OIDs - protocol_operation monitor
The objects described here can be monitored with the IPHost Network Monitor.
You can start SNMP monitoring using free 30-day trial version of IPHost right now.
OID list for protocol operation
- lapb Operation Protocol Version Id
- lapbOperProtocolVersionId 1.3.6.1.2.1.10.16.2.1.14 (defined in rfc1381)
This object identifies the version of the lapb protocol implemented by this interface. - x25 Operation Protocol Version Supported
- x25OperProtocolVersionSupported 1.3.6.1.2.1.10.5.2.1.25 (defined in rfc1382)
Identifies the version of the X.25 protocol this interface supports. Object identifiers for common versions are defined below in the x25ProtocolVersion subtree. - Network AppleTalk Protocol Operation STATUS
- nwAtProtoOperSTATUS 1.3.6.1.4.1.52.4.2.2.2.3.4.2.4.1.1.1.1.2 (defined in ctron-appletalk-router-mib)
Indicates the current operating condition of the AppleTalk Routing Services distance-vector-based routing protocol, system-wide. The value of nwAtProtoOperStatus indicates any problem with the routing protocol configuration. A value of 6 indicates that regardless of the value of nwAtProtoAdminStatus, the routing protocol is not operating because of an invalid configuration. - Network AppleTalk Protocol If Operation STATUS
- nwAtProtoIfOperSTATUS 1.3.6.1.4.1.52.4.2.2.2.3.4.2.4.1.1.2.1.1.1.3 (defined in ctron-appletalk-router-mib)
Indicates the current operating condition of the AppleTalk routing protocol on the router port for which the entry exists. The value of nwAtProtoIfOperStatus indicates any problem with your AppleTalk routing protocol configuration on the router port. A value of 6 indicates that regardless of the value of nwAtProtoIfAdminStatus, the routing protocol is not operating on the router port because of an invalid configuration. - Network DECnet IV Protocol Operation Status
- nwDecIVProtoOperStatus 1.3.6.1.4.1.52.4.2.2.2.3.3.2.4.1.1.1.1.2 (defined in ctron-deciv-router-mib)
Indicates the current operating condition of the DECnet Phase IV distance-vector-based routing protocol system-wide. The value of nwDecIVProtoOperStatus indicates any problem with the DECnet Phase IV distance-vector-based routing protocol configuration. A value of 6 indicates that regardless of the value of nwDecIVProtoAdminStatus, the DECnet Phase IV distance-vector-based routing protocol is not operating because of an invalid configuration. - Network DECnet IV Protocol If Operation Status
- nwDecIVProtoIfOperStatus 1.3.6.1.4.1.52.4.2.2.2.3.3.2.4.1.1.2.1.1.1.3 (defined in ctron-deciv-router-mib)
Indicates the current operating condition of the DECnet Phase IV distance-vector-based routing protocol on the router port for which the entry exists. The value of nwDecIVProtoIfOperStatus indicates any problem with your routing protocol configuration on the router port. A value of 6 indicates that regardless of the value of nwDecIVProtoIfAdminStatus, the routing protocol is not operating because of an invalid configuration. - Network Routing Protocol Operation Status
- nwRtgProtocolOperStatus 1.3.6.1.4.1.52.4.2.2.2.2.2.1.1.1.4 (defined in ctron-routers-mib)
Indicates the current operating condition of the routing protocol for which the entry exists. - Network Routing Protocol If Operation Status
- nwRtgProtocolIfOperStatus 1.3.6.1.4.1.52.4.2.2.2.2.2.2.1.1.5 (defined in ctron-routers-mib)
Indicates the current operating condition of the routing protocol on this router port for which the entry exists. - Cisco Bridge Control Protocol Operation Table
- bcpOperTable 1.3.6.1.4.1.9.9.275.1.1 (defined in CISCO-BCP-MIB)
Table containing the status of the local BCP entity that is related to the operation of Bridging Control Protocol. - Cisco Bridge Control Protocol Operation Entry
- bcpOperEntry 1.3.6.1.4.1.9.9.275.1.1.1 (defined in CISCO-BCP-MIB)
Operational status information for a particular BCP link. For all entries in ifTable with ifType ppp(23), there will be an entry in this table. - Cisco Bridge Control Protocol Operation Status
- bcpOperStatus 1.3.6.1.4.1.9.9.275.1.1.1.1 (defined in CISCO-BCP-MIB)
The operational status of the Bridge Control Protocol. The possible values are : open(1) - the BCP link is up and both ends are configured in the compatible manner. closed(2) - the BCP link is down and neither ends are configured. listening(3) - the local BCP entity is configured and the remote end is not configured compatibly. - ibm Bbcm Protocol Operation Status
- ibmBbcmProtocolOperStatus 1.3.6.1.4.1.2.5.8.4.2.1.3.1.2 (defined in ibm-ibmlanex)
The current BBCM Status Note for this implementation other is defined only to be consistent with standard LE server MIBs, it has no meaning for the definition. - vrrp Operation Protocol
- vrrpOperProtocol 1.3.6.1.2.1.68.1.3.1.14 (defined in ibm-vrrp)
The particular protocol being controlled by this Virtual Router.