The objects described here can be monitored with the IPHost Network Monitor.
You can start SNMP monitoring using free 30-day trial version of IPHost right now.
OID list for bridge address
- Sys Bridge Address Table Size
- a3ComSysBridgeAddressTableSize 1.3.6.1.4.1.43.29.4.10.2.1.3 (defined in A3COM-SWITCHING-SYSTEMS-BRIDGE-MIB)
The size of the address table for the bridge identified by this entry. - Sys Bridge Address Table Count
- a3ComSysBridgeAddressTableCount 1.3.6.1.4.1.43.29.4.10.2.1.4 (defined in A3COM-SWITCHING-SYSTEMS-BRIDGE-MIB)
The current count of addresses in the address table for the bridge identified by this entry. - Sys Bridge Address Table Peak Count
- a3ComSysBridgeAddressTablePeakCount 1.3.6.1.4.1.43.29.4.10.2.1.5 (defined in A3COM-SWITCHING-SYSTEMS-BRIDGE-MIB)
The peak count of addresses in the address table for the bridge identified by this entry, since the system was last initialized. - Sys Bridge Address Threshold
- a3ComSysBridgeAddressThreshold 1.3.6.1.4.1.43.29.4.10.2.1.6 (defined in A3COM-SWITCHING-SYSTEMS-BRIDGE-MIB)
A reporting threshold for the total number of addresses known for the bridge identified by this entry. When this threshold is reached, the event a3ComSysBridgeAddressThresholdEvent is generated. The range of valid values for setting this object is between 1 and the corresponding value reported by a3ComSysBridgeAddressTableSize + 1 (Note that this range applies to values issued in set requests. The current value may be outside this range, for example if the corresponding value of a3ComSysBridgeMode is changed). Setting this object to one greater than the address table size disables the generation of a3ComSysBridgeAddressThresholdEvents since the limit will never be reached. - Sys Bridge Address Learn Mode
- a3ComSysBridgeAddressLearnMode 1.3.6.1.4.1.43.29.4.10.2.1.19 (defined in A3COM-SWITCHING-SYSTEMS-BRIDGE-MIB)
This object determins the behavior of address management normal(1) - The device will learn dynamic addresses and static entries can be added. secure(2) - Static, management, and control addresses can be added to a database. If a dynamic address is seen that does not match an entry in the database, then the port will be disabled. - Sys Bridge Address Aging Interval
- a3ComSysBridgeAddressAgingInterval 1.3.6.1.4.1.43.29.4.10.2.1.20 (defined in A3COM-SWITCHING-SYSTEMS-BRIDGE-MIB)
This object determines how long (in seconds) a dynamic entry is kept in the database. - Sys Bridge Loop Detect Source Address
- a3ComSysBridgeLoopDetectSrcAddress 1.3.6.1.4.1.43.29.4.10.2.1.22 (defined in A3COM-SWITCHING-SYSTEMS-BRIDGE-MIB)
This object returns the source address that is used to determine if a loop is present between client ports - Sys Bridge Port Address Action
- a3ComSysBridgePortAddressAction 1.3.6.1.4.1.43.29.4.10.3.1.5 (defined in A3COM-SWITCHING-SYSTEMS-BRIDGE-MIB)
This object, when read, always returns the value other(1). The behavior of setting this object to each of the acceptable values is as follows: freezeAddress: causes all the learned dynamic addresses to be converted into static addresses. flushAddress: causes all the addresses to be flushed from the address list for the bridge port identified by this entry. flushDynamicAddress: causes all dynamic addresses to be flushed from the address list for the bridge port identified by this entry. - Sys Bridge Port Address Max Limit
- a3ComSysBridgePortAddressMaxLimit 1.3.6.1.4.1.43.29.4.10.3.1.35 (defined in A3COM-SWITCHING-SYSTEMS-BRIDGE-MIB)
This object controls the maximum number of unicast addresses that can be learned or configured on a port. This value is set on a per port basis. The value can't be set lower than the current number of addresses on a port. - Sys Bridge Port Address State
- a3ComSysBridgePortAddressState 1.3.6.1.4.1.43.29.4.10.3.1.36 (defined in A3COM-SWITCHING-SYSTEMS-BRIDGE-MIB)
This object returns a reason code that will indicate why a given port was disable, when a3ComDaAddressMode is set to secure. - Sys Bridge Port Address Table
- a3ComSysBridgePortAddressTable 1.3.6.1.4.1.43.29.4.10.5 (defined in A3COM-SWITCHING-SYSTEMS-BRIDGE-MIB)
A list of bridge port address information. A single entry exists in this list for each learned address, accross all bridge ports and all bridges managed by this agent. - Sys Bridge Port Address Remote Address
- a3ComSysBridgePortAddressRemoteAddress 1.3.6.1.4.1.43.29.4.10.5.1.4 (defined in A3COM-SWITCHING-SYSTEMS-BRIDGE-MIB)
The remote MAC address detected on the bridge port identified by to this entry. Setting this object results in an attempt to create a new entry in the table. Since the value of a3ComSysBridgePortAddressIndex is determined automatically internal to the bridge, a set is only successful if the index value specified for a3ComSysBridgePortAddressIndex is zero. A get-next using the values of a3ComSysBridgePortAddressTypeIndex and a3ComSysBridgePortAddressPortIndex can be used to determine the address index assigned to the newly added address entry. - Sys Bridge Port Address Type
- a3ComSysBridgePortAddressType 1.3.6.1.4.1.43.29.4.10.5.1.5 (defined in A3COM-SWITCHING-SYSTEMS-BRIDGE-MIB)
This object, when read, always returns the value valid(1). Setting this object to invalid(2) will remove the corresponding address entry from the table. - Sys Bridge Port Address Is Static
- a3ComSysBridgePortAddressIsStatic 1.3.6.1.4.1.43.29.4.10.5.1.6 (defined in A3COM-SWITCHING-SYSTEMS-BRIDGE-MIB)
A value indicating whether this MAC address was statically configured or was dynamically learned. Note that isStatic(1) is only valid for set operations. - Sys Bridge Port Address Static Port
- a3ComSysBridgePortAddressStaticPort 1.3.6.1.4.1.43.29.4.10.5.1.7 (defined in A3COM-SWITCHING-SYSTEMS-BRIDGE-MIB)
If the corresponding value of the object a3ComSysBridgePortAddressIsStatic is isStatic(1), this object indicates the local bridge port index (as reported by a3ComSysBridgePortLocalIndex) for which this address MAC was statically configured. If the object a3ComSysBridgePortAddressIsStatic has the value isDynamic(2), the value of this object is 0. - Sys Bridge Port Address Age
- a3ComSysBridgePortAddressAge 1.3.6.1.4.1.43.29.4.10.5.1.8 (defined in A3COM-SWITCHING-SYSTEMS-BRIDGE-MIB)
This object indicates the time, in seconds, elapsed since a packet containing this address as a source was last seen on the bridge port identified by this entry. - Sys Bridge Vlan Port Address Table
- a3ComSysBridgeVlanPortAddressTable 1.3.6.1.4.1.43.29.4.10.8 (defined in A3COM-SWITCHING-SYSTEMS-BRIDGE-MIB)
A list of vlan bridge port address information. A single entry exists in this list for each learned address, across all vlan bridge ports and all vlan bridges managed by this agent. - Sys Bridge Vlan Port Address Entry
- a3ComSysBridgeVlanPortAddressEntry 1.3.6.1.4.1.43.29.4.10.8.1 (defined in A3COM-SWITCHING-SYSTEMS-BRIDGE-MIB)
A bridge vlan port address entry contains information about a particular bridge vlan port address. To create a new entry, set an instance of a3ComSysBridgeVlanPortAddressRemoteAddress with the address index portion of the instance set to 0, to a valid value. To remove an entry, set the instance of the a3ComSysBridgeVlanPortAddressType for the entry to invalid(2). - Sys Bridge Vlan Port Address Bridge Index
- a3ComSysBridgeVlanPortAddressBridgeIndex 1.3.6.1.4.1.43.29.4.10.8.1.1 (defined in A3COM-SWITCHING-SYSTEMS-BRIDGE-MIB)
The index of the bridge vlan identified by this entry, relative to this agent. - Sys Bridge Vlan Port Address Vlan Index
- a3ComSysBridgeVlanPortAddressVlanIndex 1.3.6.1.4.1.43.29.4.10.8.1.2 (defined in A3COM-SWITCHING-SYSTEMS-BRIDGE-MIB)
The index of the vlan identified by this entry, within the bridge identified by this entry. - Sys Bridge Vlan Port Address Port Index
- a3ComSysBridgeVlanPortAddressPortIndex 1.3.6.1.4.1.43.29.4.10.8.1.3 (defined in A3COM-SWITCHING-SYSTEMS-BRIDGE-MIB)
The index of the bridge vlan port identified by this entry, within the bridge vlan identified by this entry. - Sys Bridge Vlan Port Address Index
- a3ComSysBridgeVlanPortAddressIndex 1.3.6.1.4.1.43.29.4.10.8.1.4 (defined in A3COM-SWITCHING-SYSTEMS-BRIDGE-MIB)
The index of this address entry within the bridge vlan address table for the bridge identified by this entry. This index ranges from 1 to the corresponding value of a3ComSysBridgeAddressTableSize. - Sys Bridge Vlan Port Address Remote Address
- a3ComSysBridgeVlanPortAddressRemoteAddress 1.3.6.1.4.1.43.29.4.10.8.1.5 (defined in A3COM-SWITCHING-SYSTEMS-BRIDGE-MIB)
The remote MAC address detected on the bridge vlan port identified by to this entry. Setting this object results in an attempt to create a new entry in the table. Since the value of a3ComSysBridgeVlanPortAddressIndex is determined automatically internal to the bridge vlan, a set is only successful if the index value specified for a3ComSysBridgeVlanPortAddressIndex is zero. A get-next using the values of a3ComSysBridgeVlanPortAddressTypeIndex and a3ComSysBridgeVlanPortAddressPortIndex can be used to determine the address index assigned to the newly added address entry. - Sys Bridge Vlan Port Address Type
- a3ComSysBridgeVlanPortAddressType 1.3.6.1.4.1.43.29.4.10.8.1.6 (defined in A3COM-SWITCHING-SYSTEMS-BRIDGE-MIB)
This object, when read, always returns the value valid(1). Setting this object to invalid(2) will remove the corresponding address entry from the table. - Sys Bridge Vlan Port Address Is Static
- a3ComSysBridgeVlanPortAddressIsStatic 1.3.6.1.4.1.43.29.4.10.8.1.7 (defined in A3COM-SWITCHING-SYSTEMS-BRIDGE-MIB)
A value indicating whether this MAC address was statically configured or was dynamically learned. Note that isStatic(1) is only valid for set operations. - Sys Bridge Vlan Port Address Static Port
- a3ComSysBridgeVlanPortAddressStaticPort 1.3.6.1.4.1.43.29.4.10.8.1.8 (defined in A3COM-SWITCHING-SYSTEMS-BRIDGE-MIB)
If the corresponding value of the object a3ComSysBridgeVlanPortAddressIsStatic is isStatic(1), this object indicates the local bridge port index (as reported by a3ComSysBridgePortLocalIndex) for which this address MAC was statically configured. If the object a3ComSysBridgeVlanPortAddressIsStatic has the value isDynamic(2), the value of this object is 0. - Sys Bridge Vlan Port Address Age
- a3ComSysBridgeVlanPortAddressAge 1.3.6.1.4.1.43.29.4.10.8.1.9 (defined in A3COM-SWITCHING-SYSTEMS-BRIDGE-MIB)
This object indicates the time, in seconds, elapsed since a packet containing this address as a source was last seen on the bridge vlan port identified by this entry. - Filter Address Group Bridge Mask
- a3ComFilterAddressGroupBridgeMask 1.3.6.1.4.1.43.29.4.20.1.3.1.3 (defined in A3COM-SWITCHING-SYSTEMS-FILTER-MIB)
A mask that uniquely identifies the bridge value(s) associated with this address group entry. For example, 0x0000 0000 0000 0003 represents the address group entry in bridge number 1 and 2. - Sys Bridge Address Table Size
- a3ComSysBridgeAddressTableSize 1.3.6.1.4.1.43.29.4.10.2.1.3 (defined in A3COM-SWITCHING-SYSTEMS-MIB)
The size of the address table for the bridge identified by this entry. - Sys Bridge Address Table Count
- a3ComSysBridgeAddressTableCount 1.3.6.1.4.1.43.29.4.10.2.1.4 (defined in A3COM-SWITCHING-SYSTEMS-MIB)
The current count of addresses in the address table for the bridge identified by this entry. - Sys Bridge Address Table Peak Count
- a3ComSysBridgeAddressTablePeakCount 1.3.6.1.4.1.43.29.4.10.2.1.5 (defined in A3COM-SWITCHING-SYSTEMS-MIB)
The peak count of addresses in the address table for the bridge identified by this entry, since the system was last initialized. - Sys Bridge Address Threshold
- a3ComSysBridgeAddressThreshold 1.3.6.1.4.1.43.29.4.10.2.1.6 (defined in A3COM-SWITCHING-SYSTEMS-MIB)
A reporting threshold for the total number of addresses known for the bridge identified by this entry. When this threshold is reached, the event a3ComSysBridgeAddressThresholdEvent is generated. The range of valid values for setting this object is between 1 and the corresponding value reported by a3ComSysBridgeAddressTableSize + 1 (Note that this range applies to values issued in set requests. The current value may be outside this range, for example if the corresponding value of a3ComSysBridgeMode is changed). Setting this object to one greater than the address table size disables the generation of a3ComSysBridgeAddressThresholdEvents since the limit will never be reached. - Sys Bridge Spanning Tree Protocol Group Address
- a3ComSysBridgeSTPGroupAddress 1.3.6.1.4.1.43.29.4.10.2.1.11 (defined in A3COM-SWITCHING-SYSTEMS-MIB)
Spanning tree bridge group address. The address cannot be changed if the spanning tree is enabled (a3ComSysBridgeStpEnabled). - Sys Bridge Port Address Action
- a3ComSysBridgePortAddressAction 1.3.6.1.4.1.43.29.4.10.3.1.5 (defined in A3COM-SWITCHING-SYSTEMS-MIB)
This object, when read, always returns the value other(1). The behavior of setting this object to each of the acceptable values is as follows: freezeAddress: causes all the learned dynamic addresses to be converted into static addresses. flushAddress: causes all the addresses to be flushed from the address list for the bridge port identified by this entry. flushDynamicAddress: causes all dynamic addresses to be flushed from the address list for the bridge port identified by this entry. - Sys Bridge Port Address Table
- a3ComSysBridgePortAddressTable 1.3.6.1.4.1.43.29.4.10.5 (defined in A3COM-SWITCHING-SYSTEMS-MIB)
A list of bridge port address information. A single entry exists in this list for each learned address, accross all bridge ports and all bridges managed by this agent. - Sys Bridge Port Address Entry
- a3ComSysBridgePortAddressEntry 1.3.6.1.4.1.43.29.4.10.5.1 (defined in A3COM-SWITCHING-SYSTEMS-MIB)
An bridge port address entry contains information about a particular bridge port address. To create a new entry, set an instance of a3ComSysBridgePortAddressRemoteAddress with the address index portion of the instance set to 0, to a valid value. To remove an entry, set the instance of the a3ComSysBridgePortAddressType for the entry to invalid(2). - Sys Bridge Port Address Bridge Index
- a3ComSysBridgePortAddressBridgeIndex 1.3.6.1.4.1.43.29.4.10.5.1.1 (defined in A3COM-SWITCHING-SYSTEMS-MIB)
The index of the bridge identified by this entry, relative to this agent. - Sys Bridge Port Address Port Index
- a3ComSysBridgePortAddressPortIndex 1.3.6.1.4.1.43.29.4.10.5.1.2 (defined in A3COM-SWITCHING-SYSTEMS-MIB)
The index of the bridge port identified by this entry, within the bridge identified by this entry. - Sys Bridge Port Address Index
- a3ComSysBridgePortAddressIndex 1.3.6.1.4.1.43.29.4.10.5.1.3 (defined in A3COM-SWITCHING-SYSTEMS-MIB)
The index of this address entry within the bridge address table for the bridge identified by this entry. This index ranges from 1 to the corresponding value of a3ComSysBridgeAddressTableSize. - Sys Bridge Port Address Remote Address
- a3ComSysBridgePortAddressRemoteAddress 1.3.6.1.4.1.43.29.4.10.5.1.4 (defined in A3COM-SWITCHING-SYSTEMS-MIB)
The remote MAC address detected on the bridge port identified by to this entry. Setting this object results in an attempt to create a new entry in the table. Since the value of a3ComSysBridgePortAddressIndex is determined automatically internal to the bridge, a set is only successful if the index value specified for a3ComSysBridgePortAddressIndex is zero. A get-next using the values of a3ComSysBridgePortAddressTypeIndex and a3ComSysBridgePortAddressPortIndex can be used to determine the address index assigned to the newly added address entry. - Sys Bridge Port Address Type
- a3ComSysBridgePortAddressType 1.3.6.1.4.1.43.29.4.10.5.1.5 (defined in A3COM-SWITCHING-SYSTEMS-MIB)
This object, when read, always returns the value valid(1). Setting this object to invalid(2) will remove the corresponding address entry from the table. - Sys Bridge Port Address Is Static
- a3ComSysBridgePortAddressIsStatic 1.3.6.1.4.1.43.29.4.10.5.1.6 (defined in A3COM-SWITCHING-SYSTEMS-MIB)
A value indicating whether this MAC address was statically configured or was dynamically learned. Note that isStatic(1) it the only valid for set operations. - Sys Bridge Port Address Static Port
- a3ComSysBridgePortAddressStaticPort 1.3.6.1.4.1.43.29.4.10.5.1.7 (defined in A3COM-SWITCHING-SYSTEMS-MIB)
If the corresponding value of the object a3ComSysBridgePortAddressIsStatic is isStatic(1), this object indicates the local bridge port index (as reported by a3ComSysBridgePortLocalIndex) for which this address MAC was statically configured. If the object a3ComSysBridgePortAddressIsStatic has the value isDynamic(2), the value of this object is 0. - Sys Bridge Port Address Age
- a3ComSysBridgePortAddressAge 1.3.6.1.4.1.43.29.4.10.5.1.8 (defined in A3COM-SWITCHING-SYSTEMS-MIB)
This object indicates the time, in seconds, elapsed since a packet containing this address as a source was last seen on the bridge port identified by this entry. - dot1d Base Bridge Address
- dot1dBaseBridgeAddress 1.3.6.1.2.1.17.1.1 (defined in BRIDGE-MIB)
The MAC address used by this bridge when it must be referred to in a unique fashion. It is recommended that this be the numerically smallest MAC address of all ports that belong to this bridge. However it is only required to be unique. When concatenated with dot1dStpPriority a unique BridgeIdentifier is formed which is used in the Spanning Tree Protocol. - v Lan Bridge Address
- vLanBridgeAddress 1.3.6.1.4.1.800.2.2.1.2.1.2 (defined in XYLAN-VLAN-MIB)
The MAC address used by the instance of VLAN which specified in vLanCurrentNumber when it must be referred to in a unique fashion. It is recommended that this be the numerically smallest MAC address of all ports that belong to this VLAN. However it is only required to be unique. When concatenated with vStpPriority a unique BridgeIdentifier is formed which is used in the Spanning Tree Protocol. - v Stp Bridge Address
- vStpBridgeAddress 1.3.6.1.4.1.800.2.2.5.3 (defined in XYLAN-VLAN-MIB)
The bridge identifier of this VLAN of the spanning tree as determined by the Spanning Tree Protocol as executed by this VLAN. - dot1d Base Bridge Address
- dot1dBaseBridgeAddress 1.3.6.1.2.1.17.1.1 (defined in rfc1493)
The MAC address used by this bridge when it must be referred to in a unique fashion. It is recommended that this be the numerically smallest MAC address of all ports that belong to this bridge. However it is only required to be unique. When concatenated with dot1dStpPriority a unique BridgeIdentifier is formed which is used in the Spanning Tree Protocol. - Cisco Bridge Control Protocol Config Mac Address Control
- bcpConfigMacAddressControl 1.3.6.1.4.1.9.9.275.1.2.1.8 (defined in CISCO-BCP-MIB)
The Mac-Address configuration option enables the implementations to announce its MAC address or have one assigned. When enabled the local BCP Entity initiates a Mac-Address Option negotiation. - Cisco Bridge Control Protocol Config Mac Address
- bcpConfigMacAddress 1.3.6.1.4.1.9.9.275.1.2.1.9 (defined in CISCO-BCP-MIB)
This value is meaningful only when the local BCP entity has negotiated the MAC-Address configuration option, which means the value of bcpConfigMacAddressControl is enabled(1). If it is non-zero format, the local BCP get its MAC address announced. It is represented in IEEE 802.1 Canonical format. If it is in zero format, i.e. 00-00-00-00-00-00 then the implementation of the system wishes to have a MAC address assigned. - Cisco Bridge Dot1d Static Address
- cbeDot1dStaticAddress 1.3.6.1.4.1.9.9.401.1.2.1.1.2 (defined in CISCO-BRIDGE-EXT-MIB)
The destination MAC address in a frame to which this entry's filtering information applies. This object can take the value of a unicast address, a group address or the broadcast address.
