CISCO-MVPN-MIB Download

ciscoMvpnMvrfNumber

The number of MVRFs that are present in this device.

ciscoMvpnNotificationEnable

If this object is TRUE, then the generation of all notifications defined in this MIB is enabled.

ciscoMvpnGenericTable

This table gives the generic information about the MVRFs present in this device.

ciscoMvpnGenericEntry

An entry in this table is created for every MVRF in the device. Note that many implementations may have MVRF for global VRF (VRF0) by default in the device. Also note that existence of the correspoding VRF in L3VPN-MPLS-VPN-MIB is necessary for a row to e ...

ciscoMvpnGenOperStatusChange

This object describes the last operational change that happened for the given MVRF. createdMvrf - indicates that the MVRF was created in the device. deletedMvrf - indicates that the MVRF was deleted from the device. A row in this table will never have cis ...

ciscoMvpnGenOperChangeTime

The time at which the last operational change for the MVRF in question took place. The last operational change is specified by ciscoMvpnGenOperStatusChange.

ciscoMvpnGenAssociatedInterfaces

Total number of interfaces associated with this MVRF (including the MDT tunnel interface) with ifOperStatus = up(1).

ciscoMvpnGenRowStatus

This variable is used to create or delete a row in this table.

ciscoMvpnMdtDefaultTable

This table specifies the default MDT address and the encapsulation type used for a MVRF instance.

ciscoMvpnMdtDefaultEntry

An entry in this table is created for every MVRF for which a default MDT group is configured. A MVRF which does not have a default MDT group configured will not appear in this table. Creation of a row in this table is the equivalent of configuring default ...

ciscoMvpnMdtDefaultAddrType

The Internet address type of ciscoMvpnMdtDefaultAddress.

ciscoMvpnMdtDefaultAddress

The default MDT address to be used for the MVRF in question.

ciscoMvpnMdtEncapsType

The encapsulation type to be used in the MVRF in question.

ciscoMvpnMdtDefaultRowStatus

This variable is used to create, modify or delete a row in this table.

ciscoMvpnMdtDataTable

This table specifies the range of data MDT addresses and associated variables for a MVRF instance.

ciscoMvpnMdtDataEntry

An entry in this table is created for every MVRF for which a data MDT group range is configured. A MVRF which does not have a data MDT group range configured will not appear in this table. Creation of a row in this table is the equivalent of configuring d ...

ciscoMvpnMdtDataRangeAddrType

The Internet address type of ciscoMvpnMdtDataRangeAddress.

ciscoMvpnMdtDataRangeAddress

The data MDT group range address for the given MVRF. This along with ciscoMvpnMdtDataWildcardBits gives the pool of data MDT addresses that can be used for encapsulation in the MVRF upon data MDT switchover.

ciscoMvpnMdtDataWildcardType

The Internet address type of ciscoMvpnMdtDataWildcardBits.

ciscoMvpnMdtDataWildcardBits

Wildcard bits which when used along with data MDT range address, give a pool of addresses to be used in a MVRF. For example, if ciscoMvpnMdtDataRangeAddress is 239.1.2.0 and ciscoMvpnMdtDataWildcardBits is 0.0.0.3, the possible data MDT addresses are 239. ...

ciscoMvpnMdtDataThreshold

The bandwidth threshold value which when exceeded for a multicast routing entry in the given MVRF, triggers usage of data MDT address instead of default MDT address for encapsulation.

ciscoMvpnMdtDataRowStatus

This variable is used to create, modify or delete a row in this table.

ciscoMvpnMrouteMdtTable

Given a multicast routing entry and the context MVRF, this table provides information about the MDT group being used for encapsulating the traffic for the multicast routing entry in the provider network at the instance of querying. Note that this table is ...

ciscoMvpnMrouteMdtEntry

An entry in this table exists for a multicast routing entry the traffic for which is being encapsulated in a context MVRF.

ciscoMvpnMrouteMvrfGrpAddrType

The Internet address type of ciscoMvpnMrouteMvrfGroup.

ciscoMvpnMrouteMvrfGroup

Group adddress of multicast routing entry in question.

ciscoMvpnMrouteMvrfSrcAddrType

The Internet address type of ciscoMvpnMrouteMvrfSource.

ciscoMvpnMrouteMvrfSource

Source adddress of the multicast routing entry in question.

ciscoMvpnMrouteUpDownStreamInfo

Indicates if this PE is the upstream (sending) or the downstream (receiving) router for the multicast routing entry specified by ciscoMvpnMrouteMvrfSource and ciscoMvpnMrouteMvrfGroup in the context MVRF specified by mplsVpnVrfName. Note that there may be ...

ciscoMvpnMrouteMdtGrpAddrType

The Internet address type of ciscoMvpnMrouteMdtGroup.

ciscoMvpnMrouteMdtGroup

MDT group address used to encapsulate the multicast routing entry specified by ciscoMvpnMrouteMvrfSource and ciscoMvpnMrouteMvrfGroup in the context MVRF specified by mplsVpnVrfName.

ciscoMvpnMrouteMdtType

Indicates the type of MDT group used for encapsulation.

ciscoMvpnBgpMdtUpdateTable

This table has information about the BGP advertisement of the the MDT groups. (These advertisements are generated and used for source discovery when SSM is used.)

ciscoMvpnBgpMdtUpdateEntry

An entry in this table is created when a BGP advertisement of the MDT group is received and cached in the PE device. An entry in this table deleted when such a cached BGP MDT update is withdrawn.

ciscoMvpnBgpMdtUpdGrpAddrType

The Internet address type of ciscoMvpnBgpMdtUpdateGroup.

ciscoMvpnBgpMdtUpdateGroup

MDT group address in the BGP MDT advertisement.

ciscoMvpnBgpMdtUpdateRd

RD (route distinguisher) in the BGP MDT advertisement. This is the RD corresponding to the originator PE.

ciscoMvpnBgpMdtUpdSrcAddrType

The Internet address type of ciscoMvpnBgpMdtUpdateSource.

ciscoMvpnBgpMdtUpdateSource

MDT source address in the BGP MDT advertisement.

ciscoMvpnBgpMdtUpdOrigAddrType

The Internet address type of ciscoMvpnBgpMdtUpdateOriginator.

ciscoMvpnBgpMdtUpdateOriginator

The BGP peering address of the device that originated (or advertized) the BGP MDT update.

ciscoMvpnBgpMdtUpdNhAddrType

The Internet address type of ciscoMvpnBgpMdtUpdateNexthop.

ciscoMvpnBgpMdtUpdateNexthop

The next-hop address (address of the border router to be used to reach the destination network) in the BGP MDT advertisement.

ciscoMvpnMdtJnRcvTable

This table has information about the data MDT join TLVs received by a device.

ciscoMvpnMdtJnRcvEntry

An entry in this table is created or updated for every MDT data join TLV received and cached in the device. The value of mplsVpnVrfName in such an entry specifies the name of the MVRF for which the data MDT groups from the TLVs are used.

ciscoMvpnMdtJnRcvGrpAddrType

The Internet address type of ciscoMvpnMdtJnRcvGroup.

ciscoMvpnMdtJnRcvGroup

Data MDT group address in the MDT join TLV.

ciscoMvpnMdtJnRcvSrcAddrType

The Internet address type of ciscoMvpnMdtJnRcvSource.

ciscoMvpnMdtJnRcvSource

Source address for the MDT multicast routing entry created following the receipt of MDT join TLV.

ciscoMvpnMdtJnRcvUpTime

The time since this MDT join TLV was first received by the device.

ciscoMvpnMdtJnRcvExpTime

The amount of time remaining before the cache corresponding to this MDT join TLV is deleted from the device and the corresponding MDT multicast routing entry is marked as a non-MDT entry. Note that multiple TLVs for a data MDT group may be received by a ...

ciscoMvpnMdtJnSendTable

This table specifies the data MDT Join TLVs sent by a device.

ciscoMvpnMdtJnSendEntry

Entries in this table exist for data MDT Join TLVs that are being sent by this device to other PEs.

ciscoMvpnMdtJnSendGrpAddrType

The Internet address type of ciscoMvpnMdtJnSendGroup.

ciscoMvpnMdtJnSendGroup

This indicates the address of a multicast group in the MVRF specified by the column mplsVpnVrfName. This along with ciscoMvpnMdtJnSendSource identifies the multicast routing entry for which the MDT join TLV is sent.

ciscoMvpnMdtJnSendSrcAddrType

The Internet address type of ciscoMvpnMdtJnSendSource.

ciscoMvpnMdtJnSendSource

This indicates the address of a source in the MVRF specified by the column mplsVpnVrfName. This, along with ciscoMvpnMdtJnSendGroup identifies the multicast routing entry for which the MDT join TLV is sent.

ciscoMvpnMdtJnSendMdtGrpAddrType

The Internet address type of ciscoMvpnMdtJnSendMdtGroup.

ciscoMvpnMdtJnSendMdtGroup

The data MDT group in the MDT Join TLV sent.

ciscoMvpnMdtJnSendMdtRefCt

Indicates how many multicast routing entries in the MVRF specified by the column mplsVpnVrfName are using ciscoMvpnMdtJnSendMdtGroup for encapsulation.

ciscoMvpnTunnelTable

This table gives information about the MVPN/MDT tunnels present in the device.

ciscoMvpnTunnelEntry

An entry in this table is created for every MVPN tunnel interface present in the device. The ifType for a MVPN tunnel is 'tunnel' (131). (A MVPN tunnel interface should have relevant generic support in the IF-MIB and in the internet draft, draft-thaler-in ...

ciscoMvpnTunnelName

The canonical name assigned to the tunnel. The ifName of this tunnel interface should have a value equal to ciscoMvpnTunnelName.

ciscoMvpnTunnelMvrf

Name of the MVRF that this tunnel is associated with. This object has the same value as mplsVpnVrfName for the MVRF.

ciscoMvpnScalarGroup

Collection of scalar objects required for MVPN management.

ciscoMvpnMIBGenericGroup

Collection of objects needed for MVPN MVRF management.

ciscoMvpnMIBMdtDefaultGroup

Collection of objects needed for MVPN default MDT group management.

ciscoMvpnMIBMdtDataGroup

Collection of objects needed for MVPN data MDT group management.

ciscoMvpnMIBMrouteMdtGroup

Collection of objects that list sources in a MVRF and the corresponding MDT groups.

ciscoMvpnMIBBgpMdtUpdateGroup

Collection of objects needed for MVPN BGP MDT updates related information.

ciscoMvpnMIBMdtJnRcvGroup

Collection of objects needed for management of MVPN MDT data joins received by a device.

ciscoMvpnMIBMdtJnSendGroup

Collection of objects needed for management of MVPN MDT data joins received by a device.

ciscoMvpnTunnelGroup

Objects required for MDT tunnel interface management.