The objects described here can be monitored with the IPHost Network Monitor.
You can start SNMP monitoring using free 30-day trial version of IPHost right now.
OID list for "port link"
- Sys Ethernet Port Link Status
- a3ComSysEthernetPortLinkStatus 1.3.6.1.4.1.43.29.4.8.2.1.4 (defined in A3COM-SWITCHING-SYSTEMS-MIB)
The current value of the link status for the ethernet port identified by this entry. - qsim Port Link Type
- qsimPortLinkType 1.3.6.1.4.1.43.1.12.3.1.1.12.2.1.1.1 (defined in 3comab9300)
Link layer protocol supported by the port. - hsim Port Link Type
- hsimPortLinkType 1.3.6.1.4.1.43.1.12.3.1.1.12.3.1.1.1 (defined in 3comab9300)
Link layer protocol supported by the port. - snmp Fddi PORT Link Error Rate Estimate
- snmpFddiPORTLerEstimate 1.3.6.1.2.1.10.15.4.2.1.15 (defined in rfc1285)
A long term average link error rate. It ranges from 10**-4 to 10**-15 and is reported as the absolute value of the exponent of the estimate. - snmp Fddi PORT Link Error Rate Cutoff
- snmpFddiPORTLerCutoff 1.3.6.1.2.1.10.15.4.2.1.18 (defined in rfc1285)
The link error rate estimate at which a link connection will be broken. It ranges from 10**-4 to 10**-15 and is reported as the absolute value of the exponent. - snmp Fddi PORT Link Error Rate Alarm
- snmpFddiPORTLerAlarm 1.3.6.1.2.1.10.15.4.2.1.19 (defined in rfc1285)
The link error rate estimate at which a link connection will generate an alarm. It ranges from 10**-4 to 10**-15 and is reported as the absolute value of the exponent of the estimate. - snmp Fddi PORT Link Error Rate Condition
- snmpFddiPORTLerCondition 1.3.6.1.2.1.10.15.4.2.1.23 (defined in rfc1285)
This variable is set to true whenever LerEstimate is less than or equal to LerAlarm. - fddimib PORT Link Error Rate Estimate
- fddimibPORTLerEstimate 1.3.6.1.2.1.10.15.73.5.2.1.15 (defined in rfc1512)
A long term average link error rate. It ranges from 10**-4 to 10**-15 and is reported as the absolute value of the base 10 logarithm (refer to ANSI SMT 9.4.7.5.). - fddimib PORT Link Error Rate Cutoff
- fddimibPORTLerCutoff 1.3.6.1.2.1.10.15.73.5.2.1.18 (defined in rfc1512)
The link error rate estimate at which a link connection will be broken. It ranges from 10**-4 to 10**-15 and is reported as the absolute value of the base 10 logarithm (default of 7). - fddimib PORT Link Error Rate Alarm
- fddimibPORTLerAlarm 1.3.6.1.2.1.10.15.73.5.2.1.19 (defined in rfc1512)
The link error rate estimate at which a link connection will generate an alarm. It ranges from 10**-4 to 10**-15 and is reported as the absolute value of the base 10 logarithm of the estimate (default of 8). - fddimib PORT Link Error Rate Flag
- fddimibPORTLerFlag 1.3.6.1.2.1.10.15.73.5.2.1.23 (defined in rfc1512)
The condition becomes active when the value of fddiPORTLerEstimate is less than or equal to fddiPORTLerAlarm. This will be reported with the Status Report Frames (SRF) (refer to ANSI SMT 7.2.7 and 8.3). - IBM APPN Node Port Link Stations Role
- ibmappnNodePortLsRole 1.3.6.1.4.1.2.6.2.13.1.4.1.1.6 (defined in rfc1593)
Initial role for LSs activated through this port, where 'abm' indicates asynchronous balance mode. - Cabletron If Port Link Status
- ctIfPortLinkStatus 1.3.6.1.4.1.52.4.3.3.3.1.1.4 (defined in ctif-ext-mib)
Defines the status of the port connection. - Token Ring Port Station Port Link State
- tRingPortStnPortLinkState 1.3.6.1.4.1.52.4.1.2.1.1.3.2.1.1.3 (defined in dot5-log-mib)
This object reports the link status of a port. The link status indicates the port is detecting a good phantom current. - Token Ring Port Station Port Link State Time
- tRingPortStnPortLinkStateTime 1.3.6.1.4.1.52.4.1.2.1.1.3.2.1.1.4 (defined in dot5-log-mib)
This object reports the amount of time in TimeTicks since the port's link state last changed. - dot5 Physical Management Port Station Port Link State
- dot5PhysMgmtPortStnPortLinkState 1.3.6.1.4.1.52.4.1.1.6.1.3.2.1.1.3 (defined in dot5-phys-mib)
This object reports the link status of a token ring station port. The link status indicates the port is detecting a good phantom current. - dot5 Physical Management Port Station Port Link State Time
- dot5PhysMgmtPortStnPortLinkStateTime 1.3.6.1.4.1.52.4.1.1.6.1.3.2.1.1.4 (defined in dot5-phys-mib)
This object reports the amount of time in TimeTicks since the token ring station port's link state last changed. - port Link Speed
- portLinkSpeed 1.3.6.1.4.1.52.259.10.3.2.4.1.1.3 (defined in elh100-mib)
The speed at which the port is currently operating. If there is no link on the port, this object returns noLink(1). - switch Port Link
- switchPortLink 1.3.6.1.4.1.52.259.10.3.4.1.1.1.6 (defined in elh100-mib)
Indicates if link is detected on the port. If the port is inactive (port 2 on media modules and port 3 on internal switch modules), noLink(2) is returned. - agent Port Link Trap Mode
- agentPortLinkTrapMode 1.3.6.1.4.1.14179.1.2.12.1.9 (defined in AIRESPACE-SWITCHING-MIB)
If enabled, link up and link down traps will be sent for this port. - appn Port Link Station Role
- appnPortLsRole 1.3.6.1.2.1.34.4.1.1.4.1.1.7 (defined in APPN-MIB)
Initial role for link stations activated through this port. The values map to the following settings in the initial XID, where 'ABM' indicates asynchronous balanced mode and 'NRM' indicated normal response mode: primary(1): ABM support = 0 ( = NRM) role = 01 ( = primary) secondary(2): ABM support = 0 ( = NRM) role = 00 ( = secondary) negotiable(3): ABM support = 0 ( = NRM) role = 11 ( = negotiable) abm(4): ABM support = 1 ( = ABM) role = 11 ( = negotiable) - Cisco 90i Port Link Errors
- frxPortLinkErrors 1.3.6.1.4.1.1570.1.5.2.1.2 (defined in CISCO-90-MIB)
Number of signaling link reliability errors from subscriber port. A signaling reliability error is declared whenever the channel units did not receive an Annex-D link integrity poll or full status inquiry poll from the subscriber port within the required time. - Cisco Network Office Switch Port Link Status
- cnosPortLinkStatus 1.3.6.1.4.1.9.10.43.1.3.1.1.8 (defined in CISCO-CNO-SWITCH-MIB)
The current port link status.
