The objects described here can be monitored with the IPHost Network Monitor.
You can start SNMP monitoring using free 30-day trial version of IPHost right now.
OID list for router id
- ospf Local LS Database Router Id
- ospfLsdbRouterId 1.3.6.1.2.1.14.4.1.4 (defined in rfc1253)
The 32 bit number that uniquely identifies the originating router in the Autonomous System. - ospf Neighbor Router Id
- ospfNbrRtrId 1.3.6.1.2.1.14.10.1.3 (defined in rfc1850)
A 32-bit integer (represented as a type IpAd- dress) uniquely identifying the neighboring router in the Autonomous System. - ospf Ext Local LS Database Router Id
- ospfExtLsdbRouterId 1.3.6.1.2.1.14.12.1.3 (defined in rfc1850)
The 32 bit number that uniquely identifies the originating router in the Autonomous System. - Network AppleTalk Sys Router Id
- nwAtSysRouterId 1.3.6.1.4.1.52.4.2.2.2.3.4.2.1.1.1 (defined in ctron-appletalk-router-mib)
The AppleTalk node address used to uniquely identify the host (device) running the AppleTalk Routing Services. The value of nwAtSysRouterId is equal to the highest AppleTalk node address assigned to any router port. - Network Appn Sys Router Id
- nwAppnSysRouterId 1.3.6.1.4.1.52.4.2.2.2.3.5.2.1.1.1 (defined in ctron-appn-mib)
Specifies the APPN Fully-Qualified Control Point name that is used to uniquely identify APPN Routing Services in an APPN network. The name format is NNNNNNNN.CCCCCCCC where NNNNNNNN is the network identifier and CCCCCCCC is the Control Point name. Valid characters to make up these two strings are uppercase letters A through Z, numerics 0 through 9, and the special characters $, @, and #. The first character of the string must NOT be numeric. Each string must be a maximum length of 8 characters with no embedded spaces and the strings are joined by a dot. nwAppnSysRouterId cannot be modified while APPN routing services is in any operational state other than DISABLED as reflected in nwAppnSysOperStatus. Otherwise, the request will be rejected. - Network DECnet IV Sys Router Id
- nwDecIVSysRouterId 1.3.6.1.4.1.52.4.2.2.2.3.3.2.1.1.1 (defined in ctron-deciv-router-mib)
The DECnet Address used to uniquely identify the host (device) running DECnet Phase IV Routing Services. Since DECnet Phase IV uses a single address to identify the host and all of its router ports, rather than using an address per router port, nwDecIVSysRouterID is the DECnet node address for all the router ports on the device. - Cabletron IGMP Discovered Router Vlan Id
- ctIGMPDiscoveredRouterVlanId 1.3.6.1.4.1.52.4.1.3.5.1.8.1.2 (defined in ctron-igmp-mib)
The VlanId for IGMP to send multicast data to. - Network Ip Sys Router Id
- nwIpSysRouterId 1.3.6.1.4.1.52.4.2.2.2.3.1.2.1.1.1 (defined in ctron-ip-router-mib)
The IP Address used to uniquely identify the host (device) running IP Routing Services. The value of nwIpSysRouterId is equal to the highest IP Address in the IP Address Table. - Network Ipx Sys Router Id
- nwIpxSysRouterId 1.3.6.1.4.1.52.4.2.2.2.3.2.2.1.1.1 (defined in ctron-ipx-router-mib)
The IPX Address used to uniquely identify the host (device) running IPX Routing Services. The value of nwIpxSysRouterId is equal to the highest IPX address assigned in the IPX Address Table. - sfps Multicast IP Router Vlan Id
- sfpsMcastIPRouterVlanId 1.3.6.1.4.1.52.4.2.4.2.5.2.1.1.1.2 (defined in ctron-sfps-mcast-mib)
- sfps Multicast IP Router API Vlan Id
- sfpsMcastIPRouterAPIVlanId 1.3.6.1.4.1.52.4.2.4.2.5.2.1.6 (defined in ctron-sfps-mcast-mib)
- Cisco Enhanced Interior Gateway Protocol Autonomous System Router Id
- cEigrpAsRouterId 1.3.6.1.4.1.9.9.449.1.2.1.1.18 (defined in CISCO-EIGRP-MIB)
The router-id configured or automatically selected for the EIGRP AS. Each EIGRP routing process has a unique router-id selected from each autonomous system configured. The format is governed by object cEigrpAsRouterIdType. - vrrp Router Virtual Router Id Errors
- vrrpRouterVrIdErrors 1.3.6.1.2.1.68.2.3 (defined in ibm-vrrp)
The total number of VRRP packets received with an invalid VRID for this virtual router. - Juniper Js Packet Mirror Router Id
- jnxJsPacketMirrorRouterId 1.3.6.1.4.1.2636.3.39.1.16.1.1.1.12 (defined in JUNIPER-JS-PACKET-MIRROR-MIB)
The VRF ID in JUNOS. Represented as the Logical Router (LR) Name followed by the Router Instance (RI) Name. - Juniper Ospfv3 Area Lsdb Router Id
- jnxOspfv3AreaLsdbRouterId 1.3.6.1.4.1.2636.5.4.1.1.4.1.3 (defined in JUNIPER-OSPFV3-MIB)
The 32-bit number that uniquely identifies the originating router in the Autonomous System. - Juniper Ospfv3 Link Lsdb Router Id
- jnxOspfv3LinkLsdbRouterId 1.3.6.1.4.1.2636.5.4.1.1.5.1.4 (defined in JUNIPER-OSPFV3-MIB)
The 32 bit number that uniquely identifies the originating router in the Autonomous System. - Switch L3 Ospf External Lsdb Router Id
- swL3OspfExternalLsdbRouterId 1.3.6.1.4.1.171.11.70.5.3.13.2.1.3 (defined in DES3528-SWL3MGMT-MIB)
The 32 bit number that uniquely identifies the originating router in the Autonomous System. - Switch L3 Ospf External Lsdb Router Id
- swL3OspfExternalLsdbRouterId 1.3.6.1.4.1.171.11.70.5.3.13.2.1.3 (defined in DES3552-SWL3MGMT-MIB)
The 32 bit number that uniquely identifies the originating router in the Autonomous System. - Switch L3 Ospf External Lsdb Router Id
- swL3OspfExternalLsdbRouterId 1.3.6.1.4.1.171.11.70.5.3.13.2.1.3 (defined in DES3612-SWL3MGMT-MIB)
The 32 bit number that uniquely identifies the originating router in the Autonomous System. - Switch L3 Ospf External Lsdb Router Id
- swL3OspfExternalLsdbRouterId 1.3.6.1.4.1.171.11.70.5.3.13.2.1.3 (defined in DES3627-SWL3MGMT-MIB)
The 32 bit number that uniquely identifies the originating router in the Autonomous System. - Switch L3 Ospf External Lsdb Router Id
- swL3OspfExternalLsdbRouterId 1.3.6.1.4.1.171.11.70.5.3.13.2.1.3 (defined in DES3650-SWL3MGMT-MIB)
The 32 bit number that uniquely identifies the originating router in the Autonomous System. - ospf Local Lsdb Router Id
- ospfLocalLsdbRouterId 1.3.6.1.2.1.14.17.1.5 (defined in OSPF-MIB)
The 32-bit number that uniquely identifies the originating router in the Autonomous System. - ospf Autonomous System Lsdb Router Id
- ospfAsLsdbRouterId 1.3.6.1.2.1.14.19.1.3 (defined in OSPF-MIB)
The 32-bit number that uniquely identifies the originating router in the Autonomous System. - ospfv3 Area Lsdb Router Id
- ospfv3AreaLsdbRouterId 1.3.6.1.3.102.1.4.1.3 (defined in OSPFV3-MIB)
The 32 bit number that uniquely identifies the originating router in the Autonomous System. - ospfv3 Link Lsdb Router Id
- ospfv3LinkLsdbRouterId 1.3.6.1.3.102.1.5.1.3 (defined in OSPFV3-MIB)
The 32 bit number that uniquely identifies the originating router in the Autonomous System. - Cisco IS-IS Router ID
- ciiRouterID 1.3.6.1.4.1.9.10.118.1.1.7.1.4 (defined in CISCO-IETF-ISIS-MIB)
The Router ID of the Peer found in LSP, or zero if none. - Alcatel Bgp Router Id
- alaBgpRouterId 1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.1.3 (defined in ALCATEL-IND1-BGP-MIB)
Configured BGP router ID. - Alcatel Drc Tm IP Router Id
- alaDrcTmIPRouterId 1.3.6.1.4.1.6486.800.1.2.1.10.1.1.1.1.2 (defined in ALCATEL-IND1-DRCTM-MIB)
Defines the Router-id for this Router. - Alcatel Ospf Bdr Router Area Id
- alaOspfBdrRouterAreaId 1.3.6.1.4.1.6486.800.1.2.1.10.4.1.1.1.13.1.1 (defined in ALCATEL-IND1-OSPF-MIB)
The area to which the border router belongs to. - Alcatel Ospf Bdr Router Id
- alaOspfBdrRouterId 1.3.6.1.4.1.6486.800.1.2.1.10.4.1.1.1.13.1.2 (defined in ALCATEL-IND1-OSPF-MIB)
The router idenitifer of this border router. - Cajun Lrrp Router Virtual Router Id Errors
- cjnLrrpRouterVrIdErrors 1.3.6.1.4.1.52.4.43.2.19.2.3 (defined in IP-LRRP-MIB)
The total number of LRRP packets received with an invalid VRID for this virtual router. - Cajun Ospf If B Dr Router Id
- cjnOspfIfBDrRouterId 1.3.6.1.4.1.52.4.43.2.9.3.1.9 (defined in OSPF-PRIVATE-MIB)
The router id of the back up designated router on the network the interface belongs to - Cajun Ospf Router Lsdb Area Id
- cjnOspfRouterLsdbAreaId 1.3.6.1.4.1.52.4.43.2.9.11.1.1 (defined in OSPF-PRIVATE-MIB)
- sys Snoop Vlan Router Inst Id
- sysSnoopVlanRouterInstId 1.3.6.1.4.1.207.1.4.167.105.3.3.1.1 (defined in AT-GS950-8-MIB)
Instance ID pertaining to the router port entry. Currently only one instance is supported so it is always 1 - sys Snoop Vlan Router Vlan Id
- sysSnoopVlanRouterVlanId 1.3.6.1.4.1.207.1.4.167.105.3.3.1.2 (defined in AT-GS950-8-MIB)
VLAN ID of the ports through which router is reachable.
