The objects described here can be monitored with the IPHost Network Monitor.
You can start SNMP monitoring using free 30-day trial version of IPHost right now.
OID list for port error
- Sys Bridge Port Receive Error Discards
- a3ComSysBridgePortReceiveErrorDiscards 1.3.6.1.4.1.43.29.4.10.3.1.13 (defined in A3COM-SWITCHING-SYSTEMS-BRIDGE-MIB)
The number of frames discarded by the bridge port identified by this entry because of internal bridge system errors (e.g., hardware and software address table discrepencies). - Fddi PORT EB Error Ct
- a3ComFddiPORTEBErrorCt 1.3.6.1.4.1.43.29.10.4.1.1.4 (defined in A3COM-SWITCHING-SYSTEMS-FDDI-MIB)
A count that should as closely as possible match the times an Elasticity Buffer Error has occurred while in active line state. - Sys Bridge Port Receive Error Discards
- a3ComSysBridgePortReceiveErrorDiscards 1.3.6.1.4.1.43.29.4.10.3.1.13 (defined in A3COM-SWITCHING-SYSTEMS-MIB)
The number of frames discarded by the bridge port identified by this entry because of internal bridge system errors (e.g., hardware and software address table discrepencies). - tsm Operation Port Adapt Error Rate
- tsmOperPortAdaptErrRate 1.3.6.1.4.1.800.2.19.1.2.1.1.12 (defined in TSMEXT-MIB)
The operational adaptive error rate in percent of the port. This value is the percent of errors in the last sampling period. - dsx1 Port Statistics Crc Error Event
- dsx1PortStatsCrcErrorEvent 1.3.6.1.4.1.800.2.11.1.2.1.10 (defined in XYLAN-DS1-MIB)
Total number of ESF CRC-6 Error events for T1 or CRC-4 Error Events for E1 that have been detected on this port. - dsx1 Port Statistics Far End Block Error
- dsx1PortStatsFarEndBlkError 1.3.6.1.4.1.800.2.11.1.2.1.15 (defined in XYLAN-DS1-MIB)
Total number of Far End Block Error events that have been detected on this port. This object only applies to E1 port. - dsx1 Port Statistics Framing Bit Error
- dsx1PortStatsFramingBitError 1.3.6.1.4.1.800.2.11.1.2.1.16 (defined in XYLAN-DS1-MIB)
Total number of Framing Bit Error events that have been detected on this port. - dsx3 Port Statistics Parity Bit Error
- dsx3PortStatsParityBitError 1.3.6.1.4.1.800.2.11.2.2.1.12 (defined in XYLAN-DS3-MIB)
Total number of parity bit errors that have been detected on this port. - dsx3 Port Statistics Payload Type Mismatch Error
- dsx3PortStatsPayloadTypeMismatchError 1.3.6.1.4.1.800.2.11.2.2.1.20 (defined in XYLAN-DS3-MIB)
Total number of payload type mismatch failure that have been detected on this port. This object is applicable to E3 G.832 only. A value of zero is returned if the port is not configured as E3 and G.832. - dsx3 Port Interval Far End Block Error
- dsx3PortIntervalFarEndBlkError 1.3.6.1.4.1.800.2.11.2.3.1.10 (defined in XYLAN-DS3-MIB)
Total number of far-end block error events that have been received on this port since it's cleared by the managing station. - dsx3 Port Interval Framing Bit Error
- dsx3PortIntervalFramingBitError 1.3.6.1.4.1.800.2.11.2.3.1.12 (defined in XYLAN-DS3-MIB)
Total number of Framing Bit Error events that have been detected on this port since it's cleared by the managing station. - dsx3 Port Interval Path Parity Bit Error
- dsx3PortIntervalPathParityBitError 1.3.6.1.4.1.800.2.11.2.3.1.15 (defined in XYLAN-DS3-MIB)
Total number of path parity bit errors that have been detected on this port since it's cleared by the managing station. - dsx3 Port Interval Plcp Framing Error
- dsx3PortIntervalPlcpFramingError 1.3.6.1.4.1.800.2.11.2.3.1.20 (defined in XYLAN-DS3-MIB)
Total number of PLCP Framing Octet Errors that have been detected on this port since it's cleared by the managing station. A value of zero is returned if port sublayer is not PLCP. - dsx3 Port Interval Plcp BIP Error
- dsx3PortIntervalPlcpBIPError 1.3.6.1.4.1.800.2.11.2.3.1.21 (defined in XYLAN-DS3-MIB)
Total number of PLCP Bit Interleaved Parity Errors that have detected on this port since it's cleared by the managing station. A value of zero is returned if port sublayer is not PLCP. - dsx3 Port Interval Unequipped Error
- dsx3PortIntervalUnequippedError 1.3.6.1.4.1.800.2.11.2.3.1.23 (defined in XYLAN-DS3-MIB)
Total number of unequipped failure that have been detected on this port sinece it's cleared by the managing station. This object is applicable to E3 G.832 only. A value of zero is returned if the port is not configured as E3 and G.832. - oc3 Port Corrected HCS Error Cells
- oc3PortCorrectedHCSErrorCells 1.3.6.1.4.1.43.1.12.3.1.1.16.2.1.1.3 (defined in 3comab9300)
The counter associated with the HCS errored cells whose errors were correctable, encountered on the ATM interface. - oc3 Port Uncorrected HCS Error Cells
- oc3PortUncorrectedHCSErrorCells 1.3.6.1.4.1.43.1.12.3.1.1.16.2.1.1.4 (defined in 3comab9300)
The counter associated with the HCS errored cells whose errors were uncorrectable, encountered on the ATM interface. - ds3 Port HCS Error Cells
- ds3PortHCSErrorCells 1.3.6.1.4.1.43.1.12.3.1.1.11.2.1.1.4 (defined in C-PRODUCT-DS3-MIB)
The counter associated with the HCS errored cells, encountered on the ATM interface. - e3 Port HCS Error Cells
- e3PortHCSErrorCells 1.3.6.1.4.1.43.1.12.3.1.1.13.2.1.1.4 (defined in C-PRODUCT-E3-MIB)
The counter associated with the HCS errored cells, encountered on the ATM interface. - snmp Fddi PORT Link Error Rate Cutoff
- snmpFddiPORTLerCutoff 1.3.6.1.2.1.10.15.4.2.1.18 (defined in rfc1285)
The link error rate estimate at which a link connection will be broken. It ranges from 10**-4 to 10**-15 and is reported as the absolute value of the exponent. - snmp Fddi PORT Link Error Rate Alarm
- snmpFddiPORTLerAlarm 1.3.6.1.2.1.10.15.4.2.1.19 (defined in rfc1285)
The link error rate estimate at which a link connection will generate an alarm. It ranges from 10**-4 to 10**-15 and is reported as the absolute value of the exponent of the estimate. - fddimib PORT Link Error Rate Alarm
- fddimibPORTLerAlarm 1.3.6.1.2.1.10.15.73.5.2.1.19 (defined in rfc1512)
The link error rate estimate at which a link connection will generate an alarm. It ranges from 10**-4 to 10**-15 and is reported as the absolute value of the base 10 logarithm of the estimate (default of 8). - fps Port Special Ports Error
- fpsPortSpecialPortsError 1.3.6.1.4.1.52.4.1.2.11.2.2.3.1.20 (defined in ctfps-mib)
This object represents whether or not this port has been selected to receive errored frames - bdg Port Dis Error
- bdgPortDisErr 1.3.6.1.4.1.173.7.9.1.2.11 (defined in ctron-bdg-mib)
The number of frames that could not be transmitted because the frame was too large for the attached network (1526 bytes, including preamble, for 802.3 networks). - bdg Port CRC Error
- bdgPortCRCErr 1.3.6.1.4.1.173.7.9.1.2.15 (defined in ctron-bdg-mib)
The number of packets detected with Cyclical Redundancy Check failures. - bdg Port Frame Alarm Error
- bdgPortFrAlErr 1.3.6.1.4.1.173.7.9.1.2.16 (defined in ctron-bdg-mib)
The number of errors due to misaligned packets. - port Error Enable
- portErrorEnable 1.3.6.1.4.1.43.1.12.3.1.1.6.5.3.3.1 (defined in irm3-mib)
Enable the sending of port level error alarms. - port Bsci Admin Error Retransmit Count
- portBsciAdminErrorRetransmitCount 1.3.6.1.4.1.173.7.3.4.1.1.24 (defined in netlink-specific-mib)
resend a block of data after the receiving device has detected an error in that block. - port Threshold FCS Error Per Sec
- portThreshFCSErrPerSec 1.3.6.1.4.1.173.7.8.2.2.1.6 (defined in netlink-specific-mib)
The threshold for FCS errors per second on the port. - port Error Enable
- portErrorEnable 1.3.6.1.4.1.43.1.12.3.1.1.6.5.3.3.1 (defined in repeater-mib-2)
Enable or disable the checking for port level error thresholds getting exceeded. - port Error Threshold
- portErrorThreshold 1.3.6.1.4.1.43.1.12.3.1.1.6.5.3.3.2 (defined in repeater-mib-2)
The percentage of errors per good packet detected by the specified port within the device timebase that will cause a port error alarm trap to be sent. The minimum is 1, the maximum is 100. - port Error Source
- portErrorSource 1.3.6.1.4.1.43.1.12.3.1.1.6.5.3.3.3 (defined in repeater-mib-2)
The type of errors used for the port error alarm. The INTEGER is a bit encoded version of which errors to include in the error sum. The bits are encoded as follows: CRC_errors - Bit 0 - Least Significant Bit runts - Bit 1 OOW_colls - Bit 2 align_errs - Bit 3 No_resource - Bit 4 Giants - Bit 5 - Repeater Port Group Alarm Error Group Disable
- rptrPortGrpAlarmErrGrpDisable 1.3.6.1.4.1.52.4.1.1.1.4.2.3.1.11 (defined in repeater-rev4-mib)
Set will permit a port group to be disabled on an error alarm condition. Get will show whether the port group disabling is allowed or not. - Repeater Port Alarm Error Enable
- rptrPortAlarmErrEnable 1.3.6.1.4.1.52.4.1.1.1.4.3.3.1.9 (defined in repeater-rev4-mib)
Get returns whether error alarms are enabled/disabled. Set allows for enabling/disabling of error alarms. - Repeater Port Alarm Error Threshold
- rptrPortAlarmErrThreshold 1.3.6.1.4.1.52.4.1.1.1.4.3.3.1.10 (defined in repeater-rev4-mib)
Get/Set the percentage of errors per good packet within the timebase that will cause an alarm. - Repeater Port Alarm Error Source
- rptrPortAlarmErrSource 1.3.6.1.4.1.52.4.1.1.1.4.3.3.1.11 (defined in repeater-rev4-mib)
Get/Set a bit encoded map of which errors to include in the error sum, as follows: CRC_errors - Bit 0 - Least Significant Bit runts - Bit 1 OOW_colls - Bit 2 align_errs - Bit 3 undefined - Bit 4 Giants - Bit 5 - Cisco 2900 Port Rx Fcs Error Frames
- c2900PortRxFcsErrFrames 1.3.6.1.4.1.9.9.87.1.4.2.1.6 (defined in CISCO-C2900-MIB)
The total number of frames received with FCS errors. This total includes all frames received with an FCS error and an integral number of bytes. Unlike RFC1650's dot3StatsFCSErrors, this object does not include frames which are less than the minimum packet size (such as collision fragments).
