MIBs list
- JNX-IPSEC-MONITOR-MIB
- JNX-L2TP-MIB
- Provides monitoring information regarding
the Layer Two Transport Protocol. This MIB
is based on the standard MIB defined in
RFC 3371. However, there are significant differences
including the INDEX fields of l2tpTunnelStatsTable
and l2tpSessionStatsTable.
- JNX-MPLS-TE-P2MP-STD-MIB
- This MIB module contains managed object definitions
for Point-to-Multipoint (P2MP) MPLS Traffic Engineering (TE)
- JNX-PPP-MIB
- The Point-to-Point Protocol (PPP) MIB for the Juniper enterprise.
- JNX-PPPOE-MIB
- The Point-to-Point Protocol over Ethernet (PPPoE) MIB for the Junos
product family. This MIB contains managed objects for each of
two interface layers: PPPoE interfaces, and PPPoE subinterfaces. For
each of these layers, management objects are provided to query for an
available interface index, and to create/delete interfaces of that type.
- JUNIPER-ALARM-MIB
- This is Juniper Networks' implementation of enterprise
specific MIB for alarms from the router chassis box.
- JUNIPER-ANALYZER-MIB
- This is Juniper Networks' implementation of enterprise specific
MIB for Analyzer and Remote Analyzer. Port mirroring is widely
used in enterprise switches to send a copy of all or sampled
packets seen on a port to an anlyzer on the same or different
switch.
- JUNIPER-ATM-COS-MIB
- The Juniper enterprise MIB for ATM COS (Class Of
Service) infrastructure. For detailed information on ATM
- JUNIPER-ATM-MIB
- The Juniper enterprise MIB for ATM interfaces and VCs
- JUNIPER-BFD-MIB
- Provides BFD specific data.
- JUNIPER-CFGMGMT-MIB
- This MIB module defines objects used for managing the
configuration of Juniper products.
- JUNIPER-CHASSIS-CLUSTER-MIB
- Chassis Clustering is concerned with ensuring minimal disruption to
data and control planes in case of a failover. If one of the chassis in
a cluster fails, the other chassis in the cluster takes over the function
of the failed chassis with minimal service interruption.
This module defines the objects pertaining to Chassis Cluster.
- JUNIPER-CHASSIS-FWDD-MIB
- This is Juniper Networks' implementation of enterprise
specific MIB for J-Series FWDD module from the router chassis box.
- JUNIPER-COLLECTOR-MIB
- Provides data about each of the Collector PICs on a router.
- JUNIPER-COS-MIB
- The Juniper enterprise MIB for COS (Class Of Service)
infrastructure.
- JUNIPER-DCU-MIB
- This is Juniper Networks' implementation of enterprise
specific MIB for Destination Class Usage (DCU)
- JUNIPER-DFC-MIB
- This is Juniper Networks' implementation of enterprise
specific MIB for Dynamic Flow Capture (DFC)
- JUNIPER-DOM-MIB
- This MIB module defines objects used for Digital Optical
Monitor on XFP interface of Juniper products.
- JUNIPER-EVENT-MIB
- This is Juniper Networks implementation of enterprise
specific MIB for generic event notifications.
- JUNIPER-EX-MAC-NOTIFICATION-MIB
- This MIB module is for configuration of the MAC notification
feature. MAC notification is a mechanism to inform monitoring
devices when there are MAC addresses learnt or removed from
the forwarding database of the monitored devices.
- JUNIPER-EXPERIMENT-MIB
- The object identifiers for experimental MIBs for the Juniper Networks,
Inc. products. This is the top-level object identifier registry for
SNMP modules containing experimental MIB definitions.
- JUNIPER-FIREWALL-MIB
- This is Juniper Networks' implementation of enterprise
specific MIB for firewalls filters/policers.
- JUNIPER-HOSTRESOURCES-MIB
- Extends the HOST-RESOURCES-MIB (rfc2790).
- JUNIPER-IF-MIB
- The MIB modules extends the ifTable as
defined in IF-MIB.
- JUNIPER-IPFORWARD-MIB
- This is Juniper Networks' implementation of enterprise specific
portions of ipForward MIB. Any data stored in this MIB
has directly related entries in mib-2, ipForward MIB.
- JUNIPER-IPSEC-FLOW-MON-MIB
- This module defines the object used to monitor the
entries pertaining to IPSec objects and the management
of the IPSEC VPN functionalities.
- JUNIPER-IPv4-MIB
- The MIB modules extends the ifTable as
defined in IF-MIB.
- JUNIPER-IPv6-MIB
- The MIB modules extends the ifTable as
defined in IF-MIB.
- JUNIPER-JDHCP-MIB
- The JUNOS DHCP MIB for the Juniper Networks enterprise.
- JUNIPER-JDHCPV6-MIB
- The JUNOS DHCP MIB for the Juniper Networks enterprise.
- JUNIPER-JS-AUTH-MIB
- Firewall and security features restrict the accessing of protected
resources (ideally on different zones) behind a firewall based
on their source ip and other credentials.
This module defines the objects pertain to access authentication.
- JUNIPER-JS-CERT-MIB
- This module defines the object that are used to monitor
reference and attributes to the certificates.
- JUNIPER-JS-DNS-MIB
- This MIB provides collated statistics for the
Domain Name System (DNS) proxy collected over all
interfaces on which it is configured to serve.
- JUNIPER-JS-IDP-MIB
- This is Juniper Networks' implementation of enterprise
specific MIB for IDP.
- JUNIPER-JS-IF-EXT-MIB
- This module defines the object that are used to monitor
the entries in the interfaces pertaining to the security
management of the interface.
- JUNIPER-JS-IPSEC-VPN-MIB
- This module defines the object used to monitor the
entries pertaining to IPSec objects and the management
of the IPSEC VPN functionalities for Juniper security
product lines.
This mib module extend Juniper's common IPSEC flow monitoring
MIB, building on the existing common infrastruature, the
security implementation integrates the value-added
features for the security products
- JUNIPER-JS-PACKET-MIRROR-MIB
- The packet mirror MIB for the Juniper Networks enterprise.
- JUNIPER-JS-POLICY-MIB
- This module defines the mib for policy monitoring.
A security policy, which can be configured from the user
interface controls the traffic flow from one zone to another
zone by defining the kind(s) of traffic permitted from
specified IP sources to specified IP destinations at
scheduled times.
Juniper security device enforce the security policies rules
for the transit traffic in terms of which traffic can pass
through the firewall, and the actions taken on the traffic as
it passes through the firewall.
- JUNIPER-JS-SCREENING-MIB
- This module defines the MIB for Juniper Enterprise Firewall
screen functionality. Juniper documentation is recommended
as the reference.
Juniper Security Firewall provides various detection methods
and defense mechanisms to combat exploits at all stages of
the path of execution.
- JUNIPER-JS-UTM-AV-MIB
- This module defines the MIB for Juniper Enterprise specific
antivirus functionality. Juniper documentation is recommended
as the reference.
- JUNIPER-L2ALD-MIB
- The MIB modules for L2ALD traps
- JUNIPER-L2CP-FEATURES-MIB
- This mib module is for Juniper Networks Proprietory
Layer 2 control protocol (L2CP) features
- JUNIPER-LDP-MIB
- The MIB modules extends the LDP mib draft.
- JUNIPER-LSYSSP-CPU-MIB
- This module defines the CPU-specific MIB for Juniper Enterprise
Logical-System (LSYS) security profiles. Juniper documentation
is recommended as the reference.
The LSYS security profile provides various static and dynamic
resource management by observing resource quota limits.
Security CPU resource is the focus in this MIB.
- JUNIPER-LSYSSP-FLOWGATE-MIB
- This module defines the flow-gate-specific MIB for Juniper Enterprise
Logical-System (LSYS) security profiles. Juniper documentation
is recommended as the reference.
The LSYS security profile provides various static and dynamic
resource management by observing resource quota limits.
Security flow-gate resource is the focus in this MIB.
- JUNIPER-LSYSSP-FLOWSESS-MIB
- This module defines the flow-session-specific MIB for Juniper Enterprise
Logical-System (LSYS) security profiles. Juniper documentation
is recommended as the reference.
The LSYS security profile provides various static and dynamic
resource management by observing resource quota limits.
Security flow-session resource is the focus in this MIB.
- JUNIPER-LSYSSP-NATCONEBIND-MIB
- This module defines the NAT-cone-bind-specific MIB for
Juniper Enterprise Logical-System (LSYS) security profiles.
Juniper documentation is recommended as the reference.
The LSYS security profile provides various static and dynamic
resource management by observing resource quota limits.
Security NAT-cone-bind resource is the focus in this MIB.
- JUNIPER-LSYSSP-NATDSTPOOL-MIB
- This module defines the NAT-destination-pool-specific MIB for
Juniper Enterprise Logical-System (LSYS) security profiles.
Juniper documentation is recommended as the reference.
The LSYS security profile provides various static and dynamic
resource management by observing resource quota limits.
Security NAT-destination-pool resource is the focus in this MIB.
- JUNIPER-LSYSSP-NATDSTRULE-MIB
- This module defines the NAT-destination-rule-specific MIB for
Juniper Enterprise Logical-System (LSYS) security profiles.
Juniper documentation is recommended as the reference.
The LSYS security profile provides various static and dynamic
resource management by observing resource quota limits.
Security NAT-destination-rule resource is the focus in this MIB.
- JUNIPER-LSYSSP-NATPOIPNUM-MIB
- This module defines the NAT-port-overloading-IP-number-specific
MIB for Juniper Enterprise Logical-System (LSYS) security profiles.
Juniper documentation is recommended as the reference.
The LSYS security profile provides various static and dynamic
resource management by observing resource quota limits.
Security NAT-port-overloading-IP-number resource is the focus in
this MIB.
- JUNIPER-LSYSSP-NATSRCNOPATAD-MIB
- This module defines the NAT-src-no-pat-address-specific MIB for
Juniper Enterprise Logical-System (LSYS) security profiles.
Juniper documentation is recommended as the reference.
The LSYS security profile provides various static and dynamic
resource management by observing resource quota limits.
Security NAT-src-no-pat-address resource is the focus in this MIB.
- JUNIPER-LSYSSP-NATSRCPATAD-MIB
- This module defines the NAT-src-pat-address-specific MIB for
Juniper Enterprise Logical-System (LSYS) security profiles.
Juniper documentation is recommended as the reference.
The LSYS security profile provides various static and dynamic
resource management by observing resource quota limits.
Security NAT-src-pat-address resource is the focus in this MIB.
- JUNIPER-LSYSSP-NATSRCPOOL-MIB
- This module defines the NAT-src-pool-specific MIB for Juniper Enterprise
Logical-System (LSYS) security profiles. Juniper documentation
is recommended as the reference.
The LSYS security profile provides various static and dynamic
resource management by observing resource quota limits.
Security NAT-src-pool resource is the focus in this MIB.
- JUNIPER-LSYSSP-NATSRCRULE-MIB
- This module defines the NAT-source-rule-specific MIB for
Juniper Enterprise Logical-System (LSYS) security profiles.
Juniper documentation is recommended as the reference.
The LSYS security profile provides various static and dynamic
resource management by observing resource quota limits.
Security NAT-source-rule resource is the focus in this MIB.
- JUNIPER-LSYSSP-NATSTATICRULE-MIB
- This module defines the NAT-static-rule-specific MIB for
Juniper Enterprise Logical-System (LSYS) security profiles.
Juniper documentation is recommended as the reference.
The LSYS security profile provides various static and dynamic
resource management by observing resource quota limits.
Security NAT-static-rule resource is the focus in this MIB.
- JUNIPER-LSYSSP-POLICY-MIB
- This module defines the policy-specific MIB for Juniper Enterprise
Logical-System (LSYS) security profiles. Juniper documentation
is recommended as the reference.
The LSYS security profile provides various static and dynamic
resource management by observing resource quota limits.
Security policy resource is the focus in this MIB.
- JUNIPER-LSYSSP-POLICYWCNT-MIB
- This module defines the policy-with-count-specific MIB for
Juniper Enterprise Logical-System (LSYS) security profiles.
Juniper documentation is recommended as the reference.
The LSYS security profile provides various static and dynamic
resource management by observing resource quota limits.
Security policy-with-count resource is the focus in this MIB.
- JUNIPER-LSYSSP-SCHEDULER-MIB
- This module defines the scheduler-specific MIB for Juniper Enterprise
Logical-System (LSYS) security profiles. Juniper documentation
is recommended as the reference.
The LSYS security profile provides various static and dynamic
resource management by observing resource quota limits.
Security scheduler resource is the focus in this MIB.
- JUNIPER-LSYSSP-ZONE-MIB
- This module defines the zone-specific MIB for Juniper Enterprise
Logical-System (LSYS) security profiles. Juniper documentation
is recommended as the reference.
The LSYS security profile provides various static and dynamic
resource management by observing resource quota limits.
Security zone resource is the focus in this MIB.
- JUNIPER-LSYSSPAUTHENTRY-MIB
- This module defines the auth-entry-specific MIB for Juniper Enterprise
Logical-System (LSYS) security profiles. Juniper documentation
is recommended as the reference.
The LSYS security profile provides various static and dynamic
resource management by observing resource quota limits.
Security auth-entry resource is the focus in this MIB.
- JUNIPER-MAC-MIB
- This is Juniper Networks' implementation of enterprise
specific MIB for Ethernet Mac Stats
- JUNIPER-MAG-MIB
- These MIB objects pertain to Secure access,
infranet controller and WAN acceleration service
modules
- JUNIPER-MIB
- The MIB modules representing Juniper Networks'
implementation of enterprise specific MIBs
supported by a single SNMP agent.
- JUNIPER-MIMSTP-MIB
- This mib module is for Juniper Networks Proprietory
Multiple Instance MSTP mib
- JUNIPER-MPLS-LDP-MIB
- JUNIPER-OSPFV3-MIB
- The MIB module for OSPF version 3.
- JUNIPER-OTN-MIB
- This MIB module defines objects used for managing the
OTN interfaces of Juniper products.
- JUNIPER-PAE-EXTENSION-MIB
- This is Juniper Networks' implementation of enterprise
specific MIB for IEEE802.1x PAE Extension MIB. This MIB
Module supports Static MAC Authetication.
- JUNIPER-PFE-MIB
- The MIB provides PFE specific data.
- JUNIPER-PING-MIB
- This is Juniper Networks' implementation of enterprise specific
portions of pingMib. Any data stored in this MIB has directly
related entries in mib-2, pingMIB.
- JUNIPER-PMon-MIB
- This is Juniper Networks' implementation of enterprise
specific MIB for Passive Monitoring PIC
- JUNIPER-POWER-SUPPLY-UNIT-MIB
- The Juniper Supply Unit MIB definitions for enabling
power monitoring and management of a juniper device.
- JUNIPER-SMI
- JUNIPER-SP-MIB
- Provides data about each of the AS Pics on a router
- JUNIPER-SRX5000-SPU-MONITORING-MIB
- This is Juniper Networks' implementation of enterprise
specific MIB for SRX5000 SPU monitoring.
- JWAC-MIB
- The structure of JWAC management for the
proprietary enterprise.
