITCHING-MIB)
System uptime when trap was sent. This entry shows how long the system has been up when the trap occurred. - bsn System Current Time
- bsnSystemCurrentTime 1.3.6.1.4.1.14179.2.3.1.10 (defined in AIRESPACE-WIRELESS-MIB)
This attribute will display the Current System time on the Switch. - bsn Update System Time
- bsnUpdateSystemTime 1.3.6.1.4.1.14179.2.3.1.11 (defined in AIRESPACE-WIRELESS-MIB)
Use this attribute to change the System time on the Switch. Specify the new time in this Format MM/DD/YYYY HH:MM:SS - bsn System Clock Time
- bsnSystemClockTime 1.3.6.1.4.1.14179.2.3.1.49 (defined in AIRESPACE-WIRELESS-MIB)
This object represents the current clock time of the controller and expressed as the number of seconds elapsed since 00:00:00 on January 1, 1970, Coordinated Universal Time (UTC). - Cisco Intrusion Detection System General Local Time
- cidsGeneralLocalTime 1.3.6.1.4.1.9.9.383.1.1.2 (defined in CISCO-CIDS-MIB)
The local time on the Cisco intrusion detection system sensor when the alert was generated. - Cisco Intrusion Detection System General UTC Time
- cidsGeneralUTCTime 1.3.6.1.4.1.9.9.383.1.1.3 (defined in CISCO-CIDS-MIB)
The UTC time on the Cisco intrusion detection system sensor when the alert was generated. - Cisco Intrusion Detection System Health Sensor Statistics Reset Time
- cidsHealthSensorStatsResetTime 1.3.6.1.4.1.9.9.383.1.4.17 (defined in CISCO-CIDS-MIB)
The value of SNMPv2-MIB::sysUpTime when the Sensor specific statistics was reset. The reset time is collectively for the following objects: cidsHealthPacketLoss, cidsHealthPacketDenies, cidsHealthAlarmsGenerated, cidsHealthFragmentsInFRU, cidsHealthDatagramsInFRU, cidsHealthTcpEmbryonicStreams, cidsHealthTcpEstablishedStreams, cidsHealthTcpClosingStreams, cidsHealthTcpStreams - Cisco Digital Media Management System Ha Cluster Last Dmm Status Change Time
- cdmsHaClusterLastDmmStatusChangeTime 1.3.6.1.4.1.9.9.655.1.10.3.1 (defined in CISCO-DIGITAL-MEDIA-SYSTEMS-MIB.)
The time-stamp of the most recent occurrence of the status change of a DMM node in this cluster. A status change is defined as a transition in the value of the object 'cdmsHaDmmClusterMemberOperState'. - Cisco Digital Media Management System Ha Cluster Last Vp Status Change Time
- cdmsHaClusterLastVpStatusChangeTime 1.3.6.1.4.1.9.9.655.1.10.3.4 (defined in CISCO-DIGITAL-MEDIA-SYSTEMS-MIB.)
The time-stamp of the most recent occurrence of the status change of a video portal node in this cluster. A status change is defined as a transition in the value of the object 'cdmsHaVpClusterMemberOperState'. - ip System Statistics Discontinuity Time
- ipSystemStatsDiscontinuityTime 1.3.6.1.2.1.4.31.1.1.46 (defined in IP-MIB)
The value of sysUpTime on the most recent occasion at which any one or more of this entry's counters suffered a discontinuity. If no such discontinuities have occurred since the last re- initialization of the local management subsystem, then this object contains a zero value. - Cisco Dot11 Wireless Intrusion Detection System Eapol Flood Start Time
- cDot11WidsEapolFloodStartTime 1.3.6.1.4.1.9.9.456.1.1.7.1.4 (defined in CISCO-DOT11-WIDS-MIB)
This object indicates the time at which the EAPOL flood event identified by one entry of this table was observed first at this radio interface. - Cisco Dot11 Wireless Intrusion Detection System Eapol Flood Stop Time
- cDot11WidsEapolFloodStopTime 1.3.6.1.4.1.9.9.456.1.1.7.1.5 (defined in CISCO-DOT11-WIDS-MIB)
This object indicates the time at which the the EAPOL flood event observed first at the time indicated by cDot11WidsEapolFloodStartTime has stopped. If this 802.11 station finds that the flood conditions observed in the one or more prior intervals has ceased, it marks the flood event as stopped at the time indicated by this object. That the flood has ceased is indicated by the number of authentication attempts dropping below the value specified by the cDot11WidsEapolFloodThreshold object. A value of 0 for this object indicates that the number of authentication attempts continue to exceed the value specified by the cDot11WidsEapolFloodThreshold object. - Cisco Dot11 Wireless Intrusion Detection System Black List Time
- cDot11WidsBlackListTime 1.3.6.1.4.1.9.9.456.1.1.8.1.3 (defined in CISCO-DOT11-WIDS-MIB)
This object indicates the time at which the client was blacklisted after failing in its attempt to get authenticated with this 802.11 station at this radio interface. - Cisco Entity Quantum Flow Processors System Last Load Time
- ceqfpSystemLastLoadTime 1.3.6.1.4.1.9.9.715.1.1.1.1.4 (defined in CISCO-ENTITY-QFP-MIB)
This object represents the QFP last load time.
