The Cisco Aironet 1240AG Series is a component of the Cisco Unified Wireless Network, a comprehensive solution that delivers an integrated, end-to-end wired and wireless network.
SNMP monitoring is widely used by IPHost clients and makes your network monitoring tasks simple.With the IPHost SNMP tool, you can monitor any SNMP objects of theCisco Aironet 1240 Access Point.You can select a variable to monitor using the built-in MIB browser that provides youwith all variables supported by theCisco Aironet 1240 Access Point, their current values and descriptions taken from MIBs.
List of Mibs
for SNMP management and monitoring ofCisco Aironet 1240 Access Point
- BRIDGE-MIB
This MIB module defines a set of managed objects that instrument devices that conform to the IEEE 802.1 standards for MAC-layer bridges. - CISCO-AAA-SERVER-MIB
MIB module for monitoring communications and status of AAA Server operation. - CISCO-CDP-MIB
MIB module for management of the Cisco Discovery Protocol in Cisco devices. - CISCO-CLASS-BASED-QOS-MIB
This MIB provides read access to Quality of Service (QoS) configuration and statistics information for Cisco platforms that support the Modular Quality of Service Command-line Interface (Modular QoS CLI). - CISCO-CONFIG-COPY-MIB
“This MIB facilitates writing of configuration filesof an SNMP Agent running Cisco’s IOS in the following ways:to and from the net, copying running configurations to startupconfigurations and vice-versa, and copying a configuration(running or startup) to and from the local IOS file system.” - CISCO-CONFIG-MAN-MIB
The MIB represents a model of configuration data that exists in various locations - CISCO-DDP-IAPP-MIB
This MIB module describes the management support for the Inter-Access Point Protocol (IAPP). - CISCO-DOT11-ASSOCIATION-MIB
This MIB module provides network management information on IEEE 802.11 wireless device association management and data packet forwarding configuration and statistics. - CISCO-DOT11-CONTEXT-SERVICES-CAPABILITY
This MIB module contains agent capabilities for CISCO-DOT11-CONTEXT-SERVICES-MIB. - CISCO-DOT11-CONTEXT-SERVICES-CLIENT-CAPABILITY
This MIB module contains agent capabilities for CISCO-CONTEXT-SERVICES-CLIENT-MIB. - CISCO-DOT11-CONTEXT-SERVICES-CLIENT-MIB
This MIB is intended to be implemented on all 802.11 Access Points and Wireless Bridges that need to participate in the context management process and make use of the services provided by the entities offering WDS and WNS. - CISCO-DOT11-CONTEXT-SERVICES-MIB
This MIB supports managing the devices offering WDS and WNS services. - CISCO-DOT11-IF-MIB
This MIB module provides network management support for Cisco IEEE 802.11 Wireless LAN type device (Access Point) radio interfaces. - CISCO-DOT11-LBS-MIB
- CISCO-DOT11-QOS-MIB
This MIB module provides network management support for QoS on wireless LAN devices. The objects defined in this MIB provide equivalent support as the objects in the IEEE 802.11E Standard draft. - CISCO-DOT11-RADIO-DIAGNOSTIC-CAPABILITY
This MIB module contains agent capabilities for CISCO-DOT11-RADIO-DIAGNOSTIC-MIB. - CISCO-DOT11-RADIO-DIAGNOSTIC-MIB
This MIB is intended to be implemented on all 802.11 based Access Points and Wireless Bridges that need to participate in radio environment diagnosis. - CISCO-DOT11-SSID-SECURITY-MIB
This MIB module provides network management support for Cisco IEEE 802.11 Wireless LAN devices association and authentication. - CISCO-DOT11-WIDS-CAPABILITY
This MIB module contains agent capabilities for CISCO-DOT11-WIDS-MIB. - CISCO-DOT11-WIDS-MIB
This MIB is intended to be implemented on IOS based network entities for the purpose of providing network management stations information about the various attempts to compromise the security in the 802.11-based wireless networks. - CISCO-ENTITY-ASSET-MIB
This MIB module allows you to monitor the asset information of items in the ENTITY-MIB (RFC 2037) entPhysical table. - CISCO-ENTITY-EXT-MIB
This MIB is an extension of the ENTITY-MIB specified in RFC2737. - CISCO-ENTITY-VENDORTYPE-OID-MIB
This module defines the object identifiers that are assigned to various components on Cisco products, which are used by the entPhysicalTable of the ENTITY-MIB to uniquely identify the type of each physical entry. - CISCO-FLASH-MIB
Flash operations MIB module. - CISCO-IETF-DOT11-QOS-EXT-MIB
This MIB module provides network management support for QoS on IEEE 802.11 wireless LAN devices. This MIB is an extension to QoS MIB defined in IEEE 802.11E standard. - CISCO-IETF-DOT11-QOS-MIB
This MIB module provides network management support for QoS on wireless LAN devices. - CISCO-IMAGE-MIB
Router image MIB which identifies the capabilities and characteristics of the image. - CISCO-IP-PROTOCOL-FILTER-MIB
The MIB module for management of information to support packet filtering on IP protocols. - CISCO-L2-DEV-MONITORING-MIB
This MIB module is for monitoring of active layer 2 devices by hot standby layer 2 devices and the configuration of hot standby switch-over parameters. - CISCO-MEMORY-POOL-MIB
MIB module for monitoring memory pools. - CISCO-POE-PD-MIB
- CISCO-PROCESS-MIB
MIB module to describe active system processes. - CISCO-PRODUCTS-MIB
This MIB module defines the object identifiers that are assigned to various hardware platforms, and hence are returned as values for sysObjectID. - CISCO-SMI
The Structure of Management Information for the Cisco enterprise. - CISCO-SYSLOG-EVENT-EXT-MIB
This MIB module extends the Cisco Syslog MIB and provides network management support to handle and process Syslog messages as device events. - CISCO-SYSLOG-MIB
MIB module to describe and store the system messages generated by the IOS. - CISCO-TBRIDGE-DEV-IF-MIB
This MIB module provides network management support for configuration and status information of devices supporting transparent bridging functions. - CISCO-TC
This MIB module defines textual conventions used throughout Cisco enterprise MIBs. - CISCO-VLAN-IFTABLE-RELATIONSHIP-MIB
Cisco VLAN ifTable Relationship MIB lists VLAN-id and ifIndex information for routed VLAN interfaces. - CISCO-WDS-IDS-CAPABILITY
This MIB module contains the agent capabilities for CISCO-WDS-IDS-MIB. - CISCO-WDS-IDS-MIB
This MIB is intended to be implemented on all IOS based network entities that provide Wireless Domain Services, for the purpose of providing network management stations information about the various attempts to compromise the security - CISCO-WLAN-MAN-MIB
This MIB module provides network management and configuration support for IEEE 802.11 Wireless LAN devices. - CISCO-WLAN-VLAN-MIB
This MIB module provides network management and configuration support for IEEE 802.11 Wireless LAN devices. - ENTITY-MIB
MIB module for representing multiple logical entities supported by a single SNMP agent. - IANAifType-MIB
This MIB module defines the IANAifType Textual Convention, and thus the enumerated values of the ifType object defined in MIB-II’s ifTable. - IEEE802dot11-MIB
MIB module for IEEE 802.11 entities. - IF-MIB
MIB module for managing remote monitoring device implementations. This MIB module augments the original RMON MIB as specified in RFC 1757 and RFC 1513 and RMON2 MIB as specified in RFC 2021. - INET-ADDRESS-MIB
This MIB module defines textual conventions for representing Internet addresses. An Internet address can be an IPv4 address, an IPv6 address or a DNS domain name. - OLD-CISCO-CHASSIS-MIB
This Management Information Base module contains information regarding polling the chassis information (specifically the chassis serial number) from Cisco routers and switches. tarting with IOS 12.0 - OLD-CISCO-SYS-MIB
- OLD-CISCO-SYSTEM-MIB
- OLD-CISCO-TS-MIB
- P-BRIDGE-MIB
The Bridge MIB Extension module for managing Priority and Multicast Filtering, defined by IEEE 802.1D-1998. - Q-BRIDGE-MIB
The VLAN Bridge MIB module for managing Virtual Bridged Local Area Networks, as defined by IEEE 802.1Q-1998. - RFC1213-MIB
This RFC defines the second version of the Management Information Base (MIB-II) for use with network management protocols in TCP/IP-based internets. - RFC1398-MIB
This RFC defines a portion of the Management Information Base (MIB) for use with network management protocols in TCP/IP-based internets. In particular, it defines objects for managing ethernet-like objects. - SNMPv2-MIB
This MIB module defines MIB objects for SNMPv2 entities. - SNMPv2-SMI
This MIB module defines MIB objects for the Structure of Management Information (SMI). - SNMPv2-TC
This MIB module defines MIB objects for SNMPv2 Textual Conventions.
You can start Cisco Aironet 1240 Access Point monitoring using free 30-day trial version of IPHost Network Monitor right now.Witn IPHost SNMP monitor you can monitor network performance, audit network usage, detect network faults, or inappropriate access. The IPHost’s SNMP monitor can communicate and interact with any SNMP-enabled device.
Free 30-day trial version of IPHost Network Monitor is available. During your trial you can get support by e-mail, please use contact form to send all your inquiries on IPHost Network Monitor features and purchase.
 |
 |
|
| Windows Interface Screenshot | Web Interface Screenshot |
Download the free trial of IPHost Network Monitor and start to monitor your network and vital applications in a few minutes.
IPHost Network Monitor 5.4 build 14614 of November 05, 2024. File size: 112MB
Comments are closed.