IPHost Monitor – MIBs for Catalyst 4000 switch

The Cisco Catalyst 4000 series switch provides a new advanced enterprise-switching solution for the wiring closet and data center. The Cisco Catalyst 4000 series switch provides intelligent Layer 2 services leveraging 24 Gbps bandwidth architecture for 10/100/1000-Mbps Ethernet Switching.

SNMP monitoring is widely used by IPHost clients and makes your network monitoring tasks simple.With the IPHost SNMP tool, you can monitor any SNMP objects of theCatalyst 4000 switch.You can select a variable to monitor using the built-in MIB browser that provides youwith all variables supported by theCatalyst 4000 switch, their current values and descriptions taken from MIBs.

List of Mibs
for SNMP management and monitoring ofCatalyst 4000 switch

  • BRIDGE-MIB
    This MIB module defines a set of managed objects that instrument devices that conform to the IEEE 802.1 standards for MAC-layer bridges.
  • CISCO-AAA-CLIENT-MIB
  • CISCO-CATOS-ACL-QOS-MIB
  • CISCO-CDP-MIB
    MIB module for management of the Cisco Discovery Protocol in Cisco devices.
  • CISCO-ENTITY-FRU-CONTROL-MIB
    “The CISCO-ENTITY-FRU-CONTROL-MIB is used to monitorand configure operational status ofField Replaceable Units (FRUs) and other managablephysical entities of the system listed in theEntity-MIB (RFC 2737) entPhysicalTable.FRUs include assemblies such as power supplies, fans,processor modules, interface modules, etc.”
  • CISCO-ENVMON-MIB
    MIB module to describe the status of the Environmental Monitor on those devices that support one.
  • CISCO-FLASH-MIB
    Flash operations MIB module.
  • CISCO-IGMP-FILTER-MIB
    IGMP Filter configuration MIB. This MIB provides a mechanism for users to configure the system to intercept IGMP joins for IP Multicast groups identified in this MIB and only allow certain ports to join certain multicast groups.
  • CISCO-IMAGE-MIB
    Router image MIB which identifies the capabilities and characteristics of the image.
  • CISCO-IP-IF-MIB
    The MIB module for configuring IP characteristics of the interfaces of a device.
  • CISCO-LAG-MIB
    This MIB provides Link Aggregation information that are either excluded by IEEE Std 802.3ad (IEEE8023-LAG-MIB) or specific to Cisco products.
  • CISCO-MAC-NOTIFICATION-MIB
    This MIB module is for configuration of the MAC notification feature. MAC notification is a mechanism to inform monitoring devices when there are MAC addresses learnt or removed from the forwarding database of the monitored devices.
  • CISCO-MEMORY-POOL-MIB
    MIB module for monitoring memory pools.
  • CISCO-PAE-MIB
    This MIB provides Port Access Entity information that is either excluded by IEEE Std 802.1x (IEEE8021-PAE-MIB) or specific to Cisco products.
  • CISCO-PAGP-MIB
    MIB module for configuration of Fast Etherchannel and the operation of the Port Aggregation Protocol (PAgP). These features allow two or more physical interfaces to be aggregated together to form a single agport.
  • CISCO-PRIVATE-VLAN-MIB
    MIB module to support Private VLAN feature on Cisco’s switching devices.
  • CISCO-PROCESS-MIB
    MIB module to describe active system processes.
  • CISCO-QOS-POLICY-CONFIG-MIB
    This MIB module defines managed objects that support the policy source configuration of Quality of Service (QoS) on the device.
  • CISCO-RMON-CONFIG-MIB
    This module defines configuration extensions for some of the IETF RMON MIBs.
  • CISCO-STACK-MIB
    Main SNMP MIB for the Catalyst OS products such as Catalyst 1000, Catalyst 1200, Catalyst 4000, Catalyst 5000, and Catalyst 6000. This MIB provides configuration and runtime status for chassis, modules, ports, etc. on the Catalyst systems.
  • CISCO-STP-EXTENSIONS-MIB
    MIB module for managing Cisco extensions to the 802.1D Spanning Tree Protocol (STP).
  • CISCO-SYSLOG-MIB
    MIB module to describe and store the system messages generated by the IOS.
  • CISCO-SYSTEM-MIB
    MIB module to describe and store the system messages generated by the IOS.
  • CISCO-UDLDP-MIB
    This MIB module contains information on the Uni Direction Link Detection Protocol.
  • CISCO-VLAN-BRIDGE-MIB
    “A set of managed objects for optimizing access tobridging related data from RFC 1493. This MIB ismodeled after portions of RFC 1493, adding VLAN IDbased indexing and bitmapped encoding of frequentlyaccessed data.”
  • CISCO-VLAN-MEMBERSHIP-MIB
    “The MIB module for the management of theVLAN Membership within the frame work of CiscoVLAN Architecture, v 2.0 by Keith McCloghrie. The MIBprovides information on VLAN Membership Policy Serversused by a device and VLAN membership assignments ofnon-trunk bridge ports of the device.”
  • CISCO-VMPS-MIB
  • CISCO-VTP-MIB
    MIB module for entities implementing the VTP protocol and Vlan management.
  • ENTITY-MIB
    MIB module for representing multiple logical entities supported by a single SNMP agent.
  • ETHERLIKE-MIB
    MIB module to describe generic objects fo Ethernet-like network interfaces.
  • HC-RMON-MIB
    MIB module for managing remote monitoring device implementations. This MIB module augments the original RMON MIB as specified in RFC 1757 and RFC 1513 and RMON2 MIB as specified in RFC 2021.
  • IEEE8021-PAE-MIB
    Port Access Entity module for managing IEEE 802.1X.
  • IEEE8023-LAG-MIB
    Link Aggregation module for managing IEEE Std 802.3ad.
  • IF-MIB
    MIB module to describe generic objects for network interface sub-layers. This MIB is an updated version of MIB-II’s ifTable, and incorporates the extensions defined in RFC 1229.
  • RFC1213-MIB
    This RFC defines the second version of the Management Information Base (MIB-II) for use with network management protocols in TCP/IP-based internets.
  • RMON2-MIB
    MIB module for managing remote monitoring device implementations. This MIB module augments the original RMON MIB as specified in RFC 1757.
  • RMON-MIB
    This Management Information Base contains standard information relating to Remote Network Monitoring.
  • SMON-MIB
    MIB module for managing remote monitoring device implementations for Switched Networks.
  • SNMP-COMMUNITY-MIB
    This MIB module defines objects to help support coexistence between SNMPv1, SNMPv2c, and SNMPv3.
  • SNMP-FRAMEWORK-MIB
    The SNMP Management Architecture MIB.
  • SNMP-MPD-MIB
    This is the management information base module for Message Processing and Dispatching.
  • SNMP-NOTIFICATION-MIB
    This MIB module defines MIB objects which provide mechanisms to remotely configure the parameters used by an SNMP entity for the generation of notifications.
  • SNMP-TARGET-MIB
    This MIB module defines MIB objects which provide mechanisms to remotely configure the parameters used by an SNMP entity for the generation of SNMP messages.
  • SNMP-USM-MIB
    The management information definitions for the SNMP User-based Security Model.
  • SNMP-VACM-MIB
    The management information definitions for the View-based Access Control Model for SNMP.

You can start Catalyst 4000 switch monitoring using free 30-day trial version of IPHost Network Monitor right now.Witn IPHost SNMP monitor you can monitor network performance, audit network usage, detect network faults, or inappropriate access. The IPHost’s SNMP monitor can communicate and interact with any SNMP-enabled device.

Free 30-day trial version of IPHost Network Monitor is available. During your trial you can get support by e-mail, please use contact form to send all your inquiries on IPHost Network Monitor features and purchase.

Windows Interface Screenshot Web Interface Screenshot
Windows Interface Screenshot Web Interface Screenshot
 

Download the free trial of IPHost Network Monitor and start to monitor your network and vital applications in a few minutes.



IPHost Network Monitor 5.4 build 14598 of May 27, 2024. File size: 112MB


Comments are closed.